Can't give iis users special permissions to folder in iis 8

I installed an ssl certificate to a 2012 server (had been working on a 2008 server for years). I can't duplicate the iis usrs rights that existed on the previous server. It's not available (grayed out). And not available in the advanced tab. I am logged
in as administrator. There is no way to add that attribute, even though that's the only way I got the ssl site to work in 08 server installs. I checked with the certificate issuer and there is nothing wrong with it. It displays in the ssl settings under iis.
I also have the problem of the folder where the file needed to be written to resides. The folder has the read only box checked and when I uncheck it and click apply, it doesn't save after exiting. I have tried using attrib -r at the command prompt, with no
success either. It is evident that these iis users coming to the website can't write to the ssl file unless they have special permission, as well as read, execute (they run an asp script), write. Since I can't give them these rights, the website doesn't function
on this server. I did turn off the firewall. The message you get when you go to the url is a 404 and "you don't have rights to this directory etc."
patricia hartman

Hi Patricia,
> I can't duplicate the iis usrs rights that existed on the previous server.
Regarding IIS based issue, I suggest you refer to experts from IIS forum to get professional support:
http://forums.iis.net/
Best Regards,
Amy

Similar Messages

Give a user read permissions to folder but deny him/her copying contents? Is it possible?

Hi,
Is there a way to give a user read permissions to a folder but deny him/her copy permissions? I have been searching for way to do this in windows server 2012 R2 without any luck. I have a folder that i would like a user to see the contents but not change
or copy it. Any one who know the tricks?
Thanks,
Jama.

Yes,
Give the user read permissions to a folder, then he only read, but not write. Additionally, you can set Deny Write, to overwrite any inherited permissions.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Can anyone give me user exit name for create/update purchase order partners

Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.

hi,
check these exits.
Transaction Code - ME21N                    Create Purchase Order
Enhancement/ Business Add-in            Description
Enhancement
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number

How can i give multiple users admin access?

I would like to give another user on my macbook pro admin access, so that they can install programs without having to ask me for the password each time. I do not want the password to be the same for my profile, because I don't want them getting into my account. So is it possible to have a separate password for admin use only? This might be a dumb question and I know their is probably a simple way to do this, but I'm new to macs so any help would be greatly appreciated. Thank you.

Convert a standard user to an administrator
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
Select a standard user or managed user in the list of users, then select “Allow user to administer this computer.”
http://support.apple.com/kb/PH18891

How can I give an user the right to change passwords

I'm still absolute server beginner, so I have to ask here.
How can I give users the right to change passwords or to view calendars?
I didn't find it, yet.
I've found an option to change rights, when I click on the user with two fingers (right mouse button). But all options in this menue are grey.

Hi Holger,
These are two fundamentally different issues. I'll try to address them each. For both you will need to have OpenDirectory set up (see the Users Next Steps list in the Server app). Once that is done. Additionally you will need the Server Admin Tools 10.7. Once you have them installed, you can specify the OpenDirectory password requirements for users
User Passwords in OpenDirectory
On the server, open Server Admin app.
Connect to you server, then click on the OpenDirectory service.
Click on the Settings icon.
Click on the Policies tab.
Click on the Passwords sub-tab, and you can set all the criteria for password requirements here.
Resetting Passwords
Users must log in as network users on the client computer.
Once logged in, to change the password, open System Preferences.
Click on Users & Groups.
The user icon will be a silhouette with stars in the background. This means it is a network user. Click on the Password tab at the top.
Click the Change Password ... button to change the password.
Calendars in iCal are much like RSS feeds: users need to subscribe to them, like we discussed in our other posting. Network users will automatically be given a network iCal calendar, and will be automatically subscribed to it. However, if you want to automatically add subscribed calendars to network user's accounts, you will need to use ProfileManager.
On the server, open Server app.
Click on the Profile Manager menu item.
Make sure that iCal service is running (green indicator next to it). Click on the "Include configuration for services: ...". Make sure the iCal icon is listed there.
Click the "Sign configuration profiles" checkbox.
Turn Profile Manager on.
Once Profile Manager has loaded (the gear at the bottom right will no longer be spinning), go ahead and click the Open Profile Manager link.
Log into Profile Manager as your directory admin user.
Click on the Groups menu item to give all users of a specific group access to the wiki calendar. This is best if you have a wiki for a group and want to share that calendar. Use the Everyone group to add this calendar for all users.
Click on Users to give access to only specific users.
Edit the profile for the group(s) or user(s) you selected by highlighting that group and clicking the edit button.
Scroll down and select the CalDav item on the left.
Click configure. Here you will need to enter the specific details for that callendar based on the subscription details you get when subscribing to the calendar via the wiki.
After all that you still need to configure each client computer to be set up for profile management, which really is a topic of its own. I recommend the following tutorials:
Installing OS X Lion Server
OS X Lion Server Administration Tool Tour
Setting Up Profile Manager on OS X Lion Server
Using Profile Manager on OS X Lion Server
Hope this helps, good luck!
~Mike

