Can't get vpn to work on ML Server

I have tried everything possible and added all the ports on my firewall but I still get the message:
The server is unreachable. Try reconnecting. If the problem continues, verify your settings and contact your Administrator.
So I don't know what has been wrong with my setup.
I would really appreciate it if some one could help me.
Thanks

I hope you are using NWDS !!
Before you create the WAR, go to your WEB project --> right-click -->Properties --> Java BuldPath -->under Libraries --> Click External Jar --> Browse for com.sap.mw.jco directory in your IDE plugins --> Add it ..
Thanks
Jack
<b>Allot points if my post helps !!!</b>

Similar Messages

  • Can't get VPN to work on RV220W

    I am a home office user who bought a RV220W router for the speed advertised on smallnetbuilder.  I am trying to set up the VPN but can't get it to work with the Quick VPN client.  I am using dyndns to manage the dynamic IP and have entered that into the setup noted below.  I can access the router remotely (remote administration) when enabled using the dyndns address so I know that is working.
    IKE Policy Table
    General
    Policy Name:                 krafty001vpn    
    Direction / Type             Responder    
    Exchange Mode:           Aggresive    
    Enable XAUTH Client:    None    
    Local Identification
    Identifier Type:               FQDN    
    FQDN:                          krafty001.dyndns.org    
    Peer IKE Identification
    Identifier Type:               Remote Wan IP    
    FQDN:                          krafty001.dyndns.org    
    IKE SA Parameters
    Encryption Algorithm:     3DES    
    Authentication Algorithm:          SHA-1    
    Authentication Method:          Pre-Shared Key    
    Pre-Shared Key:          xxxxxxxxx    
    Diffie-Hellman (DH) Group:          Group 2 (1024bit )    
    SA-Lifetime:          28800 Seconds
    VPN Policy Table
    Add / Edit VPN Policy Configuration
    Policy Name:
    krafty001vpn
    Policy Type:
    Auto Policy
    Remote Endpoint:
    FQDN
    krafty001.dyndns.org
    NETBIOS:
    Enable
    Local Traffic Selection
    Local IP:
    ANY
    Start Address:
    End Address:
    Subnet Mask:
    Remote Traffic Selection
    Remote IP:
    ANY
    Start Address:
    End Address:
    Subnet Mask:
    Split DNS
    Split DNS:
    Enable
    Domain Name Server 1:
    Domain Name Server 2:
    (Optional)
    Domain Name 1:
    Domain Name 2:
    (Optional)
    Manual Policy Parameters
    SPI-Incoming:
    SPI-Outgoing:
    Encryption Algorithm:
                                 3DES                             None                             DES                             AES-128                             AES-192                             AES-256                             AES-CCM                             AES-GCM                            
    Key-In:
    Key-Out:
    Integrity Algorithm:
                                 SHA-1                             SHA2-256                             SHA2-384                             SHA2-512                             MD5                            
    Key-In:
    Key-Out:
    Auto Policy Parameters
    SA-Lifetime:
    3600
                                 Seconds                             KBytes                            
    Encryption Algorithm:
                                 3DES                             None                             DES                             AES-128                             AES-192                             AES-256                             AES-CCM                             AES-GCM                                                       
    Integrity Algorithm:
                                 SHA-1                             SHA2-256                             SHA2-384                             SHA2-512                             MD5                            
    PFS Key Group:
    Enable
                                 DH-Group 1 (768 bit)                             DH-Group 2 (1024 bit)                             DH-Group 5 (1536 bit)                            
    Select IKE Policy:
                                                              krafty001vpn                                                                                     
    Quick VPN Setip
    User Profile: homevpn
    User Name krafty001vpn
    Password: xxxxx
    Server Address:  krafty001.dyndns.org
    Port for QuickVPN:   Auto
    Any help in identifying what setup component I have configured incorrectly would be appreciated
    Thanks

    I am not sure this will help but make sure the following is set correctly:
    Currently VPN is somewhat broken on all versions of firmware of the RV220W including beta where VPN will ONLY negotiate on 443. If you are port forwarding 443 to a server or something else it will fail. You must allow the VPN to authenticate on 443. The router SHOULD be able to connect on 60443 as indicated on the QUICKVPN software however it doesn't this has been confirmed by a CISCO engineeer I have been speaking with regarding my VPN woes. Currently there is NO ETA on this fix.
    But since you didn't mention if your 443 ports were being routed elsewhere I figured i would lay out that information here incase you where. Also I strongly recommend contacting Cisco Support for the beta firmware it makes the RV220W much better.
    Also the reason for the update to the beta firmware it resolves the hair pinning problem which could also lead to VPN issues.

  • How can I get vpn to work at my school if its being blocked?

    I set up a VPN server on mavericks server. PPTP works fine everywhere accept at my schools network. I assume they have the ports needed closed. How do I find the open ports and tell VPN to use those ports? Im using an iphone to connect to the VPN server.

    I use cellular date but if I get VPN working at my school I can lower my data usage by 80% and therefore save money by getting a cheaper cell plan. I have 6GB plan right now and I use it all.

