Can't get volume! Can anyone help?

For some reason I can't get any volume even though the volume is up to the highest. Does anyone have any suggestions to fix this? Thanks in advance for anyone's help?

I suggest that something with the speaker dock is what corrupted things. What have you done to try and correct this? The user troubleshooting procedures are first to power the iPhone off/on. Do this by holding the sleep/wake button until the red slider appears and slide to power off. After that turn the iPhone back on and see if that helps. If that does not work, then the next step is a reset. This is accomplished by holding the sleep/wake and home buttons together until you see the Apple logo and then release. After the iPhone restarts, see if that helps. If not, the next step is a restore, first from a backup and if that doesn't help, then as a new device. If none of this corrects the problem, then a trip to the Genius Bar is in order. Good luck.

Similar Messages

Can anyone help please with my Time Machine, I have been getting the following message The backup disk image "/Volumes/Mac Backup/Stephen Smith's iMac.sparsebundle" is already in use.

Can anyone help please with my Time Machine, I have been getting the following message The backup disk image “/Volumes/Mac Backup/Stephen Smith’s iMac.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Can anyone help me find out if its a hardware problem???

I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Its a 1year old phone n the version is 4.3.2(8H7). Also the volume sign does not go off from the screen. Can anyone help me find out if its a hardware problem???

Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
You can always contact Apple and setup service through Express Lane.

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I had my iphone 3gs unlocked so i could use it in Oz, however although i can phone works ok, i cant get internet, but i the option of Cellular Data Network does not appear with the new sim? Can anyone help pls?

Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc. I have done searches and got the info details from the sim provider to activate, but instructions say i go to : Settings; General; Network and then Celluar Data Network, but I dont get that option ? When i put back my O2 sim card, the option reappears?
Can anyone help me please? Off to Australia again soon and really could do with it working properly this time.
Thanks everyone
Ronnie

Hi Ronnie, was wondering what brand sim card you bought?
Was it from Telstra, Optus, Vodafone, Virgin or Mayasim?
I have a 4 S running iOS 5.01 is there an option in Settings - Network - Carrier? As this should be set to the supplier of the sim card. In my Settings - Network there is no option for Celluar Data Network.
What version of the iOS are you using?
Some prepaid sim cards may not have a lot of data, so I suggest searching the companies websites for the best deals before you come here. Telstra usually have good plans. If you take your phone to the shop you purchased the sim card from they will usually set it up for you.
Telstra runs on a different frequency to others and offers the best coverage in Australia.
Just for the record I am not an employee of any mobile company.

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

I gifted a ringtone to my sister that I purchased from the iTunes store, and it is on her phone, but we can't figure out how to get it moved to her ringtones. Can anyone help?

I gifted a ringtone to my sister that I purchased from the iTunes store, and it is on her phone, but we can't figure out how to get it moved to her ringtones. Can anyone help?

Edit > Preferences. Select the check box for Ringtones, this will add them to the listing in iTunes.
Not sure that really answers your question though.

I know I've heard that iPads/iPhones can't get viruses but is it possible that they can? While using my iPad, it keeps going in and out of apps. On Facebook, status and profiles keep getting clicked and it keeps zooming in and out. Can anyone help

I Have an iPad mini, iOS 8.1. When I'm on my iPad, it keeps going in and out of random apps. Going to settings is the worse. As soon as I click settings and it opens,it starts clicking different things and tries turning on and off settings! In Facebook, profiles and status get clicked. The screen zooms in and out multiple times. It reminds me of when you call the help desk for a computer or a computer at work and they gain access and move around clicking and you're doing nothing. Basically things are being clicked and I'm not doing it.....can anyone help?

At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
Here are the links, and the last one pertains to the reset to factory default condition ...
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

HT1414 I have had to restore my ipad to factory settings and then tried to restore the data from the backup on itunes, but none of my apps have restored - please can anyone help as my daughter is going to go mad if I can't get her games back to where they

I have had to restore my ipad to factory settings, having made a backup on my pc first. When Ihave tried to restore from my pc I have no apps!! Please can anyone help me get them back with all their data. I don't have wifi at home and I have never been able to sync my pc with my ipad, although it works with my iphone! I copied all of the apps before I restored using itunes, but no idea where they are copied to. Any help would be hugely appreciated to get my daughters games back. Thank you in advance )

Hi Skydiver119
Thank you so much for taking the time to reply to my problem.
Yes the purchases were made though my apple id.
I have looked at a few other questions on this topic and I have read that the app data is stored in the backup file but the apps themselves need to be synced back onto the ipad. Someome has mentioned right clicking on sync my ipad but I don't know where to find that to right click on!! Lol.
Again, I really appreciate your time and if by any chance you know where I can 'right click' I would really appreciate you letting me know as I can't get my ipad to sync with my pc at all, although it is being picked up in itunes and it has backed up to itunes okay. GGrrr. Maybe I have something wrong in the settings which is not making them compatible?

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
* http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
*http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache

Can't get volume! Can anyone help?

Similar Messages

Maybe you are looking for