How can a Win2K/XP user access my Shared folder as Guest?

Well, it's all in the question, guys. I don't want them to be able to log into my machine. All they need to do is send me some files or take some of mine from \Users\Shared. Surely it shouldn't be too difficult, right?
We're in an office wired LAN and I'm the only Mac among many incarnations of Windoze. Right now they all have to log in as 'Administrator' (just the accoune name, not the kind of account, of course...) but it means that I have to fiddle with the permissions of the shared dir in that user account so I can access it from my regular account ('Alex') and I would prefer something more straight forward. Such as a Guest User log-in option.
Many thanks.

Try Sharepoints. I'm not certain about this, but I think the only way to get access to a Mac over the network is to have an account on the Mac. So, you could set up "guest" as an account and let them log in as that, but it wouldn't give them access to the Shared folder. Sharepoints will let you "share" it out.
1.8 SP G5/iMac G4 FP/PB G3 Pismo Mac OS X (10.4.4) XLR8 G4 Upgrade for Pismo

How can we give a user, alter procedure privilege on only one procedure of another schema.

Scenerio:
User A owns a procedure
called 'TESTPROCEDURE'.
User B has execute privilege on 'TESTPROCEDURE';
Now i want to give user
B , alter procedure privilege for only one procedure i.e 'TESTPROCEDURE';
I do not want to give
ALTER ANY PROCEDURE to user B since the user just wants to alter only 1
procedure.
How can we do that?
Thanks & regards,
Mohd Shahid Shaikh.

Why do you want to do this?
If I'm allowed to alter a procedure, I can alter it to do something completely different. I can modify the procedure to do anything that B can do. If that's what you want to allow, why not just log in as A?
There is no way to grant B the ability to alter a single procedure. You could, I suppose, create another procedure in A that accepts a DDL statement as a string, checks to see if it meets your criteria, and then executes it. You could then grant B the ability to execute this new procedure. A could then send an appropriate CREATE OR REPLACE PROCEDURE statement to the new procedure that replaces TestProcedure. But that's a fair amount of effort and complexity to deal with (particularly when there are errors)-- if you can explain the underlying business problem, we may be able to help you come up with alternate technical solutions.
Justin

How can I give the "user interface thread" higher priority?

We do alot of activex calls to front panels. We need to increase/decrease the priority of the user interface thread to resolve our thread problem. Anyone know how to do this?
Chuck

