Can't getting startet Windows 2000 ist that the problem?

I can't start with my brandnew Shuffle!
When I connect it to the USB just the yellow light is blinking, no charge at all during the whole night. It is said a Setup Assistent would start after connection but it didnt appear.
I thought it might be since it seemed to be conf as a mass storage. But where can I change that?
I'm not able to download Itunes as well. Message : you need XP or Vista - but I dont have this, I have windows 2000. Does it mean, I cannot use my Ipod at all?

Did you try: http://www.apple.com/ipod/start

Similar Messages

I can't update my apps, I think that the problem is that I've change my password from my ID Apple but they have not change from the telephone configuration. Any idea?

I can't update my apps, I think that the problem is that I've change my password from my ID Apple but they have not change from the telephone configuration. Any idea? Thanks

Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

Home network - How can I get Tiger & Windows 2000 to connect?

This has been an ongoing annoyance for some time now.
I cannot get my G4 iMac running the latest updated Tiger to connect to a PC running Win2K (home network) through a basic router and junction box.
Both are connected to the internet (DSL) via a router, then one of those "splitter" or junction boxes (what's the right term for this thing?) -- the connection goes from the DSL outlet on the wall, to the router, then into this junction box, which then connects the iMac and the PC to the net.
No problems with the net connection for both machines.
Way back when I first had a different PC connected to this configuration, I COULD see the PC from the iMac, and vice versa. File sharing worked seamlessly.
Then one day, for no good reason, the Mac could no longer "see" the PC ... but the PC could see the iMac. So I resigned myself to swapping files to and from the PC.
Just recently, I changed internet providers for my DSL, resulting in an entirely new IP address setup for each machine. Both machines now get the net. But now NEITHER machine can see the other.
From the Mac, I have tried:
Clicking on the Network icon in the Finder
Typing various different things into the window that results when I click "GO" then "Connect To Server" -- the IP address of PC, the name of the PC, etc.
Ensuring "Windows file sharing" is engaged in the "Sharing" window of the System Preferences
Ensuring "Appleshare" is on
Ensuring the firewall allows traffic with windows file sharing
From the PC I have tried:
Ensuring the main drive is shared
Installed every network sharing device I could (TCP/IP, etc)
From the "My Network Places" window, tried "adding a new network place" (iMac doesn't show up)
Clicking on the "Computers Near Me" icon (nothing but the PC itself shows up)
Clicking on the "Add Network Place" icon (cannot find the iMac no matter what I type into the window, or when I click "Browse")
Why is this so difficult? Why won't it work now when it did before? Why has the machine-to-machine capability of seeing each other steadily degenerated over time?
I know I can go out and buy "Dave" to possibly get this working ... but I shouldn't have to, Tiger has been touted as the most amazing networking thing yet. And, it worked before.
Is there a way to run a diagnostic on the networking function of Tiger? Could it have possibly been damaged?
Any suggestions?

This has been an ongoing annoyance for some time
now.
I cannot get my G4 iMac running the latest updated
Tiger to connect to a PC running Win2K (home network)
through a basic router and junction box.
Both are connected to the internet (DSL) via a
router, then one of those "splitter" or junction
boxes (what's the right term for this thing?)
you could mean a hub or a switch, but how many ports does your router have?
the connection goes from the DSL outlet on the wall, to
the router, then into this junction box, which then
connects the iMac and the PC to the net.
No problems with the net connection for both
machines.
Way back when I first had a different PC connected to
this configuration, I COULD see the PC from the iMac,
and vice versa. File sharing worked seamlessly.
Then one day, for no good reason, the Mac could no
longer "see" the PC ... but the PC could see the
iMac. So I resigned myself to swapping files to and
from the PC.
Just recently, I changed internet providers for my
DSL, resulting in an entirely new IP address setup
for each machine. Both machines now get the net. But
now NEITHER machine can see the other.
This is not normal your internal ip addresses would remain the same even if when you change your ISP.
From the Mac, I have tried:
Clicking on the Network icon in the Finder
Typing various different things into the window that
results when I click "GO" then "Connect To Server" --
the IP address of PC, the name of the PC, etc.
Ensuring "Windows file sharing" is engaged in the
"Sharing" window of the System Preferences
Ensuring "Appleshare" is on
Ensuring the firewall allows traffic with windows
file sharing
From the PC I have tried:
Ensuring the main drive is shared
Installed every network sharing device I could
(TCP/IP, etc)
From the "My Network Places" window, tried "adding a
new network place" (iMac doesn't show up)
Clicking on the "Computers Near Me" icon (nothing but
the PC itself shows up)
Clicking on the "Add Network Place" icon (cannot find
the iMac no matter what I type into the window, or
when I click "Browse")
Why is this so difficult? Why won't it work now when
it did before? Why has the machine-to-machine
capability of seeing each other steadily degenerated
over time?
It sounds to me your network needs to be troubleshooted before we can answer that.
I know I can go out and buy "Dave" to possibly get
this working ... but I shouldn't have to, Tiger has
been touted as the most amazing networking thing yet.
And, it worked before.
You don't need Dave at all. Samba is the pc filesharing protocol and that is built into Tiger.
Is there a way to run a diagnostic on the networking
function of Tiger? Could it have possibly been
damaged?
Yes there is away to diagnose your problem we can work on that.
Any suggestions?
What is the make and model of your dsl modem?
What is the make and model of your router? What is the make and model of the box your refer to as splitter.
Also goto the network preferces of your mac and post back what your ip address is and what router ip address you have.
On your pc goto the start menu, click run, enter the work 'command' press enter.
In the dos window type
ipconfig
press enter
and post back the results.

