Can't get the Audio to work

I'm putting together a piece for school but can't seem to get the imported audio to work. I purchased some songs off of iTunes and imported them into Final Cut, but there is no audio when I play the film. There aren't even any audio waves on the timeline or viewer box. Does anyone know what I can do to fix this? I need it ASAP! Thanks.

Sorry - by purchasing the music on iTunes you don't have the rights to actually use them in a video.
The DRM will keep you from doing so inside FCP.
CaptM

Similar Messages

How can I get the audio to work again?

I have no audio output (external or internal) on my computer. When I click on the speaker is is in gray. When I go to sound in network preferences and go to output it only lists digital output/built-in output and is says the selected device has no output controls. There are no other choices than this. The input sound is working but not the output on the internal speaker or through the jack. Please help.

My computer is not under warranty and it's over 4 hours to a mac store. I did the paperclip thing very lightly as I did feel uncomfortable doing this.
So what did you do or did support do to resolve your issue? I do appreciate you taking the time to try to help. Hopefully you can help me.

When I connect my Apple TV to a computer monitor there is video but no audio. How can I get the audio to work?

The headphone jack on the monitor doesn't seen to work with the Apple TV either.

Welcome to the Apple Community MPR888.
What type of connection are you using on your monitoe, if DVI, DVI doesn't carry audio, you will need to use the optical connection for audio.

HT1386 I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work.

I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work. I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
Thanks for any suggestions

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

I can't get the volume to work when I use firefox. It does work on internet explorer. What is going on?

I downloaded firefox in order to do some online training that I couldn't open in any other browser. I can't get the volume to work in this browser. I can use internet explorer and the volume works. But I can only do the training through firefox.

You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.<br />
See also:
* https://support.mozilla.org/kb/No+sound+in+Firefox
* https://support.mozilla.org/kb/Video+or+audio+does+not+play

I can't get background audio to work in garage band 1.3 ios6.1 .also no options in settings to turn it on?

I can't get background audio to work in garage band 1.3 iOS 6.1 also no option in settings to turn on or off?

I had the same problem, try this:
In your home directory, go to Library/Caches/
(make sure you are in the library in your home directory, not the library at the root level of the hard disk).
and remove this file: com.apple.audiounits.cache
You can drag it to your desktop if you like or throw it away.
Then relaunch garage band, it will rescan all audio units.
If you have the Kontakt audio unit installed in YourHardDiskName/Library/Audio/Plug-Ins/Components it should recognize it and include it in your list. You can toss that cache file any time you want Garage Band to rescan your audio units.
I had a problem with Kontakt on an upgrade that broke it, GarageBand saw it and put Kontakt on its list of broken Audio Units, it would never load it after that... after a new rescan, it was fine.
Good luck

Can't get any audio "changers" working

Hello, I have HP Pavilion 2250so, and I can't get any audio changer or like that working. I can't get Dolby Advanced Audio working and the IDT Audio which is already on my computer doesn't work, evey time I try to start that, it says -"IDT PC Audio has stopped working. I don't mean that I don't have sound in my computer, no I have but I can't get those audio programs working which are like equalizer in Windows Media Player 11 that you can add bass boost and stuff. Any help?

I would recommend that you first try updating the IDT Driver using the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112600-1&cc=us&dlc=en&lc=en...
If that doesn't seem to help, try updating your BIOS: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116222-1&cc=us&dlc=en&lc=en...
Let me know if either of those helped to resolve your issue or not. If they do not, let me know and I will see if I can find anything else to help you.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn ato downloads it defaults back to off, can anyone help?

I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?

Welcome to the Apple Community.
Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions)

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work?

In that case the procedure assuming it is a PAYG phone is to get an o2 PAYG sim, put £20 on it and then make a few calls making sure you leave £15 on the sim to pay for the unlock. Then there is an online unlock request form on the o2 site just fill this in. It takes between 1-14 days and you get a message from o2 telling you how to complete the official unlock through iTunes.
I got my o2 unlock in nov 09 so this is not just opinion.

How can i get the speakers to work properly? they have a lot of static and scratchiness from them

how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

I found my answer in this thread:
https://discussions.apple.com/message/16646999#16646999

How can i get the SSO to work successfully?

How can i get the SSO to work successfully? I followed the note for configuring infoview with ad sso using kerveros & .net.
Adding the AD group into the win ad authentication configuration page creates the user group but the members of the group aren't being pulled in when I go to the group and select / query the users tab

Bart,
By default the setting for update options on the Windows AD tab of authentication does not actually create the aliases until the user attempts to login the first time. We set it this way to prevent a huge group of alias's being created when the administrator sets up Windows AD and also so that only user aliases for users actually using the system get created. You can change this behaviour though if you like. Simply change the radio button option to 'New Aliases will be added and new users will be created' this will create the accounts for you when you hit the update button. If you have a large group your adding I would wait until and afterhours time when you have less activity as this will impact CMS performance while it creates all the accounts.

I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

See the following for how much you will have to pay for the exchange.
Apple - Support - iPod - Repair pricing

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

Can't get the Audio to work

Similar Messages

Maybe you are looking for