Can,t get the airport express to see my wireless network

like I said in the subject. I have Verizon Fios. and I have to use there router which is WEP. I have run the airport utility but still no Luck. Can anyone help?

Copied this from another post hope it helps?
Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your Verizon wireless router can be extended wirelessly with the AirPort Express Base Station (AX).

Similar Messages

How can I get the Airport Express to handle all the PPPoE stuff?

Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul

I just changed the channel on my Airport Extreme and now can't get the Airport Express to recognize the network. What do?

I changed the channel on Airport Extreme to get away from interference. Now I can't get my airport express to recognize the network. What do I do?

I would suggest that you perform a "hard" reset on the AirPort Express Base Station (AX), and then, using the AirPort Utility, reconfigure it "join" or "extend" the AirPort Extreme as appropriate for your networking requirements.

HT1126 Can I connect the Airport Express directly to my wireless router?

The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
should I reset the system?

can i connect the airport express into an ethernet port in the wall
I assume you are asking about obtaining an Internet connection here.
First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
If no, then you can connect the Express, but you will not have an Internet connection.

Can't Get The Airport Express Working

OK, So I have researched the forums and tried many different options. My issue is a follows. I have an Airport express G version. It came from a friend and worked fine. When I got it I did a factory reset to clear it all out. I Put the paper clip on the reset, plugged it in and waited for the 4 green flashes. I then plugged it into my laptop through ethernet. All I get is the flashing amber light. I tried to power everything down and then wait 15 minutes per item on the reboots. Still only a flashing amber light.
As a note when I hook it up to my router through ethernet it is steady green.
In all cases I cannot get it to show on the Airpot Utility. Everytime I hit rescan I get nothing found.
Please help!!

ccathcart wrote:
I Put the paper clip on the reset, plugged it in and waited for the 4 green flashes.
actually, to do a +factory restore+, you should unplug the AX, stick in the paperclip while you plug it back in and keep the reset button depressed until the AX flashes amber rapidly (5-10 seconds)
I then plugged it into my laptop through ethernet.
you need to connect the AX to your router with an ethernet cable
As a note when I hook it up to my router through ethernet it is steady green.
that's what you want. If you connect the airPort express to your router with an ethernet cable, the airport express can be configured to create an extension of your main network if you use the same name, wireless mode, security and password as the main network.
post back if you require further assistance

Help!! can't get my airport express to connect to my network

I have set up my airport express to connect to my network so I can play itunes with it but it says that the Airport has been set up but cannot connect To my network. I've tried it on both my computer and my wife's computer and we have the same problem. I have been able to connect in the past with my Airport express that I had for this one but for some reason I can't seem to connect it using this airport express. Any help would be much appreciated.

When joining a non-Apple WEP encrypted wireless network with an AirPort, you must use one of two different styles for password entry depending on whether the network is protected with an ASCII or HEX key.
ASCII password
If using a password that is plain ASCII text, use the double quotation mark (") before and after the password. These are case-sensitive, and they are at least five characters long for 40-bit encrypted networks or at least 13 characters long for 128-bit encrypted networks.
Hexadecimal password
If using a password that uses only the hexadecimal range of characters, add a dollar sign ($) before the password. These passwords are at least 10 characters long for 40-bit encrypted networks or at least 26 characters long for 128-bit encrypted networks.

Can I use my airport express to extend a wireless network with a non-apple router?

I have been trying to extend my wireless network in my house. Right now I have a dsl modem/router provided by Century Link and an older AirPort express (not sure how old but it uses AirPort utility v5.6). I want to be able to share my printer and use AirTunes. Currently I have the AirPort plugged into the router and setup to create a new wireless network. I would like to combine them so I don't have to switch between to print and play music. I am not really sure where to start or if it even possible. Any info would be great!

If you keep the Express connected using Ethernet and configure the Express to "Create a wireless network" using exactly the same wireless network name, exact same wireless security and same wireless password as the Century Link network.....everything will behave as one "big" network, and you will have additional wireless coverage near the Express.
If you do not need extra wireless coverage, you can turn off the wireless on the Express.
The Express must be in Bridge Mode.
Most users know the name of their wireless network and password, so the really tricky part of doing this is that you must know exactly what type of wireless security settings the Century Link router is using....and then match up the same settings on the AirPort Express.
If the settings do not match up exactly, then you wind up with two separate networks that will each require their own log on.
If you can check the setting for wireless security on the Century Link router and provide that information to us, we can tell you how to set things up the way that you would like.

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

Can I use my AirPort express to create a wireless network in my uni room?

So, I'm going to university in september and my room has an ethernet port to connect to the internet. If I buy an AirPort express, can I plug it into the ethernet port to create a wirelss network in my room?

The quick answer is yes. However, You should check with the appropriate University authorities to make sure they will allow it (some do not) If they agree, they may offer you a tutorial as to what you need to do to enable it.
Many business people utilize the Airport Express to provide the convenience of Wi fi in their hotel rooms, if the hotel doesn't supply an in house Wi Fi system.

HT3728 How can I get my airport express to show on my network ?

I did a hard reset on my airport express and now all it does is flash amber. I have thw airport utility open but it only shows my airport extreme.

