Can't get the iMic to work with Garageband

Just got an iMic. It registers in the sound input control panel, but I get nothing in Garageband. I changed the pref in GB to use the iMic as input source, but still nothing.
Advise please.

Thanks for your help. Here is what I was working on. Gimme your opinion.
http://superiorsurfclub.com/Songs/Hall_Monitor.mp3

Similar Messages

  • HT4623 iPad 3 how can l gets the SIM card works With iPad 3

    As all we know its christmas time l just received the gift for iPad 3 & l notice that it need SIM card for me to use as the phone & data,how can l gets the SIM card works With iPad 3

    Remember am in South Africa & we got few carrier nets am in MTN provide & I c my sim looks so big to fit on my iPad

  • Can't get the software to work with Audigy 2

    Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
    I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
    I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
    DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
    This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
    Thanks in advance. dentore

    Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
    For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
    CAT I hope you fix your sound card. Good luck.

  • Newbie: How can I get the camera to work with skype on macbook air

    Sorry that I'm a beginner at this.  I just can't find the answer to it, but I'm sure it's common question.  Since the macbook air has a camera built in, how come it isn't showing up on my new skype account?

    Go into an Apple Store if under a year old from purchase. They can assist you
    Or check out the issue at the Apple Support Community
    http://www.apple.com
    Good Luck

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • Is there an adapter can i get so square will work with the otterbox i have on my iphone

    Is there an adapter can i get so square will work with the otterbox i have on my iphone, I love the otterbox and want to keep it on all the time. not only does it protect my iphone it, it makes it easy for me to hold because I have trouble with my hands. please help

    That's a good question. The main problem with the Square readers is that the plug is designed to send data to devices, rendering most headphone extension cables useless.
    Reading another forum I saw this: http://www.amazon.com/gp/product/B001BN7XSM
    Give that a try. Claims to work perfectly for Square. NOT headphones.

  • Why can't I get the average function work with empty cells?

    Why can't I get the average function work with empty cells?

    The thing that I am having a problem with is that I made a different form that calculates the average no matter how may of the cells have numbers or not and I didn't use an if function.  I have tried with this other form and and it calulates as if all the cells where being used.  I am using the [*] in both instances but it only works in the one I did earlier.

  • I can't get the volume to work on my ipod. works only with the headset in. Thanks

    Hello I can't get the volume to work on my ipod touch. Only works witht the headset. Thanks

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • Can't get out.print to work with XML jsp tags

    <jsp:scriptlet>
    if(ErrorTrap == true) {
         out.println("<tr><td colspan=\"center\" align=\"center\">There was" an error while processing the form</td></tr>");
         ErrorTrap = false;
    </jsp:scriptlet>
    I can't get this script to work with the XML stype jsp tags. It keeps telling me the <jsp> tags are untermintaed. Is there a special trick to fix this or do I have to use the non-XML type tags?

    Sorry, I didn't mean to put the extra " in the out.println text string. :-/

  • Can't get Palm Zire to work with windows 7

    Can't get palm zire to work with windows
    Post relates to: Palm Pilot

    Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista.  It's all there. 
    After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it

    When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?

    The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • How can I get avi files to work with imovie08?

    Hi I bought a macbook last year and have loved creating imovie videos by simply using the video function on my digital camera. My daughter was born last year and we have a great collection of clips of her first 7 months. I'd now like to take things a step further and put together a wedding video.
    We had our wedding day filmed on a digital camcorder by a friend and he has given my 25MB of avi files which I would like to import into imovie and make into a video however I understand that this format isn't compatible. Is there a way of getting it to work and if so please can you tell me in very simple terms what I need to do to get the files to work with imovie? (I'm not very technical)
    Thanks
    Matt

    I do not know of a way to import .avi files directly into iMovie, and I am positive that this is not actually possible as iMovie only supports the importation of .mov, .mp4 (mpeg4) and .dv filetypes.
    What you could do is use a video converter (there are some good ones that are availible free, eg MPEG Streamclip (http://www.apple.com/downloads/macosx/video/mpegstreamclip.html)) to convert those avi movie files to either of the 3 video formats iMovie supports, then import them.
    MPEG Streamclip does sound a little complicated for you but it is the best I have found, any more questions just post them here.

  • How can I get elements 11 to work with 16 bits photos?

    In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

    No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
    Either way is expensive compared to photoshop elements.
    http://www.adobe.com/products/cs6.html?promoid=JOLIS

  • How can i get ical invitations to work with outlook users?

    how can i get ical invitations to work with outlook users?
    I can send ical meeting invitations but outlook users are having problems having the meeting show up in their calendar….

    My Epson is able to do scans using Image Capture without any problems at all.
    Allan

Maybe you are looking for