Can't get Web Cam to work A665-S6095 Laptop

Can anyone help?
I see that it is installed still on my computerwhen I go to the programs/uninstall. There isn't a fix option.
The toshiba side bar is not working either...not sure if that matters.
I'm getting a bit frustrated.
Also new to the forum.
Thanks,

You may want to check this article.
How can I fix my webcam?
- Peter

Similar Messages

Can't get web cam to work with Yahoo messenger

I can't get my web cam to work with my Yahoo messenger but it opens up with the Cam assistant thats all it will do.
Can someone help me with this problem and get it working with Yahoo messenger?

Hello
Before you start MSN disable Camera Assistant Software. When MSN starts try please to check cam functionality under Audio and Video Setup. On step 3 you will have Webcam Setup.
Please select there Chicony USB 2.0 Camera.
The camera should start and in test window you should have picture.
Can you use it now?

Can not get my cam to work on skype

I can not get my cam to work when using skype - any ideas? cam is working when in photo booth....

Then you have a problem with Skype. Check their forums for input.

Satellite A210-11P - can't get the Camera to work

Hey
i have the Satellite A210-11P and i just can't get the Camera to work on it,
it will yurn on for two seconds and then shut itself off and 'No Preview' Appears.
Any help on this would be greatly appreciated.
Kris

Hi,
Have you tried you to reinstall/update it? Download camera assistant from [Toshiba driver page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Remove the previous one and restart the laptop. Then, install downloaded one

HT4623 I can't get my camera to work, or my Photo Booth. Any sugestion

I can't get my camera to work,or my Photo Booth. Any sugestion

Close all apps on your iPad and reset the device.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I can't get my camera to work. Do I need a new phone. I did recently experience some water damage.

I can't get my camera to work. Do I need a new phone. I did recently experience some water damage.

I can totally understand the need of a working camera, Andrewmartin! Let's review your options! Do you have insurance coverage? This can help with replacing the phone because of the water damage. If so, file a claim here http://bit.ly/07CrqPK .
Ed_VZW
Follow us on Twitter @VZWSupport

Can't get Web Sharing to Work

I can't seem to get Web Sharing to work internally or externally with the AE. ON the G5 with MacOS 10.5.6, I have Web Sharing turned on under Sharing, Security > Firewall allows all incoming, Network configured as DHCP with IP 10.1.4.
On the AE, under Internet > Internet Connection I have Using DHCP, Connection Sharing = Share a public IP address. Under DHCP I have a DHCP reservation for my G5 10 10.1.4. Under NAT, I have enable default host at 10.1.4. I currently have NAT Port Mapping Protocol on and have Web Sharing configured (though I have tried with it off).
Under System Preferences > Sharing and Web Sharing selected, when I select my computer's website I get Safari can't connect to server. Same when I try to access a web page hosted here via dyndns.
So, there must be something I'm doing to cause this but I sure can't figure it out.
Any ideas?
Ed

Solved. Just did created /var/log/apache2 directory and a chmod 755 on the directory.
Had to keep digging through discussions to find it.

How can I get Web Sharing to work?

I am having trouble getting web sharing to work - the name for the folder is a NetBIOS name which I can't change - and that is the first part of the problem. Is this a known issue because I have tried it on several computers and it does not work like previous versions.

Perhaps a little more detail?
What error message do you see when you try and access your pages?
You also might need to install a newer version of PHP - one that is compatible with Apache2 (as Leopard uses Apache 2 instead of the Apache 1.3 Tiger used).
There are also a number of settings that the upgrade process does not migrate over.

Cant get web cam to work on motorola zoom!

Please can you help me to get my webcam to work on skype for a Motorola zoom

I already fixed the issue, it seems trhat in dreamweaver the fonts ttf , otf, etc must be in a folder named webfonts, and then dreamweaver connects the fonts stylesheet to the main stylesheeet with @inport.I had to unisntall the fonts from my windows and download them again and add tehm with dreamweaver add web fonts feature.
Thanks ayway.

[12.1.1] Can't get web interface to work.

