Can't get WiDi working on Portege R705 and Z930

So frustrating!
I had a Toshiba R705 (i3, from Best Buy in the US), which was very nice, until..
I then started to use it for scoring car rallies, and wanted to share my "results" screen with the large tv screen at the local football club where we run the events, so I bought a WiDi device (Netgear Push2Tv).
After several hours of trying to get the R705 to connect to the NetGear box, I installed the latest Intel Networking Wireless drivers, which became corrupt, and stopped all of my networking devices, so now the machine was useless.
I could not connect the PC to ANYTHING anymore, and I could'nt roll back the intel drivers so now my nice little laptop was as useless as a house brick. I got so angry I punched it and broke the screen. I then threw the laptop in the bin in disgust.
After calming down, I have now purchased a Satellite z930 Ultrabook, which is also very nice (and much faster).
Against my wifes best endeavours, I am now trying to connect the Sattelite Z930 to the same Netgear Push2TV.
I get exactly the same errors that I got with the old 705.
The Toshiba detects the Netgear, I enter the matching pin number etc, and then it says it is "connecting" then after a while it drops out.
EXACTLY THE SAME ISSUE AS I HAD WITH THE R705 RUNNING WINDOWS 7 IS STILL OCCURRING WITH THE Z930 ON WINDOWS 8!
To top it off, myfriend brought his other computer around, and suggested we try it. It connected, and he was sharing his screen with the Push2TV within seconds of starting the WiDi software.
WHAT IS WRONG WITH MY TOSHIBAS??? ARRRGGGHHHH.... I've searched this forum and it seems no-one else is having a problem......

Hi
Does your Protg or the Satellite Z930 meets the Intel Widi hardware requirements?
Here is a detailed info what hardware and software is needed to use the Intel WiDi:
+Intel Wireless Display requires a compatible laptop, TV adapter, and a TV with HDMI or composite A/V input.+
http://aps2.toshiba-tro.de/kb0/FAQ1A037S0000R01.htm
I found also another document about known issues using Intel WiDi
+Are there known issues when using Intel Wireless Display (WiDi)?+
http://aps2.toshiba-tro.de/kb0/FAQ1A037T0000R01.htm
last but not least an step by step tutorial how to use Extended Video Mode with Intel Wireless Display (WiDi)
http://aps2.toshiba-tro.de/kb0/HTD26038K0000R01.htm
By the way:
You should ensure that latest Intel Wireless Display Software is installed properly
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22016&ProdId=3227&l ang=eng&OSVersion=Windows%208%2C%2064-bit*&DownloadType=Software%20Applications

Similar Messages

  • Can't get wireless working in Portege R100

    I recently acquired an R100 that had no hard drive in it. I installed a 40GB drive and downloaded the required drivers from the Toshiba website. Everything but the wireless works. All the other dirvers were self-install but the wireless was not. How do I get the wireless going? Thank you...DJ

    Actually, I thought it was built-in.
    I have looked on the bottom of the computer and opened all covers (hard drive, battery and RAM) and have not found any Lan card. Where would it be located, if I had one?
    Also, there is no WLAN card listed in the Device Manager so I am assuming it isn't installed.
    Thanks...DJ

  • Can't get networking working with RALink 3062 Drivers

    So i installed a core install with wireless-tools, but from here i followed the beginners guide to install networking and can't get it working, I even tried and compile the ra2860 drivers for it, said the compile and install worked but still can't get access to the ra0 interface. Need help

    Deleted
    Last edited by impassive (2011-08-27 15:15:27)

