Can't get to home network behind WRV54G using QuickVPN

Someone please help preserve my sanity. I have a home LAN with multiple wired and wireless W2K computers on a WRV54G. I have the QuickVPN client on my W2K laptop. I have a static WAN address.
I can remotely connect to the WRV54G using QuickVPN with no problems at all. The connection seems to be able to stay up indefinately and I can remotely administer the WRV54G and access all functionality. I can even ping all of the computers on my LAN from the remote connection with great response times.
What I cannot do is "see" any of the computers on the LAN from the remote connection. I cannot map to any of the shared drives on the LAN either using machine names or IP addresses. I have repeatedly attempted to try different settings on the router's VPN setup and I have created user accouonts on the LAN machines for my remote login name and password. Still no joy. This is driving me nuts.
Any help will be greatly appreciated.

Brickmonkey,
I'm afraid I don't know how to find the answer you are referring to. I tride th url you referenced, but linksys says it doesn't exist. Sorry if I'm a little slow .....

Similar Messages

How can I set a home network behind a wireless linksys router

The XP wizard for 'setup a home or small office network' doesn't seem to work when I'm behind the router (it used to work before I had a router - back then I worked with a product called 'access point' which was connected to a second network card on my desktop).
My layout is normal, I think. Here are the links:
modem -- ADSL
modem -- router
desktop -- router
laptop -- router (through wireless).
I have internet on both computers. The only thing I cannot do is make one computer find the other.
Anyone knows what should I do ?
Thanks,
Ofer

ofers wrote:
The XP wizard for 'setup a home or small office network' doesn't seem to work when I'm behind the router (it used to work before I had a router - back then I worked with a product called 'access point' which was connected to a second network card on my desktop).
My layout is normal, I think. Here are the links:
modem -- ADSL
modem -- router
desktop -- router
laptop -- router (through wireless).
I have internet on both computers. The only thing I cannot do is make one computer find the other.
Anyone knows what should I do ?
Thanks,
Ofer
Make sure both computers have File and Printer Sharing enabled. Also make sure both computers have the same workgroup name. Temporarily disable any software firewalls, such as Norton or McAfee, and see if the computers can see each other.
A+ Certified, over 15 years of hands on computer and home networking experience...and I still get lost!

Macbook: I can't see my home network....

I am using a Macbook as detailed in my profile. Yesterday, upon getting home from work I booted up my Macbook to find out I couldn't get on the net.
Upon further investigation I found that the Macbook could not see my home network, despite me using it the previous evening. It can see all the other local networks that it usually can, as well as the mobile modem that I am using to type this now.
All other computers on the network can see it, and looking on the network configuration screen it can see my Macbook. But I can't see it
The router is a Belkin one

Tried that yesterday - still no joy

Cannot get a home network functioning with new bth...

As a relatively new BT infinity customer I simply cannot get a home network up and running...
I have one PC which is hard-wired into the router and two laptops, all running windows 7. I have discovered from this forum that BThomehubs don't like Windows own homegroup utility so I need to ensure that all devices are on the same workgroup. OK, done.
Every sharing option is checked and even my printer properties are slected to share all. The printer is wired via USB into the main PC. I can 'see' my laptops from the PC and vice versa through windoes explorer but can only access the laptops from the PC, not the other way around which is a pain for transferring files (one of the key reasons for haveing the network in the first place!)
My printer is an Epson all in one PX650 which worked quite happily when I was a Sky Boradband customer from all devices. Now I can't even see it or seemingly add it to the network... in fact I'm not even sure I have a network in the truest sense. This is too hard BT when your competitors made it so simple.
Any thoughts will be much appreciated...

mtsue wrote:
but I cannot get a home page on the iPad.
Not sure what you mean by that. If you mean set a Starting page for Safari, then you can't. Safari will open up on the last page you browsed. If you close all tabs before exiting, it will jsut open to the gray screen. From there you can search using the google search at the top left of the address bar, or simply enter an address in the address bar.
mtsue wrote:
I also cannot get my serial number to contact support.
This can be easily obtained by flipping the iPad over and looking at the fine text at the bottom of the backside.
The Serial number is printed there.
Alternatively going into Settings->Geneal->About will have the serial number in the list of things about the iPad.
If you are finding it difficult to navigate around the iPad, perhaps setting up an appointment at the Genius Bar of your local Apple Store may be usefull. As they have Usage classes you can take.