Hello,
This isn't a fresh install of EBS per se, but it isn't a production EBS system or anything like that. So it was originally installed in December or so, but we haven't really touched it since then. The only thing we use this server for is testing EBS functionality offered by our product. The point in telling you this is that I don't think the web interface ever worked, but since the application seems to be working fine, we never had a reason to fix it until now.
Today I'm trying to schedule some concurrent programs in EBS. Basically, I'm just looking to find out a bit about the concurrent manager scheduling options and how schedules are stored in the DB. As far as I know the only way to do this (schedule a conc. program to run, say, once a day) is through the web interface. If there's another way, I would love to hear it because I don't particularly care that the web interface isn't working besides the fact that I want to schedule a test concurrent program.
Note that I can't access the interface on the EBS box itself either.
Here are my request details:
GET http://oracleebs.advsyscon.com:8000/OA_HTML/AppsLogin HTTP/1.1
Accept: text/html, application/xhtml+xml, */*
Accept-Language: en-US
User-Agent: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0)
Accept-Encoding: gzip, deflate
Host: oracleebs.advsyscon.com:8000
DNT: 1
Connection: Keep-Alive
Cookie: oracle.uix=0^^GMT-5:00^p; __utma=252711254.678514999.1359557956.1359557956.1359557956.1; __kti=1306523819047,http%3A%2F%2Fwww.advsyscon.com%2F,; __ktv=f42d-f27d-cd94-651813032e35c2e; __hstc=252711254.fd397c917966433ca3ad39f9002e7bb0.1359557960441.1359557960441.1359557960441.2; hubspotutk=fd397c917966433ca3ad39f9002e7bb0
Here is the response I get:
HTTP/1.1 500 Internal Server Error
Date: Fri, 09 Aug 2013 14:49:57 GMT
Server: Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server
Content-Length: 304
Connection: close
Content-Type: text/html
<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1><PRE>Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.</PRE></BODY></HTML>
This causes IE to give me a message like "The website cannot display the page. Most likely causes: The website is under maintenance. The website has a programming error."
"uname -a" on the EBS server:
Linux OracleEbs.domain.com 2.6.18-238.el5 #1 SMP Sun Dec 19 14:22:44 EST 2010 x86_64 x86_64 x86_64 GNU/Linux
AKA, this is a RedHat 5 system.
I tried looking at the error_log in Apache/Apache/logs, but it didn't seem to show anything (and it was from like, December 19).
Any ideas as to how to troubleshoot or fix this?
Thank you!

Hi,
I'm just looking to find out a bit about the concurrent manager scheduling options and how schedules are stored in the DB. As far as I know the only way to do this (schedule a conc. program to run, say, once a day) is through the web interface. If there's another way, I would love to hear it because I don't particularly care that the web interface isn't working besides the fact that I want to schedule a test concurrent program.
Yes, you may schedule concurrent request from backend sql/plsql and this has been discussed in forum many a time, please refer:
https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=concurrent+request+backend&rankBy=relevance&contentType=all&containerType=&container=&containerName=&userID=&numResults=15
Also:
https://forums.oracle.com/thread/2160246
Hope this helps!
Best Regards,

How can I get my camera to work again?

Have had my phone for almost 6 months and have never had a problem with the camera. After I did the last upgrade to my iphone which was just a few days ago my camera stopped working. I click on the camera icon and it's either showing the shutter or its just black. The little switch where you can change from camera to video starts flickering a little almost like its frozen? I noticed i had alot of photos imported from my computer so i deleted every single picture on my phone and restored it about 4 times now and still nothing!!! Anybody have any ideas on what im doing wrong??

Hi Evie ray,
Thanks for using Apple Support Communities. Some good first things to try are forcing any camera-using apps to close, and then restarting and resetting:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

HT1338 can't get my camera to work with Skype can any one help me please

cant get my camra to work with skype can any one help me please

You posted in the OS X 10.3 forum instead of the Mac Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
What OS X version are you using?
 Cheers, Tom

How can i get my camera to work

my camera stopped working on skype. how do i fix this?

Apple is investigating the matter. Hope for a fix soon.
Best.

Since installing lion i can't get my camera to work on all chat rooms?

since installing lion i cant turn on the camera, it works on facetime but not webcam chat rooms
whats changed it worked with snow leperd

I am having the same problem, I have submited for help on many different sites including adobe. I will let you know if i find out anything. From what I've found out so far is that this is affecting all Lion users.

