Can't good sync to mozilla server. It's very slow or sometimes failed. i believe it's because of chinese [g][f][w]. what should i do?

can some computer network genius destroy the [g][f][w] ? a lot Chinese people angry at it.

i feel like it's going more and more difficult to success sync.
the chance of fail sync is getting big.
I'm worried that not long time later it will become completely impossible to success sync.

Similar Messages

  • Weblogic server performance is very slow and memory consumption is 99%

    I am facing one critical issue with the weblogic server..
    The server performance is very slow and one of the process is consuming more that 99% of the memory. Bouncing the server is not resolving the issue.
    Can see the memory usage below...
    Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie
    Cpu(s):100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
    Mem: 7990656k total, 7947652k used, 43004k free, 9164k buffers
    Swap: 16386260k total, 4691704k used, 11694556k free, 56352k cached
    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    10263 oracle 24 0 10.9g 6.5g 14m S 99.2 85.3 34:31.52 java
    7409 oracle 16 0 12764 768 508 S 0.3 0.0 0:16.45 top
    Can some body help me on this.
    Thanks in advance.
    -Prasad

    Use the weblogic forum-
    WebLogic Server - Upgrade / Install / Environment / Migration

  • SQL server is Running Very Slow

    hi,
    I used this following query for finding out how many connection are connected, it is showing that 70 connections,my ram is 16GB,  but still my sql server is running very slow. how can i increase my sql server speed. or how can i analyses that.I checked 
    even when no job was running, but still same speed. I'm using store procedures, SQL jobs no inline queries.
    SELECT
    DB_NAME(dbid) as DBName,
    COUNT(dbid) as NumberOfConnections,
    loginame as LoginName
    FROM
    sys.sysprocesses
    WHERE
    dbid > 0
    GROUP BY
    dbid, loginame

    hi,
    I used this following query for finding out how many connection are connected, it is showing that 30 connections,my ram is 16GB,  but still my sql server is running very slow. how can i increase my sql server speed. or how can i analyses that.I checked 
    even when no job was running, but still same speed.
    SELECT
    DB_NAME(dbid) as DBName,
    COUNT(dbid) as NumberOfConnections,
    loginame as LoginName
    FROM
    sys.sysprocesses
    WHERE
    dbid > 0
    GROUP BY
    dbid, loginame

  • MDM Server is responding very slow

    Hi,
    I am working with only 21,695 records and MDM Server is responding very slow.
    MDM Server is running on Intel(R)Xeon(TM) 2.40Ghz 2.39Ghz, 3.89 GB of RAM.
    System: Microsoft Windows Server 2003 Standard Edition Service Pack 2.
    The hard disk partition F: has 43.7 GB Freespace.
    It is impossible to do MDM Workflow matching and Merging with this slow speed.
    Regards
    Kaushik Banerjee

    Hi Kaushik,
    Please try to stop and restart the database server.
    You can check the below:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_mdm/~form/handler7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303132373435%7d
    Re: MDM Server is very slow and locks users out
    Hope it helps.
    Thank you,
    Priti

  • CQ5 server is responding very slow?

    Hello,
    CQ5 server is responding very slow, when I start to create package through package manager and I am creating package for a DAM and its responding very slow.
    There is only one user accessing server.
    when I started to create package it may be opening lot of CRXSession, I checked using below command
    jmap -histo:live <pid> | grep CRXSessionImpl
    And it show me more than 110 CRXSession is opened.
    Can any one tell me how we can optimize server, how we can close CRXSession automatically, even I run garbage collector still getting same issue.
    Regards,
    Satish

    For starters answers to a few questions would help:
    1. What kind of hardware config is in place? (RAM, disk-space)
    2. Which OS are you running instances? Are both author and publish on same machine?
    3. Have you checked error logs?
    From the problem description you have provided 1st seems to be the main issue.
    - Ashish

  • Server Admin is very slow to respond

    I have a brand new server that I'm doing a fresh install of OSX Snow Leopard on and I'm running into an interesting problem. For some reason, server admin is VERY slow to respond to any service changes... when I first load server admin, it takes 3 minutes to display the services. When I change a service, I get the spinning wheel in the right hand corner of the server admin pane for up to 10 minutes before I can click "save" ("save" is grayed out while the wheel on the server admin pane is spinning).
    I've run OSX server from Tiger through Leopard and have never seen server admin be this slow.

