Can't get the "find" function to work in Bridge CS4?

Hello there,
I need a bit of help with the Find funtion in Brdige CS4. Basically it doesn't work. I've got a folder with multiple files and keywords and the search brings up "no results" regardless what I do. What could be the problem?? I'm running Windows XP.
thanks,
Geordie

In the Masked Artwork folder go to a photo with the keyword "food".   Does it have a check mark at food?
I have had situations where the photo had the keyword printed under the title, but the check mark is not present.  A search with that combination for the keyword yields "no image found".
Go to bottom of your keywords panel and look under Other Keywords.  Is Food there and checked?  If so you can right click on this keyword and Find will work.  If you have the type of situration where keyword has no check mark in your tree, except for at Other, I found you have to delete them and then re-enter them.  It will then work.
Let me know what you find discover.

Similar Messages

  • I have a MacBook, made in 2010. I can't get the eject function to work. I have a DVD in now and want to eject it and put another one in. Command-E, dragging it to the trash or Find-Eject does not work. Ideas?

    I have a MacBook, made in 2010. I can't get the eject function to work. I have a DVD in now and want to eject it and put another one in. Command-E, dragging it to the trash or Find-Eject does not work. Ideas?

    Hi there. Hear are some other options . Hold down for click on the track pad while restarting and keep it down all the way thru boot. Or use right click on a mouse. If it's stuck, sometimes sticking a business card in top edge of slot while trying the eject option can work.

  • I have tried to reindex my messages but I still can not get the search function to work in email

    I have tried reindecing my messages by rebuilding the library but I still can't get my message function to work in mail.  Any proposed solutions much appreciated.

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Back up all data.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Can't get the view function to work properly...

    For some reason, I no longer can get the VIEW function to do what I want. Specifically, everytime I try to get ARTIST to show, it shows ALBUM BY ARTIST instead. This does NOT happen in my downloaded file, only in the entire library. Anyone else have this happen to them? Please advise.

    In the Masked Artwork folder go to a photo with the keyword "food".   Does it have a check mark at food?
    I have had situations where the photo had the keyword printed under the title, but the check mark is not present.  A search with that combination for the keyword yields "no image found".
    Go to bottom of your keywords panel and look under Other Keywords.  Is Food there and checked?  If so you can right click on this keyword and Find will work.  If you have the type of situration where keyword has no check mark in your tree, except for at Other, I found you have to delete them and then re-enter them.  It will then work.
    Let me know what you find discover.

  • Please Help.  compare two excel files.  Can't get the find command to work

    Hello, I'm new to applescript.  I'm trying to write a script to compare column B of one excel file to column B of the another excel file.
    I will have to had a repeat loop to proceed down the column but I'm stuck on the find command. 
    Below is some of the code I have so far.  The applescript error message is "Microsoft Excel got an error: The object you are trying to access does not exist. It highlights the find column." 
    set patientFile to choose file with prompt "Please select the patient Excel file:"
    set patientName to name of (info for patientFile)
    tell application "Microsoft Excel"
    open patientFile
    set thepatientFile to workbook patientName
    end tell
    display dialog "Is your patient SNP data in column B of the " & " " & patientName & " " & "excel file?" buttons {"No", "Yes"} default button 2
    if the button returned of the result is "No" then
    display dialog "Please put your data in column B" buttons {"Cancel"} default button 1
    if the button returned of the result is "Cancel" then
    end if
    else
    display dialog "Is column E empty? The results of this program will be stored in column E of the" & " " & patientName & " " & "excel file." buttons {"No", "Yes"} default button 2
    if the button returned of the result is "No" then
      display dialog "Please put your data in empty column E" buttons {"Cancel"} default button 1
      if the button returned of the result is "Cancel" then
      end if
    else
      set relativeFile to choose file with prompt "Please select the relative Excel file:"
      set relativeName to name of (info for relativeFile)
      tell application "Microsoft Excel"
      open relativeFile
      set therelativeFile to workbook relativeName
      end tell
    end if
    end if
    display dialog "Is your relative SNP data in column B of the" & " " & relativeName & " " & "excel file?" buttons {"No", "Yes"} default button 2
    if the button returned of the result is "No" then
    display dialog "Please put your data in column B" buttons {"Cancel"} default button 1
    if the button returned of the result is "Cancel" then
    end if
    else
    display dialog "Does column C contain the result data you would like copied from" & " " & relativeName & " " & "excel file?" buttons {"No", "Yes"} default button 2
    if the button returned of the result is "No" then
      display dialog "Please put the data you would like copied in column C." buttons {"Cancel"} default button 1
      if the button returned of the result is "Cancel" then
      end if
    else
      tell application "Microsoft Excel"
      activate object workbook patientName
      copy value of cell "A1" to cellPatientFile
      find (range "B:B" of workbook relativeName) what cellPatientFile
      if cellPatientFile is true then
      set bold of font object of cellPatientFile to true
      end if
      end tell
    end if
    end if
    Does any one have any hints towards solving this problem?  Thank you for any help.