  • Can t get to work tint2 launcher

    I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
    i've set up the panel the way i want but i would like to have a few launcher
    I've try serveral thing but i can't get it to work,
    and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
    tks
    Here my tint2rc
    # TINT2 CONFIG FILE
    # horizontal panel
    # squared taskbars
    # idirae config
    # Background definitions
    # ID 1
    rounded = 0
    border_width = 1
    background_color = #808080 20
    border_color = #ffffff 10
    # ID 2 - task active
    rounded = 0
    border_width = 0
    background_color = #feffff 0
    border_color = #d8d8d8 0
    # ID 3 - task
    rounded = 0
    border_width = 0
    background_color = #F5F5DC 0
    border_color = #000000 0
    # ID 4
    rounded = 0
    border_width = 1
    background_color = #888888 0
    border_color = #ED2323 60
    # ID 5 - taskbar
    rounded = 0
    border_width = 1
    background_color = #feffff 10
    border_color = #ffffff 10
    # ID 6 - active taskbar
    rounded = 0
    border_width = 1
    background_color = #feffff 30
    border_color = #ffffff 30
    # ID 7 - tooltip
    rounded = 3
    border_width = 0
    background_color = #222222 90
    border_color = #222222 90
    # ID 8
    rounded = 0
    border_width = 1
    background_color = #888888 20
    border_color = #888888 20
    # Panel
    panel_monitor = all
    panel_position = top left horizontal
    panel_items = LTSBC
    panel_size = 100% 32
    panel_margin = 0 1
    panel_padding = 3 3
    panel_dock = 0
    wm_menu = 1
    panel_layer = bottom
    panel_background_id = 1
    # Panel Autohide
    autohide = 0
    autohide_show_timeout = 0.3
    autohide_hide_timeout = 1.5
    autohide_height = 6
    strut_policy = follow_size
    # Taskbar
    taskbar_mode = multi_desktop
    taskbar_padding = 5 2
    taskbar_background_id = 5
    taskbar_active_background_id = 6
    taskbar_name = 1
    taskbar_name_background_id = 0
    taskbar_name_active_background_id = 0
    taskbar_name_font = Crisp 12
    taskbar_name_font_color = #ffffff 30
    taskbar_name_active_font_color = #ffffff 50
    # Tasks
    urgent_nb_of_blink = 20
    task_icon = 1
    task_text = 0
    task_centered = 1
    task_maximum_size = 20 20
    task_padding = 0 0
    task_background_id = 3
    task_active_background_id = 2
    task_urgent_background_id = 4
    task_iconified_background_id = 3
    # Task Icons
    task_icon_asb = 80 0 0
    task_active_icon_asb = 100 0 0
    task_urgent_icon_asb = 100 0 0
    task_iconified_icon_asb = 80 0 0
    # Fonts
    task_font = BankGothic Md BT 10
    task_font_color = #696969 60
    task_active_font_color = #696969 100
    task_urgent_font_color = #696969 100
    task_iconified_font_color = #696969 60
    font_shadow = 0
    # Launcher
    launcher_icon_theme = elementary
    launcher_padding = 2 2
    launcher_background_id = 1
    launcher_icon_size = 20
    # Specify icon theme names with launcher_icon_theme.
    # if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
    #launcher_icon_theme = AwOkenWhite
    # Each launcher_item_app must be a full path to a .desktop file
    launcher_item_app = /usr/share/applications/chromium.desktop
    launcher_item_app = /usr/share/applications/gparted.desktop
    # Clock
    time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
    time1_format = %I:%M %p
    time1_font = BankGothic Md BT 9
    #time2_format = %A, %B %d
    #time2_font = Ubuntu-L 7
    clock_font_color = #ffffff 80
    clock_padding = 5 0
    clock_background_id = 5
    clock_lclick_command = gsimplecal
    #lock_rclick_command =
    # System Tray
    systray = 1
    systray_padding = 2
    systray_sort = right2left
    systray_background_id = 5
    systray_icon_size = 20
    systray_icon_asb = 100 0 0
    # Tooltips
    tooltip = 0
    tooltip_padding = 2 2
    tooltip_show_timeout = 0.0
    tooltip_hide_timeout = 0.0
    tooltip_background_id = 7
    tooltip_font_color = #ff0000 100
    tooltip_font = Roboto-Thin normal 9.0
    # Mouse
    mouse_middle = none
    mouse_right = toggle
    mouse_scroll_up = toggle
    mouse_scroll_down = iconify
    # Battery
    battery = 1
    battery_hide = never
    battery_low_status = 10
    battery_low_cmd = notify-send "battery low"
    bat1_font = sans 8
    bat2_font = sans 6
    battery_font_color = #ffffff 80
    battery_padding = 5 0
    battery_background_id = 5
    # End of config
    Last edited by jolejo07 (2013-07-05 01:39:25)

    I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
    it telling me
    ==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
    ==> ERROR: Cannot find the strip binary required for object file stripping.
    Last edited by jolejo07 (2013-07-05 01:45:21)

  • I have 2 itunes accounts - one work a/c and one home a/c, but when i sign in at home only my home songs appear even if I sign in my work a/c. I have authorised both computers to show both a/cs. How can I get my work a/c songs to appear at home?