Hello,
As P.M. was saying, you can adjust the thread priorities
through the VI Properties dialogue.
Another place to modify the multithreading system in LabVIEW is a VI
located at: [LabVIEW Directory]\vi.lib\Utility\sysinfo.llb\threadconfig.vi. However I do not think this will remedy any
problems you are having.
From a Multithreading in LabVIEW tutorial (http://zone.ni.com/devzone/conceptd.nsf/webmain/d2e196c7416f373a862568690074c759)
Priorities in the User Interface and
Single-Threaded Applications
Within the User Interface execution
system, priority levels are handled in the same way for single-threaded and
multithreaded applications.
In single-threaded applications and
in the User Interface execution system of multithreaded applications, the
execution system queue has multiple entry points. The execution system places
higher priority VIs on the queue in front of lower priority VIs.
If a high-priority task is running and the queue contains only lower priority
tasks, the high-priority VI continues to run. For example, if the execution
queue contains two VIs of each priority level, the time-critical VIs share execution time exclusively until both finish.
Then, the high priority VIs share execution
time exclusively until both finish, and so on. However, if the higher priority
VIs call a function that waits, the execution system removes higher priority
VIs from the queue until the wait or I/O completes, assigning other tasks
(possibly with lower priority) to run. When the wait or I/O completes, the
execution system reinserts the pending task on the queue in front of lower
priority tasks. Refer to the Synchronous/Blocking Nodes section for a list of
asynchronous functions that wait.
Also, if a high priority VI calls a lower priority subVI,
that subVI is raised to the same priority level as the caller for the duration
of that call. Consequently, you do not need to modify the priority levels of
the subVIs that a VI calls to raise the priority level of the subVI.
Thus changing the priority of your VI will change the
priority of UI calls for that particular VI.
Again, I caution you because I suspect that if you are having problems
with your application not running correctly, I do not believe that manipulating
the thread priorities will resolve these issues.
Hope this helps,
Travis M
LabVIEW R&D
National Instruments

How can I allow network users to use File Sharing on 10.8 Server?

I am in the process of setting up a new OS X 10.8 Server. I have exported/imported the network users from my previous OS X 10.6.8 Server using Workspace Manager. I have re-entered the passwords of the users. I have existing clients running (stil logged in).
I have set up the File Sharing service in Server.app. I have several mount points. I have made the Users mount point available for home directories over AFP.
Now, the system administrator can connect to the server and get access to the file shares. So the basic file sharing system works.
Also: the users on a client can get there password verified (e.g. when unlocking screen protection) by the server. It is just AFP they can't get access to, while the system administrator account (OD /Local on the server) can be used. So, the password in the server is OK too. It seems to be a matter of privileges.
But no network user (OD user in directory /LDAPv3/127.0.0.1 on the server) can get access. Where can I give network users privileges for File Sharing on the server?
I did try to add either the "Open Directory Users" group or a specific user that was imported into com.apple.access_afp. If I do that, there is partial success. I can connect to the server from the client with a user account other than system administrator from the server (but connecting is slow). But Mobile Home Sync does not work:
1:: [13/04/05 16:11:10.379] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:11:20 +0000