  • Can't Get JCO to work on my server

    hey guys,
    I'm trying to make the JCO work on my 6.40 J2E server.
    I started with a very simple jsp, but i get an error can anyone help me ?
    here is  the code :
    <%@ page language="java" contentType="text/xml"
    import="com.sap.mw.jco.JCO"     
    %><%
    JCO.Client client = null;
    %>
    here are the errors :
    Details: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/J2E/JC01/j2ee/cluster/server0/apps/sap.com/test/servlet_jsp/Z10/work/jsp_test1152090689611.java:22: package com.sap.mw.jco does not exist
    import com.sap.mw.jco.JCO;
                          ^
    D:/usr/sap/J2E/JC01/j2ee/cluster/server0/apps/sap.com/test/servlet_jsp/Z10/work/jsp_test1152090689611.java:39: package JCO does not exist
    JCO.Client client = null;
    Thx to anyone who could help me
    good day
    Quentin

    I hope you are using NWDS !!
    Before you create the WAR, go to your WEB project --> right-click -->Properties --> Java BuldPath -->under Libraries --> Click External Jar --> Browse for com.sap.mw.jco directory in your IDE plugins --> Add it ..
    Thanks
    Jack
    <b>Allot points if my post helps !!!</b>

  • Cannot get VPN to work on 10.6

    let me start by saying that whilst I have a computer background, and I can follow a simple set of "technical" instructions I am not hugely computer savvy when it comes to networking issues..
    I have successfully used a connection to a VPN service, using the operating system provided VPN connection mechanism, on three macbooks in the house, which are running leopard. I recently bought a nice shiny new macbook pro, with snow leopard installed on it. I migrated from my old macbook and my VPN connection worked. It didn't work perfectly as it had the timeout issue I have seen reported in other discussions, but it connected and did what I needed it to.
    However it was a subscription VPN service which expired. So I bought another chunk (as I have done twice before), but the new set up refuses to work on the snow leopard machine.
    Using the new user and server settings on one of the other macbooks in the house works perfectly so its not a problem with the information I was sent (as I originally thought). But I can't use it on my machine.
    I have had a look at a number of the discussions on the web, and have changed the order of the services in network preferences. I have looked for the internet sharing option to see if was enabled - it wasn't. I double checked for a nat.plist, but don't have it... My VPN service provider suggested I press apply after every new field entered in the VPM network set up box. Made no difference.
    It just doesn't work! I am completely stuck. I just want to be able to use the software as provided. I don't want to have to run background tasks, write bits of code, fiddle around on the terminal application with -sudo commands.
    Why doesn't it work ?
    Can anyone help me ?
    Message was edited by: techy-layman

    I found another thread on this forum which suggested that putting one's settings in under the "default" config didn't work but a custom named one did, so I tried setting up another config, as well as pressing APPLY after EVERY field entry and viola I can now get it to work..
    Rather strange. There are definitely bugs and glitches that Apple need to iron out, but post this solution in case it can help someone else struggling..
    I imagine I will still have the odd timeout after 50-60 minutes bug that has been reported elsewhere..

  • Can't get Cisco to work on my Mac?

    I can not get Cisco to work on my Mac OSX 10.9.4
    I found this link on someone else's post about this same issue
    https://mega.co.nz/#!tlghxQoZ!I0VV1Th9pgiFMQagfG7LbHLvT8xT5uyKo8CrPAX5f9U
    Several people said that it worked for them but the last is in 2013 so I'm not sure if its older Mac OS systems
    I can down load and install fine but when I go to open it I get this error message
    ERROR! cannot write to Info.plist, there are permission problems, or you are on a read-only volume.
    This cannot run from within a read-only dmg file.
    But when I go to "get info" the program says i have "read and write" permission?
    I'm lost and new to Mac, can someone help me please?

    The Cisco VPN client is notoriously lousy. Use the built-in Cisco client if at all possible.

  • Have entrourage and want to use Mail. Can't get it to work.

    I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
    I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage. 
    I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
    I am on Charter.net at my office and sbcglobal.net at home.
    How can i get this to work.  I can receive on Mail, but i can't send.

    check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption.  Verify the setting from your old machine setup.

  • Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

  • HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

    I have a new apple dvd drive, I was told it will work with my imac,  but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

    If it is this drive, note that it is for MBA's and Mini's only:
    http://store.apple.com/us/product/MC684ZM/A
    Ciao.

  • Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Hi,
    Is there an iPhone involved ?
    If not, what happens  if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
    What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
    Is the Apple ID linked to an iCloud account ?
    In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
    9:14 pm      Friday; April 11, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong?

    I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.

    Hello,
    You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
    http://support.apple.com/kb/HT1619
    If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
    Best of luck

  • I have a go daddy email account and I can't get it to work on my iPad

    I have a go daddy email account and I can't get it to work on my iPad

    Try turning the email account off and then turn it on again. Settings>Mail, Contacts, Calendars>select your gmail account>Off. Go to the mail app and then come back to the account in the settings and turn it on again.
    If you can't find any other way for the iPad to accept the password, delete the email account and then add it back onto the iPad.

  • I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161.  Any ideas?

    I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161.  Any ideas?

    The latest Apple driver support begins with the MP 171.
    Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
    Hopefully, this will solve your device issues.

  • My iPhone 5 went black. I tried pushing the on/off button and the circle button at the same time.  It worked once and then it happened again and I can't get it to work.

    Iphone 5 went black.  Tried pushing on/off and circle at the same time.  Worked yesterday and then did it again today.  Can't get it to work.

    You need to hold those button longer until you see the apple logo, then release, then wait for the phone to boot back up.

  • I just got a new computer with Windows 7 and all my songs were transferred to my new computer along with itunes.  But I can't get it to work.  I also tried downloading Quicktime and couldn't get it to download.

    I just bought a new computer and had files transferred along with itunes to the new computer.  I can't get it to work.  It doesn't recognize the extensions for itunes.  I also tried downloading Quicktime and couldn't get it to download.

    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for