    I have 2 itunes a/cs one at work and one at home. Both computers are authorised for the 2 a/cs, but I can;t get my work a/c songs to show on my home computer, even though I sign in my work a/c, and I can't get my home songs to show up on the  work computer even though I sign in my home a/c. V. frustrating!

    Hi,
    You will have to manually copy your music. Get a pen-drive big enough to accommodate all your music. And follow these steps:
    1. Create a new folder on the pen-drive.
    2. Copy the music from your work computer to the folder you just created. It's in (yourhomefolder)>Music>iTunes>iTunes Media>Music if you're using a Mac, or in C:\Users\(yourusername)\Music\iTunes\iTunes Media\Music if you're using Windows.
    3. Now on your home computer quit iTunes, and copy your music from work to the "Automatically Add to iTunes" folder in (yourhomefolder)>Music>iTunes>iTunes Media.
    4. Start iTunes. It will automatically start to process the files and move them to the appropriate place.
    Repeat these steps with your music from home on your work computer. Also I suggest to use only one iTunes account if possible.
    Hope it helps
    Regards,
    Gábor

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the libray from my iPod and use it in my new computer (Windows)?

    I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the library from my iPod and use it in my new computer (Windows)?

    You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

  • In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

    In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
    Thank you!

    When you erased the disk did you select Mac OS Extended Journaled as the format option?

  • I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    There is only one thing that happens -- the Server does not respond.
    Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
    Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.

  • My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

    My hard drive crashed on my Imac 24" 2009,  I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
    What external DVD can I get to work with the IMac?                              The Apple super drive is not compatible.

    Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

  • Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

    Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

    The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
    (photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
    Did you ever have cs2 installed on this particular computer before?
    If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
    You'll need to use the non activation version of cs2 from here and the supplied serial number:
    Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

  • Can't get Mail working properly

    I just got my new MacPro this week, and it's really great except for I can't get Mail working right. I've set up my accounts and a few emails come through, though not many, and because it's been a week since I've been online, there should be many more than that. Also, I can't send any emails at all, no matter what I do. They will eventually go into my Sent box, but I've been sending them to myself to see if it's working, and they never come through. I spent an hour on the phone yesterday with the tech support for my ISP, and they told me that I'd have to talk to the Apple techs because they didn't have current info for *Mail 3.1*, the version I have, that the latest they had was for 2.something. So I called the Apple tech support and spent 2 hours on the phone with them, and they weren't able to help me get it going correctly either. It keeps giving me error messages such as Connection Failed, or Unable to Receive Mail, saying "there may be a problem with the mail server or network" and that "the connection to the server on ... port has timed out." I'm on DSL and am always online, so I know it's not the internet connection that's the problem. Can anybody give me some advice on what I should try? Any help will be gratefully appreciated!

    Is your ISP Verizon, Demon, or Glocalnet, then it might be Apples biggest Leopard Bug in conjunction with these ISP:s POP-servers.
    The one that randomly changes the settings in "advanced" from "password" to "APOP".
    The visual result of this bug is that you will get a popup-box where Mail asks you to enter your password. (Which is useless entering, since the preference settings are changed.)
    My advice counts only when you are supposed to use "password" as the correct setting in "Advanced" and in conjunction with some ISP:s.
    Michael