I don't know what you mean by "hard reset."
I'm a great believer in the KISS principle.
Configuration is simple if you start from a factory default condition. Then connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

I can't get my Airport express to work in client mode with my speedtouch base station?

Im trying to add my Airport Express to my exisiting wireless network - which runs from a speedtouch base station. I only want to use the AP to use air tunes but i cant seem to get it running in client mode. The interface on the Airport Utility seems different to that described in the online help here: http://support.apple.com/kb/HT1731
Everytimes i try to add it to an exisint network the AP dissapears on its restart. Any ideas if what im trying to do is possible. I've tried creating the network initially with the ethenet cable connected - which works, but then when its detatched although the AP status light stays green it disapears from from the network and i cant stream.
thanks for any help and advice.
Wilkie

In order for the AirPort Express to join another wireless network as a "client", three conditions must be met in the setup of the Express. It must be provided with......
1) The name of the wireless network that is to be joined
2) The exact type of wireless security settings that the wireless router is using
3) The wireless network password
Most users have no trouble with 1) and 3), but few know the exact type of wireless security settings that their wireless network is using. So, they accept a default setting on the Express, which does not match up with their network.
Bottom line....unless you know the exact type of wireless security settings that your wireless router is using...the Express will never join the network. The setup ends with an error message and you have to start all over again with another try....which will fail as well, etc.
If you know the exact type of security settings that the Speedtouch router is using.....we can provide you with a step by step setup guide.
If you do not know this, or are unsure....you will need to get into the setup menus for the Speedtouch router to locate the wireless settings. Or, if the wireless router was provided by your ISP, they may be able you with this information.
Post back with that info and we will proceed.

Using Airport Express to extend my wireless network

I recently purchased a Time Capsule but found that I could not see the wireless signal from my bedroom. To solve this I purchased an Airport Express to extend the range. I plugged the AE into an outlet in my bed room and set it up to join my existing network. Everything looked fine from the point of view of the Airport Utility. Unfortunately my iPod Touch still can not see my wireless network from my bedroom. I new iPad can see it but the signal is very weak, even when I hold it right next to the AE. Is there a setting I missed?

Rick, welcome to the discussion area!
I plugged the AE into an outlet in my bed room and set it up to join my existing network.
You need to configure the AirPort Express to "Extend a wireless network". The AX does not provide any additional wireless coverage when it is set to "join".
First, you need to check a setting on your Time Capsule as follows:
AirPort Utility > Manual Setup > Wireless tab (below the icons)
Make sure there is a check mark next to "Allow this network to be extended"
Update to save any changes
On the AirPort Express move it close to the Time Capsule for configuration:
AirPort Utility > Manual Setup > Wireless tab
Wireless Mode = Extend a wireless network" (Hold down the option key on your Mac if you do not see this choice appear when you click the selection box).
Wireless Network Name = Same name as your Time Capsule Network
Check mark next to "Allow wireless clients"
Security = Same setting as your Time Capsule
Password = Same password as your Time Capsule
Confirm Password
Update to save settings
The AirPort Express can only "extend" what it "receives". Most users position it too far away from the main router and consequently, the Express extends a weak signal. Try a location that is about 1/2 to 2/3 the distance between the Time Capsule and the area that needs move coverage. Then experiment a bit to find the best signal.
Post back on your results.

I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

If the AirPort Express is extending your network it is using the same wireless network name as your "main" router.
Your main router and the Express act like one "big" network now.
Your computer will connect to either the main router or the Express automatically....depending on where it sees the best signal.

Can't read the airport express configuration

hi there,
i've got an AIPORT EXPRESS (b/g) V 6.3, which has been working marvellously for 4 year, with 3 different laptop ( powerbook, macbook pro and PC).
since last week end, my connection on internet was really slow (with the ethernet cable the connection is really fast as usual).
So I've reseted it. then reconfigure it. no problem.
then this saturday my girl friend couldn't see the network on her PC.
so I've resetted it again!
since then my macbook pro see it, also my airport utility, but it can't connect to it....
airport utility says :reading the airport express configuration... and nothing !!!!
EDIT: also iTunes can't see the AE anymore...
i just don't know what to do.
thank you for your solution
(hope my english not to bad)
Message was edited by: Relaxxx
Message was edited by: Relaxxx

Hello Relaxxx. Welcome to the Apple Discussions!
Although I know you have tried several resets, please try another "factory default" reset to get the AirPort Express Base Station (AX) back to its original factory configuration so that we can administer it.
After resetting it, connect your MacBook Pro directly, using an Ethernet cable, to the Ethernet port of the AX, and then, run the AirPort Utility to configure it. Where you able to access it now?
Once configured, you can disconnect the Ethernet cable. Using the AirPort Status icon in the menu bar, verify that you are connected to the AX's wireless network. Are you now able to both find it and connect from the icon?
Once you verified that you can access the AX, both via wire and wirelessly from the Mac, try the PC.

MacBook Pro that my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

MacBook Pro that my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

Get the Airport Utility for the your iPad from the App store. You will need to know the password for the Airport Express (not the WiFi password) to access the AE. The iPad utility will, I think, do all of the actions to control your AE.
You can reset the AE back to factory default but with the iPad app you should not ned to.

Can,t get the airport express to see my wireless network

Similar Messages

Maybe you are looking for