    You didn't need to reinstall.
    I've confirmed this issue. Stop the firewall by launching the Terminal, and run:
    sudo serveradmin stop ipfilter
    Quit Server Admin if it's running (and unresponsive) and wait at least a couple minutes.
    Re-launch SA and disable Stealth Mode for TCP/UDP.
    Please submit a bug-report at
    https://bugreport.apple.com
    _But before you submit, please, be sure to read_:
    http://www.afp548.com/article.php?story=20051102133234150

  • I had used Iphone4 to update to ios 7.0.4(11B554a) but after update whenever I want to create new contact, I can't type in the word because the keypad don't appear, what should I do? Can I uninstall the update of ios 7.0.4?

    I had used Iphone4 to update to ios 7.0.4(11B554a) but after update whenever I want to create new contact, I can't type in the word because the keypad don't appear, what should I do? Can I uninstall the update of ios 7.0.4?

    You cannot uninstall the update. Apple does not support downgrading. What troubleshooting have you done? Start with a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Are you syncing contacts with iCloud?

  • I bought yesterday my macbook pro and I want to join the FaceTime and I just can´t... It said that is not working and try it later... but since yesterday said that .. What should I do?

    I bought yesterday my macbook pro and I want to join the FaceTime and I just can´t... It said that is not working and try it later... but since yesterday said that .. What should I do?

    Here's a previous discussions that seems to have solved a similar issue in the past:
    https://discussions.apple.com/message/12209861#12209861

  • Since upgrading to Yosemite I cannot get directly to Netflix.  I get a message about having to download Microsoft Silverlight.  I can't get that to work and don't want it anyway.  I just want to open Netflix and play the movies.   What should I do?

    Since upgrading to Yosemite I cannot get directly to Netflix.  I get a to Netflix and there is a big message about having to download/install Microsoft Silverlight.  I can't get that to work and don't want it anyway.  I just want to open Netflix and play the movies.   What should I do?

    I can't get that to work and don't want it anyway.
    You need Silverlight. That is the application that plays the Netflix movies.
    http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx

  • I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    Make sure you set the speakers as discoverable, which usually involves holding down a button for a few seconds. Go to System Preferences / Bluetooth and you should be able to add it.

  • Please help troubleshoot why SM-SRE WAAS module can't time sync with NTP server

    I have a remote WAAS site where a SM-SRE-900 module is plugged in a 2945 router. Everything is fine except the module can't sync its time to the NTP server. Its NTP was configured right and it can reach the NTP server with no problem. There's no authentication configured. But somehow it can't associate with the NTP server. I have tried manual NTP sync, but it failed too.
    The same NTP server and config is also used for many other WAAS site and the CM. They are all fine. I'm running WAAS 4.2.3 build 7. The module isn't showing any other alarms.
    Here is some show outputs and the manual NTP sync result. I noticed its poll is only 64 seconds while all other sites are showing 1024 seconds.
    waas1#sh ntp status
    ntp enabled
    ntp authentication disabled
    server list:
    Server           Key
    10.0.0.1         -
         remote           refid      st t when poll reach   delay   offset  jitter
    ==============================================================================
    10.0.0.1        66.96.98.9       3 u   43   64  377   16.828  2359370 2421.24
    waas1#ntp 10.0.0.1
    16 Dec 22:06:20 ntpdate[9835]: bind() fails: Permission denied
    Failed to set software clock using NTP server 10.0.0.1

    What the SRE-900 have as it's time?  Use the show clock command.  Does it match within a few minutes of ntp already, if not, and if this is not the first first clock set out of the box, then ntp sync might fail.
    You might try to manually set the clock correctly (set clock ... something), then see if the ntp server will sync.

  • I need to download a newer version of itunes on my 10 year old mac. I can no longer sync my iphone to my computer itunes without this update. I have tried unsuccessfully 4 times, and have no idea what I am doing wrong. Suggestions anyone?

    Tell me how to download a newer version of itunes on my old mac so i can it will sync to my iphone please.