1:: [13/04/05 16:11:20.782] ==========================================================
0:: [13/04/05 16:11:20.782] Starting automatic sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.786] Peer "network" reports changes since last sync.
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:alias:]: isRemote = NO
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: peer = <SPeer_FS:0x7fd5a5009520> = local, optionalStoreID = (null), peer.storeIDString = *
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootPath        = /Users/gerben
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: storePath       = /Users/gerben/.FileSync/store.filesyncstatetree
1:: [13/04/05 16:11:20.787] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootAlias       = {path='/Users/gerben', targetName='gerben', volumeName='Macintosh HD', type=DIR, volumeCreateDate=2010-08-10-12:58:16, targetCreateDate=2011-08-28-18:39:13, parentDirID=37638, nodeID=3003598, filesystemID=0000 ('0000'), signature=0x482b ('H+'), isBootVolume=YES, isAutomounted=NO, isEjectable=NO, hasPersistentFileIDs=YES, mounted=YES, url='file://localhost/'}
0:: [13/04/05 16:11:20.789] -[SPeer_FS _mountServerCallbackShares:status:]: received error 64
0:: [13/04/05 16:11:20.790] EXCEPTION: _mountServerCallbackShares:status: (Host is down) <-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64">
0:: [13/04/05 16:11:20.790] USERINFO: {
0:: [13/04/05 16:11:20.790]     NSLocalizedDescription = "Host is down";
0:: [13/04/05 16:11:20.790] }
0:: [13/04/05 16:11:20.790] BACKTRACE: {
0:: [13/04/05 16:11:20.790] ? | 0x105cb79b7
0:: [13/04/05 16:11:20.790] ? | 0x105cbf0e5
0:: [13/04/05 16:11:20.790] ? | 0x105c2c866
0:: [13/04/05 16:11:20.790] ? | 0x105c2babd
0:: [13/04/05 16:11:20.790] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.790] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.790] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.790] }
1:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. (-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64")
0:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. Not enough peers will be available to continue syncing.
0:: [13/04/05 16:11:20.790] Aborting sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.790] -[SPeer abortSync] "local"
1:: [13/04/05 16:11:20.797] -[SStore_FS setupWithAlias:andRef:] (Store-FS.m:447): unlink('/Users/gerben/.FileSync/.fstemp.QW1Gh-bhvgEhVwmG3.noindex')
0:: [13/04/05 16:11:20.798] EXCEPTION: !IF <-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'">
0:: [13/04/05 16:11:20.798] BACKTRACE: {
0:: [13/04/05 16:11:20.798] ? | 0x105c2bb66
0:: [13/04/05 16:11:20.798] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.798] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.798] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.798] }
1:: [13/04/05 16:11:20.798] -[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:476): unlink('/Users/gerben/.FileSync/store.filesyncstatetree.statetree_dirty')
1:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. (-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'")
0:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. Not enough peers will be available to continue syncing.
1:: [13/04/05 16:11:20.798] EXCEPTION: SFAbortedException <-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'">
1:: [13/04/05 16:11:20.798] -[SSyncEngine threadMain_SyncEngine_sync:]: sync failed with exception "-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'"".
0:: [13/04/05 16:11:21.066] Sync of "HomeSync_Mirror" encountered errors. (_mountServerCallbackShares:status: (Host is down))
0:: [13/04/05 16:11:21.067] Last successful sync completed at 2013-04-04 20:17:15 +0000.
0:: [13/04/05 16:11:21.067] Finished sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:21.067] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:31:21 +0000
1:: [13/04/05 16:11:21.284] 1-pass sync of "HomeSync_Mirror" took 0.02 seconds