  • Can't get webutil working on AS

    Hi All,
    As topic, I can't get webutil working on the application server. I can run individual forms or sessions that do not utilise webutil. As soon as I have baseHTMLjinitiator/baseHTMLjpi/baseHTML defined in the bit of the formsweb.cfg that I am using, I get this problem. The webutiljini.htm etc are located in the forms/server directory as they should be.
    I've got it working fine on my 10.1.2 developer suite XP platform.
    I've been trying without success on the App Server. Version 10.1.2 under Win2003
    I have been right through the installation instructions several time trying to see what I have missed.
    I have installed version 1.0.6 of webutil and version 1.8 of jacob.
    I try and run the wu_test_106 form, and all I get is "Applet Started" at the bottom of the browser window, and a blank browser window.
    My URL is
    http://10.64.125.51:7778/forms/frmservlet?config=webutil1
    The config in the formsweb.cfg is:
    [webutil1]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    baseHTML=webutilbase.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=generic
    form=wu_test_106.fmx
    width=100%
    height=100%
    separateFrame=True
    The other parameters are default. If I try a different form name it makes no difference.
    I've done the other configuration stuff, default.env, signing jar files, etc.
    The java console just shows:
    Oracle JInitiator: Version 1.3.1.22
    Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\griggto01
    Proxy Configuration: Manual Configuration
    Proxy:
    Proxy Overrides:
    JAR cache enabled
    Location: C:\Documents and Settings\griggto01\Oracle Jar Cache
    Maximum size: 50 MB
    Compression level: 0
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    Loading http://10.64.125.51:7778/forms/java/frmwebutil.jar from JAR cache
    RegisterWebUtil - Loading WebUtil Version 1.0.6
    Thanks for your help.
    Tony

    Hi Tony,
    Form your post it doesn't look like jacob.jar is being loaded. Can you confirm that you have the following files in the <ORACLE_AS>/forms directory:
    java\
       jacob.jar
       frmwebutil.jar
    webutil\
       d2kwut60.dll
       jacob.dllAlso open up your default.env file and check that
    ORACLE_HOME         -- is correct
    FORMS_PATH            -- has the path where wu_test_106.fmx is located
    WEBUTIL_CONFIG      -- is correct (I've experienced what you describe when this path was invalid)
    CLASSPATH             -- contains frmwebutil.jar
    Regards
    Tom Casserly

  • Can't get my work email to load on my new phone

    I can't get my work email onto my Droid X.   Anyone know the trick? 

    Carl3 wrote:
    I can't get my work email onto my Droid X.   Anyone know the trick? 
    First quesiton I have is do you have authorization to access your work email from your Droid X? Just knowing the email address and password is enough for you to get your personal email, but your employer must approve remote access.
    If it's okay with your employer, you may also need to know the incoming and outgoing email server addresses, the port number, and your username on your employer's email server. If you're not sure what they are, check with your IT admin AFTER you get confirmation that it's okay to get your email.

  • Australia Post Shipping - Can't get to work

    Hi,
    I have read all the online support docs I can find and I just can't get Australia Post Shipping to work on our site for international orders.
    Everywhere it says:
    Choose your shipping provider
    Enter your account details
    Your customers see real time shipping costs!
    But Australia Post selection doesn't let us enter account details - does anyone know where I enter them?
    (see image at bottom)
    And after I allocated sizing, weights etc to every product it doesn't even look like it even works:
    (see how there are no options to select)
    Does anyone have any ideas on how to get it to actually work? I can't imagine BC would role something like this out if it didn't even work but from all my googling I can't see that anyone actually uses it (or at least comments on using it!)
    Would love any help

    I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
    it telling me
    ==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
    ==> ERROR: Cannot find the strip binary required for object file stripping.
    Last edited by jolejo07 (2013-07-05 01:45:21)

Maybe you are looking for

  • Can't use encoder from Premiere to encode an mpg

    Okay, this is a big problem as I'm on a really tight deadline.  Does anyone have any solutions?  I am a fairly new Premiere user, about 4 months.  Is there any fix for the encoder?  I tried the reainstall, changing the file name to lower case with no

  • The tool for testing developed system

    We have already developed a system base on WebAS.Is there  some test tool for the developed system such as J Unit in Java?Thanks.

  • Port Availability checking is take long time during prechecks in EBS 11i.

    Hi, While installing EBS 11.5.10.2 in RHEL4.0, Port Availability check taking long time(almost 3 hours) during prechecks stage. Can any body help me to over come this problem? Thanks in-advance for your help. Regards DBA.

  • Insert Flash Button Error

    When I try to Insert Flash Buttton, I am now getting the following error message: While executing object Tag in Flash Button.htm, the following JavaScript error(s) occurred: At line 205 of "C:\Program Files\Macromedia Dreamweaver MX 2004\Configuratio

  • Equipment BOM query

    Dear All, After maintaining equipment BOM , i think we are only able to issue (BOM Maintained)material against the Maintenance Order but its not happening.?? ? i think i am missing some customization, is it?. Plz guide, n do tell me main benefits of