    Click here, buy and install the DVD, and then run Software Update twice. If you're actually using Mac OS X Server, you'll need to phone the online Apple Store instead of using the link I posted.
    (121225)

  • PRD server is running very slow.. How performance can be improve??

    Hi Experts,
    Here I am getting the problem, my PRD server getting dead slow unexpectedly. Here we are using logon load balancing, appserver is running fine but DB server getting very slow. its only happening for particular time only 15 -20 mins. Please help us to rectify the solution.
    PRD Details:
    SAP ECC 6.0
    MaxDB 7.6
    SLES-10.2
    Transaction Taking too much Time:
    Output of: sappfpar check Pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS00_hostname.check
    AVG dialog response time:
    TOP CPU:
    Buffer:
    OS:
    WP:

    In most typical cases of PRIV sessions and your ST02 screenshot is due to lack of memory on the system.  The red on ST02 means you are swapping, which is not ideal; I can't see the actual numbers but it looks like CUA is in the millions?
    If your system was restarted recently then you need to update that buffer to be larger and lower the amount of swaps.  If you haven't rebooted/restarted the system recently, then you need to review how often the swaps are occurring and adjust to fit your needs.

  • Always-On Node2 Server performace is very slow

    I have two node Always-On Configured (sync & Automatic) SQL serves. Node 1 Performance is very good however as soon as failover happens on Node 2 the performace becomes very slow.
    Both the server configurations are same.What could be the reason for degradation of the performance of the server?
    Thanks!!

    Please have a look at these links:
    2 Reasons Why Failover Could Be Slow
    How to Overcome the Performance Problems with SQL Server AlwaysOn Availability Groups #SQLPASS
    You experience slow synchronization between primary and secondary replicas in SQL Server 2012
    Saeid Hasani [sqldevelop]

  • Crystal Reports Moved from one file server to another - very slow opening

    Hello,
    I am new here, and I am in need of a solution. If I am not in the correct forum, please advise.
    Our crystal reports were moved from an old file server to a new file server.  Once the old file server was shut down the reports opened very slow in Designer and in our 3rd party application.  Our server team determined that the reports are still attempting to connect to the old file server.  If the old file server is brought online or dns is changed to reflect another machine that it can make a connection to, it opens with no delay. 
    For some reason, not every report is affected.  Most of the reports are Crystal 8.5, but I have some Crystal XI reports that do the same thing.  I can't find any reference in the reports to any file server/location....
    I need to resolve this issue on the Crystal 8.5 version due to the application that we are running.
    Is there a way to fix this other than to recreate the reports (I have over 400 of them)?
    Any assistance or advice is appreciated!
    Thanks,
    Nancy

    Hi Nancy,
    The server info still needs to be updated. Are you setting location for each subreport also?
    Possibly this registry key will help, I only have CR 2008 installed so you'll have adjust for what ever you are using:
    HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions - VerifyStoredProceduresOnFirstRefresh = No
    and
    VerifyStoredProceduresOnSetLocation = No
    And
    VerifyWhenDBDriverUpgraded = No
    And
    ViewOutOfPlaceSubreports = No
    Close CR designer before making any changes. And the usual warning about modifying the registry.
    Thank you
    Don

Maybe you are looking for

  • Using Apps on Multiple Devices

    When you buy an app like iPhoto is it avalable on all you ISO devices or must you purchase a copy for each device?

  • WEP password from my iMac G4 flatscreen not support by Time Capsule

    Hello, I've just installed my new Time Capsule (dual band) today in combination with my new MacBook Pro. It all works fine, however I also have an 'old' iMac G4 17" flatscreen and here is the problem: although I use Mac OS X 10.4.11 I can't connect t

  • Code for Panasonic TV

    I have a Panasonic TV and need the code to program my Verizon remote. Does anyone know what that is?

  • Cash Flow Report - Documentation

    Hi, I need the documentation for 'Cash Flow' Report in SAP B1 under Financial reports. Kindly send me the link for the same. Thanks. Sid

  • Using Output types in Custom Reports

    Hello, I have got a requirement to set up two new Outputs which would be used by two different Custom Reports such as Shortage Allocation and Late Shipment notification report,Both these Outputs Both output types need to be linked to the same access