    Hi,
    taffners wrote:
    Thank you everyone for your help.  I attached my code.  It works now but kinda slow.  Does anyone have any hints on making it faster.
    Important : when you use the find command, it's preferable to use the properties ( look in and look at).
    Example : find searchRange what searchTerm look in values look at whole
    Otherwise, it will search according to the criteria of your last find.
    Example, if you uncheck 'Find entire cells only', and after that you run the script,
    find column 2 what 10.0 -->  match 110.0 or 1110.0 or 310.0, .... , because it look at part.
    set screen updating to false : Yes it improves the speed.
    Here are my tests (no duplicate values in the Excel column ) on old computer (Powermac G5) .
    set screen updating to false without any activate object command
    2000 rows --> 3.7 minutes,  your script : 11.5 minutes
    4000 rows --> 7.5 minutes, your script : 23 minutes
    8000 rows --> 15 minutes,  your script : 46 minutes
    But, it's faster to search through a list without using the Excel find command, no need to set the screen updating, You can continue working on the workbook or another workbook, this will not disturb the script.
    Tests on my script :
    2000 rows --> 4 seconds
    4000 rows --> 21 seconds
    8000 rows --> 1.3 minutes
    17000 rows --> 6 minutes
    Here is the script :
    main()
    display dialog "Done"
    on main()
          script o
                property patientSNP_list : {}
                property relativeSNP_list : {}
                property resultsList : {}
                property copyAnswerList : {}
                on findLookAtWhole(value) -- case sensitive
                      set {low, high} to {1, count my relativeSNP_list}
                      considering case
                            repeat while low ≠ high
                                  set mid_ to (low + high) div 2
                                  if value is in items low thru mid_ of my relativeSNP_list then
                                        set high to mid_
                                  else
                                        set low to mid_ + 1
                                  end if
                            end repeat
                      end considering
                      if (item low of my relativeSNP_list is value) then
                            set end of my resultsList to item low of my copyAnswerList
                      else
                            set end of my resultsList to {"no"}
                      end if
                end findLookAtWhole
          end script
          --opens File1.  Names it patientName
          set patientFile to choose file with prompt "Please select the patient Excel file:"
          set patientName to name of (info for patientFile)
          tell application "Microsoft Excel"
                open patientFile
                set thepatientFile to workbook patientName
                set patientSheet to sheet (name of active sheet) of thepatientFile
          end tell
          --This Dialog assigns where the data is stored for file1
          display dialog "What Column is your patient SNP data of the " & " " & patientName & " " & "excel file?" default answer "" buttons {"submit"} default button 1
          set PatientSNPCol to (text returned of the result)
          --This Dialog assigns what row your data starts at for file1
          display dialog "What row does your patient SNP data start in the " & " " & patientName & " " & "excel file?" default answer "" buttons {"submit"} default button 1
          set patientSNPRow to (text returned of the result)
          set patientStartCell to PatientSNPCol & patientSNPRow
          --This Dialog assigns the last row of data for file1
          display dialog "What row is the last row of you patient SNP data start of the " & " " & patientName & " " & "excel file?" default answer "" buttons {"submit"} default button 1
          set patientLastRow to (text returned of the result)
          set patientLastCell to PatientSNPCol & patientLastRow
          --This Dialog assigns the location of the data copied from file2
          display dialog "What column would you like the results of this program stored in of the" & " " & patientName & " " & "excel file." default answer "" buttons {"submit"} default button 1
          set resultsLocation to (text returned of the result)
          --opens File2.  Names it relativeName
          set relativeFile to choose file with prompt "Please select the relative Excel file:"
          set relativeName to name of (info for relativeFile)
          tell application "Microsoft Excel"
                open relativeFile
                set therelativeFile to workbook relativeName
                set relativeSheet to sheet (name of active sheet) of therelativeFile
          end tell
          --This dialog assigns the column of data in file2
          display dialog "What Column is your relative SNP data of the " & " " & relativeName & " " & "excel file?" default answer "" buttons {"submit"} default button 1
          set relativeSNPCol to (text returned of the result)
          --This dialog assigns the column of data begining copied to excel file1.
          display dialog "What Column contains the data you would like copied to the " & " " & patientName & " " & "excel file in column" & " " & resultsLocation & " " & "?" default answer "" buttons {"submit"} default button 1
          set copyAnswer to (text returned of the result)
          tell application "Microsoft Excel" -- get values
                set o's patientSNP_list to value of range (PatientSNPCol & patientSNPRow & ":" & PatientSNPCol & patientLastRow) of patientSheet
                set lastrow to first row index of (last cell of used range of relativeSheet)
                set o's relativeSNP_list to value of range (relativeSNPCol & "1:" & relativeSNPCol & lastrow) of relativeSheet
                set o's copyAnswerList to value of range (copyAnswer & "1:" & copyAnswer & lastrow) of relativeSheet
          end tell
          set tc to (count o's relativeSNP_list)
          repeat with i from 1 to tc --convert list of lists to one list
                set item i of o's relativeSNP_list to item 1 of item i of o's relativeSNP_list
          end repeat
          set tc to (count o's patientSNP_list)
          repeat with i from 1 to tc -- AppleScript find method, not the Excel Find
                o's findLookAtWhole(item 1 of (item i of o's patientSNP_list))
          end repeat
          tell application "Microsoft Excel" -- set values
                set value of range (resultsLocation & patientSNPRow & ":" & resultsLocation & patientLastRow) of patientSheet to o's resultsList
          end tell
    end main
    If you have lots of rows and you want it to go faster.
    I have another script that uses the power of (/usr/bin/awk and his associative arrays) in a do shell script
    17000 rows --> awk : 2 seconds, applescript : 6 seconds, total : 8 seconds
    34000 rows --> awk : 3 seconds, applescript : 11 seconds, total : 14 seconds