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.

Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can I create a home network withous dsl connection with airport express

can I create a home network without dsl connection with airport express?
So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network.

Can't find my home network

Greetings,
I have tried searching this forum and the Apple support pages, and can't find a solution. My new iPod Touch can't find my home network. I have an AirPort Extreme base station and am using WPA/WPA2 Personal security. My MacBook Pro has no problem finding my network, and works flawlessly. My iPod Touch, on the other hand, can not. Even though my home network is not a closed network, I still tried entering the network name and password manually, and it still doesn't see it. I tried turning security off completely in my Base Station>AirPort>Wireless settings, and that didn't help, either. My iPod Touch does see one or two other networks in my neighborhood, but not mine.
For the record, I am sitting less than two feet away from my AirPort Extreme base station, so I'm definitely within range, my iPod Touch can see other networks, so it would seem that it's antenna is not at fault, and my MacBook Pro sees and connects to my network without any problems, so it would seem my AirPort Extreme is set up properly. So what am I doing wrong?
Any thoughts?

Thanks Scott, that did it. Within range of everything is a wireless security camera that was creating an interference issue with my MacBook Pro and AirPort Extreme, and the only solution, other than disabling the camera, was to switch from 2.4 GHz to 5.0 GHz under Base Station>AirPort>Wireless>Radio Mode, which eliminated b/g compatible. At the time, that was fine because my MacBook Pro was n compatible. I see now that my iPod Touch is not. I tried switching back to b/g compatible, and the iPod Touch found my network right away, but the MacBook Pro lost it.
Can't win for losing.
The security camera has now been disabled, and both the iPod Touch and the MacBook Pro can access my network. I just won't be able to film the guy who tries to steal them.

AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

I had a bright house cable modem that also had built-in wi-fi.
Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
That would be correct. Hopefully, they offer this type of option for their customers.

Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

Iphone osi 8.0 upgraded. Now I can't find my home network. Help!

Just upgraded my iPhone to psi 8.0. Am able to find and stay connected to public wifi. Originally was able to find my home wifi. Now I'm not connected nor can I find my home network. I have tried reset via the phone, reboot of phone and reboot of router.

Thanks 11142007. I had actually tried what you suggested. But, it was only after I rebooted the router a second time that I was able to connect and, hopefully, stay connected. The key on the second router reboot was waiting at least 15 seconds to power it back up. I didn't do that the first time.

How can friends get on my network????

I have an airport extreme base station set up with a 128 bit WEP password. All of the computers in my house (all mac) are able to connect to the network with no problems, as well as connect to the shared printer that's hooked to the airport. But when friends come over to my house with their windows laptop, they can not get on my network. What do I need to do? I reset my network password, so I know I am giving them the correct password to enter. One friend's laptop asks for the WEP key, not the password.
Help - I'm feeling quite ignorant here. Is there something that I need to do on my end to allow them to access the network? I am out of ideas, and have not been successful.

In mucking about since I posted this question, I found essentially the same info. Still didn't work. Not sure why, though - it looked like entering the WEP key (ie, equivalent network password) was all it would take - but the laptop still wouldn't connect.

Can i get a social networking plan with an iphone?

i have the choice to get a new phone, iphone or blackberry. but i want twitter and facebook when i am not in a wifi area.
can i get a social networking plan like i canw ith a blackberry?

I live in New Zealand, so don't know.... but
Data plans (and a social networking plan is essentially a data plan limited to a few services) are run by phone networks, not handset manufacturers.
So there is no reason that there would not be a data plan, or social network plan that could be available.
My phone company gives free data to facebook, so it may be possible.
You shoudl contact the phone company who sells the iPhone.
Or buy an unlocked iPhone (not sure if you can in Canada, here we can), and then choose a phone company seperatly.
This is what I did.

How can I get my home button to work again

How can I get my home button to work again

Well, if your Home button is broken, you won't be able to reset your phone, and if the Sleep/Wake button won't turn your phone on, it's a trip to the Apple store.

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

Return, cancel, or exchange an Adobe order

Can you get an Apple ID for corporate use to associate with more than 10 devices?

Can you get an Apple ID for corporate use to associate with more than 10 devices?

I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
Regards.

Can't get to home network behind WRV54G using QuickVPN

Similar Messages

Maybe you are looking for