Hi Gerben,
Try creating a brand new user, that's not imported and see if that works. Every user/group has a little gear in the Server.app/Users or Groups which allows specific access to specific services, perhaps filesharing is off in that section?
Is your DNS setup properly? Can you verify that clients can see the FQDN of your server?
After setting up the Users folder for mobilehomes, did you check whether the group and the separate users have access to filesharing? I am able to select the correct homefolder /Users and restrict the homefolder size.
Goodluck!
Jeffrey

List the user's permissions

Dear Experts,
May I know how can I list the user's permissions; currently use Tcode & etc.?
wilson

Hi Wilson,
See from SU01, you get the information about Which roles are assigned to the specified USER.
E.g Z_SPRO
and in PFCG transaction, you enter this role ( Z_SPRO), and you will get a list of Transaction Codes assigned to Role (Z_SPRO).
But please Note that, You must have the authorization to Display the Role in PFCG transaction, otherwise you can not see the Transcation Codes Assigned to that Role.
so link is like this
USER ID > Roles> Transaction Code
I hope you will find this helpful.
If my answer is satisfactory, Please grant me the points.
Regards,
Amol Joshi

Can I batch change user access to folders & file read-write permissions?

I had a corrupted user account on my iMac and after weeks of trying repairs I followed a forum suggestion to delete my account.
Before doing so I synced all my document folders and files (since 2004) over my LAN to an external hard drive that was attached to my MacMini. I then deleted the iMac account.
Next I backed up my Mac Mini user account with Time Machine. I then created a new iMac User account on the iMac and let the iMac access Time Machine to bring over all my MacMini preferences, settings, desktop, etc. I now have a fully functioning iMac user account.
Here is the problem. I attached the USB external drive directly to my iMAC. I can access some of the folders and files on the external hard drive. Most of them refuse to let me acces the folder or open a file. If I use the GET INFO command I see an "_unknown" user with "read and write". I see an "everyone" with "no access". I can individually change each folder and file to allow my user account access and give myself permission to read and write the files. I cannot delete delete the "_unknown" account.
It will take me days to individually change each folder and file manually like I am now doing.
Is there a way to use Automator to add my user account to the folder or file and give me read and write folder and file permissions?
Or is there any other way to do this in a batch change?
Is there something I need to do to the external files right now that will ensure that I can access them if either computer crashes and I need to replace the MAC? I would hate to have to go through this again. Would having a MAC server instead of an external drive solve this?
I am using MAC OS 10.6.8 with the most recent updates installed (as of today).
Thanks,
Sandi Dickenson

Select the icon of the external drive in the sidebar of a Finder window, and open the Info window. In the "Sharing & Permissions" section of the window, click the lock icon and authenticate. Make sure you have read & write access to the volume by changing the settings if necessary. Then, from the action menu (gear icon), select "Apply to enclosed items."
The "_unknown" user and group are assigned automatically to files on a volume with the "Ignore permissions" option set.

How can I give access to a new user for WebView Reporting Log In //IPCC Enterprise

Hi All,
How can I give access to a new user for the WebView Reporting Log In ?
I have IPCC Enterpise 7
Thanks
Andres

Two options: 1. In configuration manager on the AW, use the user list tool to add the users domain account and select Webview access permissions. 2. Using standard Microsoft Active Directory tools or the Cisco Domain Manager tool, add the desired AD user account into one of the "WebView" security groups created within the Cisco OU.

How can I give a vpn user a static ip address?

I have OS X Lion server setup to accept vpn connections.
I am connecting to the OS X Lion server from my macbook pro via L2TP over IPSec.
The connection works fine however I keep getting a different ip when I connect.
I would like to somehow reserve the IP that my macbook pro is assigned so that I can always have the same IP address.
I have attempted to change the Settings on my macbook pro to use "Manual" instead of PPP for the setting under the TCP/IP tab and hand enter an IP address but it seems to get ignored when I connect to the VPN server.
The address starting range that my OS X server assigns is 192.168.10.224. I've tried to manually set .223, .227 and neither have been accepted.
Any help would be appreciated.

I don't think you are following what I'm asking. I need a prompt to appear that says the machine needs to be rebooted. There is no prompt. I need the prompt.
James A+, Network+, MCP
I got the prompt to come up. But it only gives the user 1.5 hours to reboot. I'd like to extend that time.
James A+, Network+, MCP

Can we give an option of having multiple PLDs to user to select the PLD

Hello Experts,
Can we give an option of having multiple PLDs to user to select the PLD from list, when it selects the PLD, it will opened.
One option is to choose the the PLD from Layout Designer windows, as we can make it default and then open it. I don't want to give right to user to make any PLD default ....
But I am looking for option as it ask me at run time when I press the Preview button.
plz tell me

Hi
You can make one PLD default for current user
Regards
Rashid

I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as ea

I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as easily as someone with 50 projects. In other words, is there a way to make the form "expandable?"

Hi Ms Buckner,
Yes, you can do this with the Show/Hide "Skip" logic rules.
1. Suppose, for example, you have your first ten projects showing by default.
2. At the end of those fields, you would have a Yes/No question asking if the person wanted to add more projects.
3. If they answer "No", they move on to the next section/area/question/etc.
4. If they answer "Yes" you have the form display ten more project fields that you had already included, but you had hidden up to this point.
5. Repeat steps two, three, and four as often as needed. (It helps that you can copy and paste fields, including groups of questions, so you don't have to manually re-create them each time.)
It means you must anticipate the maximum number of times you want to provide project fields, but you've already done that, and you have to build the form with that maximum number, but only display smaller portions at a time until they have filled in all they need.
I hope that helps,
Brian

Can't give iis users special permissions to folder in iis 8

Similar Messages

Maybe you are looking for