  • HT2845 how can I get the scroll function to work on my magic mouse?

    I got my magic mouse to work perfectly with my macs but I also have a work computer which is a windows vista lenovo.  All functions work with the mouse on my pc but the scroll function when I'm in excel which is a big deal for me because I am an accountant.
    tks.

    Use the Image Capture application. It is already installed on your computer.
    See:
    Mac Basics: Using a scanner
    http://support.apple.com/kb/ht4505
    I hope you get this issue sorted out.
    Austin

  • I can't get the autofill function to work

    When filling out a form, the auto fill function points to my wife (who owns the icloud).
    How can I get it to point to my data?

    Select your card in Contacts. Then select
    Card ▹ Make This My Card
    from the menu bar.
    In Safari, select
    Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card.

  • Answer: to How can I get the reset button to work.

    How can I get the reset button to work?: Answer
    Thanks to everyone who helped on this. You are awesome. Especially Ned!!  Posted here because I was unable to add more to the existing post.
    Here is the question:
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
    ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
        at flash.display::DisplayObjectContainer/removeChild()
        at AddATree2/onReset()
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
      Here is the answer:
    //when you click the reset button everything is removed from the stage
        //except the star, baclground, and reset button (trees and greeting REMOVED)
        public function onClear(Event:MouseEvent):void
                if (tree3) removeChild(tree3);
                if (tree2) removeChild(tree2);
                if (webText) removeChild(webText);
                if (tree) removeChild(tree);
                clickCount = 0;

    This is the answer to what to put in the onclear function.

  • On Apple TV, my pictures have loaded, but I cannot get the slideshow function to work.  It has been "loading" 28 pictures for over 5 minutes.  What is wrong?

    On Apple TV, my pictures have loaded, but I cannot get the slideshow function to work.  It has been "loading" 28 pictures for five minutes.  What am I doing wrong?  I have Windows 7 on my PC.