I can't link my homesharing to my apple tv. i'm on windows 7. is that the problem?

Can anyone help. I bought apple tv yesterday, but everytime I enter my apple id on the screen of apple TV it says not recognised. it is working on all other devices, including 'homeshare' on itunes. Is there something in windows 7 is the problem?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Where can I get a windows installer disc for the bootcamp installation process?

I use an imac 10.9.5 maverick, with a 3.06 GHz intel core 13 processor, and a 4 GB 1333 MHz DDR3 memory. I am using BootCamp 1.0, and I need a windows installer disc to complete the installation process. Where can I get one of these discs?

Try Amazon, E-bay ........
buy windows installer install disk

Fellow users, I bought, through app store, the application "Amplitube Slash" but I can't get it working so here's the problem: I do all the connections but when i lunch the app i can't ear nothing and the input says none. Pls help. Best regards

Dear users,
I bought recently the app "Amplitube Slash" for my iPod touch, through the app store and I paid 8€ for it.
When I tried to play guitar using the application with "Amplitube iRig", I could not listen anything as the input says "none". I would like to know how or if anyone knows how to solve this problem.. You can ask anything if you need more details.
Best regards
Duarte

Here is their support site.
http://www.ikmultimedia.com/c
Here is Apple's support article:
iOS: Troubleshooting applications purchased from the App Storetact-support/

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

I purchased a MyBook Studio 4gb external hard drive. I can't get it to work properly. WD have assessed it and say its fine and that the problem is with Apple?

I purchased a MyBook Studio 4gb external hard drive. I can't get it to work properly. WD have assessed it and say its fine and that the problem is with Apple? Any ideas?

Hello EucaBlue!
So in Disk Utility, with the external harddrive selected, go to the Partition tab, and then under "Partition Layout:" select 1 Partition.
After than, verify that it is formatting the drive as "Mac OS Extended (Journaled) under "Partition Information"
Also verify that it's using using the GUID Partition Map under the Options button at the lower left of this window.
Then click apply and confirm that you want to format the drive. It will ask you if you're sure, and probably for an Administrator password.
Once your harddrive is formatted properly, you should be able to use Time Machine, or any other Mac backup software.
Happy tinkering!
Paul

I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.

I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.

Do you have OS X and OS 9 installed on your Mac? If so, startup with the Option key depressed. This will open the Startup Manager window. Select the OS you want to start from & click the right arrow.
 Cheers, Tom

How do I download the windows support software for my Mac? I am getting an error message saying that the software is not available

How do I download the windows support software for my Mac? I am getting an error message saying that the software is not available

Welcome to Apple Support Communities
I do not recommend you to download the Windows support software through Boot Camp Assistant.
Instead, you can download the Windows support software for most Macs from the Apple website. Go to this website, look for your MacBook Pro model and the Windows version you want to install, and follow its steps.
To install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

I can't get itunes to start now that I downloaded 10.5.3

i can't get itunes to start now that I downloaded 10.5.3

Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

Iphone 4s is not recognised by my pc; I get a message to say that the device malfunctioned and not recognised by windows

My iphone 4s is suddenly not recognised by my pc; I get a message to say that the USB device is not recognised, and that the last device malfunctioned and not recognised by windows.

Hey Jacky,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides information and troubleshooting suggestions that can help you resolve the issue with your iPhone 4s not being recognized by iTunes on your PC.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Cheers,
-Jason

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

What version of iTunes are you running on your computer? You need to update to the current version.

HT1904 How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Can't getting startet Windows 2000 ist that the problem?

Similar Messages

Maybe you are looking for