Can't get web service to work

I'm getting the following error when trying to invoke an
ASP.NET web service on the same host...
TypeError: Error #1034: Type Coercion failed: cannot convert
Function-2010 to Namespace.
at mx.rpc.wsdl::WSDL/::processNamespaces()
at mx.rpc.wsdl::WSDL$iinit()
at
mx.rpc.wsdl::WSDLLoader/mx.rpc.wsdl:WSDLLoader::resultHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at ::DirectHTTPMessageResponder/completeHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/flash.net:URLLoader::onComplete()
I'm using
http://localhost/Hello/Service1.asmx?WSDL
as the wsdl and it works when I navigate to it with the browser.
Any help would be very appreciated.
Thanks

Sorry for the late response, I wasn't able to access the
forums for awhile there.
I'm using .NET 2.0
Yes I have tried a hello world example. I have a very basic
ASP webservice:
using System;
using System.Data;
using System.Web;
using System.Collections;
using System.Web.Services;
using System.Web.Services.Protocols;
using System.ComponentModel;
namespace Hello
/// <summary>
/// Summary description for Service1
/// </summary>
[WebServiceBinding( ConformsTo = WsiProfiles.BasicProfile1_1
[ToolboxItem( false )]
public class Service1 : System.Web.Services.WebService
[WebMethod]
public string UpdateResponses()
return "Hello World";
My flex code is this:
private function doWebService():void
var service:WebService = new WebService();
service.loadWSDL("
http://localhost/Hello/Service1.asmx?WSDL");
service.addEventListener(ResultEvent.RESULT, success);
service.addEventListener(FaultEvent.FAULT, fault);
service.UpdateResponses();
This works for me, however as soon as I take the flex code
into my real project, I can't access the same ASP webservice.
Here is the WSDL
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="
http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tm="
http://microsoft.com/wsdl/mime/textMatching/"
xmlns:soapenc="
http://schemas.xmlsoap.org/soap/encoding/"
xmlns:mime="
http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns="
http://tempuri.org/" xmlns:s="
http://www.w3.org/2001/XMLSchema"
xmlns:soap12="
http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:http="
http://schemas.xmlsoap.org/wsdl/http/"
targetNamespace="
http://tempuri.org/" xmlns:wsdl="
http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified"
targetNamespace="
http://tempuri.org/">
- <s:element name="UpdateResponses">
<s:complexType />
</s:element>
- <s:element name="UpdateResponsesResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1"
name="UpdateResponsesResult" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="UpdateResponsesSoapIn">
<wsdl:part name="parameters"
element="tns:UpdateResponses" />
</wsdl:message>
- <wsdl:message name="UpdateResponsesSoapOut">
<wsdl:part name="parameters"
element="tns:UpdateResponsesResponse" />
</wsdl:message>
- <wsdl:portType name="Service1Soap">
- <wsdl:operation name="UpdateResponses">
<wsdl:input message="tns:UpdateResponsesSoapIn" />
<wsdl:output message="tns:UpdateResponsesSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="Service1Soap"
type="tns:Service1Soap">
<soap:binding transport="
http://schemas.xmlsoap.org/soap/http"
/>
- <wsdl:operation name="UpdateResponses">
<soap:operation soapAction="
http://tempuri.org/UpdateResponses"
style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="Service1Soap12"
type="tns:Service1Soap">
<soap12:binding transport="
http://schemas.xmlsoap.org/soap/http"
/>
- <wsdl:operation name="UpdateResponses">
<soap12:operation soapAction="
http://tempuri.org/UpdateResponses"
style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="Service1">
- <wsdl:port name="Service1Soap"
binding="tns:Service1Soap">
<soap:address location="
http://localhost/Hello/Service1.asmx"
/>
</wsdl:port>
- <wsdl:port name="Service1Soap12"
binding="tns:Service1Soap12">
<soap12:address location="
http://localhost/Hello/Service1.asmx"
/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Can't get Web Cam to work A665-S6095 Laptop

Similar Messages

Maybe you are looking for