    I don't have any direct experience with D-Link equipment, but I may be able to provide some general advice. See if you can use a Web browser to connect to the D-Link's configuration screen. This probably involves visiting a URL such as http://www.192.168.0.1 . If you haven't changed the sign-on parameters, a quick Google search should find them for you.
    Once there, note as many configuration details as you can find. You'll need those to configure your Time Capsule.
    Use the AirPort Utility to configure the Time Capsule.
    One last thing: It's quite possible that the Verizon network will have locked onto the "MAC" address of your D-Link router. Something needs to be done to reset this. If there's a separate box at your house that came with the FIOS equipment that's "upstream" from the D-Link router, I'd cycle power on it to see if that does the job. Otherwise you'll probably need to call Verizon to ask them to reset things once your Time Capsule is installed in place of the D-Link router.

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • After I exported a PDF to a Word doc and downloaded it, I can't get the pointer tool to work.

    After I exported a PDF to a Word doc and downloaded it, I can't get the pointer tool to work. When I click on the document text, the only tool is the "move" tool. I can't edit or select text. Please advise.

    Version of Adobe: Adobe ExportPDF (not Pro)
    Operating system:  Windows 8.1
    Steps I am taking: When the PDF file is selected and opened, I clicked on Tools menu on right side of the screen; then I clicked on Select PDF file; then under Convert To, I selected Microsoft Word (*.docx); then I hit the box below that; and clicked Convert. I then see the message that says it is Converting to Export PDF Online. Then I see a link below that, that says Download Converted File. This takes me online to Adobe Acrobat .com, where, I see the command, Export PDF, and see a blue box on the same screen that says Select PDF Files to Export. I click on the thumbnail of the file I want to export. This brings up, online, a screen containing the file I wanted to convert to Word. Then, on the same screen, I click on the icon on the right hand of the screen that says Download. then I click on the box on the bottom the screen that contains the Word document I had wanted to convert. This brings up the Word doc. in Compatibility Mode the latest Word version, which I am unfamiliar with and which has a Picture Tools tab that I cannot escape from and I cannot get any selection tool other that the Move pointer, and I cannot find the Select text pointer to select any text on the page. I don't want this Word version and do not know how to return to the old version of Word that I am familiar with.
    Can you help me, please?
    Theresa Julia Schuer

  • How can I get the readability bookmarklet to work

    Firefox 3.6.8 in Windows XP Home on a Toshiba netbook. How can I get the "readability" bookmarklet to work? It works just fine in Camino on an Apple mini desktop computer running OS X 10.4.11 (Tiger.) Readability uses javascript, which I do have turned on. The problem (of it not working) doesn't seem to have anything to do with the NoScript add-on either, as I tried allowing everything on the page and it still didn't work. Any ideas of what to try next?
    ''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746624 here]''

    Hi there.
    By chance, I too have the readability bookmarklet installed (but I don't use it that much, to be honest), and it works ok for me. It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • PSE9 Can't get the blur tool to work..

    I have a problem with PS elements 9.
    Basically .. In my last package I liked to use the manual blur tool, I see elements has one (a teardrop shaped tool from the bottom left)
    I have selected that blur tool and selected blur at 100% and it pretty much does nothing.
    The other two tools, sharpen and smudge work as expected I just can't get the blur tool to work.
    I want to be able to drag the blur tool across a part of the image and blur it.. but it does nothing!
    If I look at the pixel level then at 100% blur the tool is very slightly blurring the image but only very slightly, I want to be able to paint blurryness across parts of an image and it is not letting me.
    Am I doing something wrong?

    Oh, that is a pain.
    I am used to using a manual blur tool and I like it.
    I can see that the select then filter blur does blur a lot more (as much as I would like) but I don't like the way the selection tool works it always seems to end up with blurs that look unnatural at the edges...
    I suppose I will have to find a way of using it or buy another package.
    Very dissapointed.

  • Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hi deamayfield,
    Thanks for visiting Apple Support Communities.
    If your Music app is unresponsive, try restarting/resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Best,
    Jeremy

  • How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

    How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

    Welcome to the Apple Community.
    Unfortunately the Apple TV doesn't have a web browser so you can't do that.

Maybe you are looking for