Can't "hairpin" with RV180 Small Biz Router - how to achieve?

We have 2 servers in our LAN set up via One-to-One NAT to accept WAN calls to 2 static IP addresses.  This works fine.
What we cannot do is: access various calendar and web forms on these 2 servers from within our LAN (thought they work fine outside the LAN).  Attempts to call these pages/services from within the LAN directs users to the router's admin login page.
My understanding is that this model does not support "hairpinning" (essentially leaving the LAN and coming back in via the WAN).
What is the best way to achieve seamless access regardless of whether the user is within the LAN or outside of it?

Hi Nathan,
firmware 1.0.2.6 fixed the issue reported by L2.
(reported from case 624799947)
latest is 1.0.3.10
http://software.cisco.com/download/release.html?mdfid=284005904&softwareid=282465789&release=1.0.1.9
Hope this helps,
Dan

Similar Messages

  • Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    It is not possible to do that.
    Allan

  • I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one?

    I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one (when I have no password and the security questions aren't working?)

    You cannot merge Apple ID accounts, that has never been supported.
    You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

  • Can't connect with modem through e2500 router

    I have an old Speedstream 5100 modem hooked to my e2500 router. Everything works well except if for some reason my modem disconnects from ISP I can not log into it through the route to reconnect it. I must plug a direct cable into modem from computer run connect script then plug modem back into router all is fine again.
    Any ideas why connecting to modem through router is blocked?
    Thnaks,
    Al
    Solved!
    Go to Solution.

    al_mathews wrote:
    My Speedstream only has one Ethernet connection so I didn't realize that it looked like a router to the local network. I changed the mode to bridge on the Speedstream and setup PPoE on e2500 and reconnected to ISP on e2500 setup screen. That may solve the problem of reconnecting since now it is managed on the e2500.
    One thing I now see is since I left the modem IP set to 192.168.0.X I can't get to it at all through the e2500. Is that because my DHCP in e2500 is setup with 192.168.1.X IP range so modem isn't addressed in my network? If I hook directly to Speedstream and change IP to 192.168.1.X will it become visible on local network?
    You cannot access the modem anymore while you have an active PPPoE connection. For PPPoE the E2500 won't need an IP address from the modem thus it doesn't do DHCP on the WAN port and thus it never sees it. When you try to access 192.168.0.* addresses the E2500 will route it through the PPP tunnel to the ISP.
    If you hook your computer directly to the SpeedStream it should automatically pick up a DHCP address (assuming the computer is still running on DHCP and not with a static IP and the SpeedStream does not automatically disable the DHCP server in bridge mode). If you have set up a static IP on the computer you have to change the IP address to a 192.168.0.* address.

  • Who is the Imbecile incharged of Fox 5, who created it incompatible with gooble toolbar? I have over 50 bookmarks in my google toolbar that I can not access with my Mac desktop. How do I get the Old firefox. Otherwise I am going somewhere else.

    Who is the imbecile that is in charged of Firefox 5, who created it incompatible with Google's toolbar . I have over 50 bookmarks t I can not access. How do I get the old Firefox toolbar that is compatible with Google's toolbar.

    Who is the imbecile that is in charged of Firefox 5, who created it incompatible with Google's toolbar . I have over 50 bookmarks t I can not access. How do I get the old Firefox toolbar that is compatible with Google's toolbar.

  • I lost my iPhone 5s and purchased a new phone.  A few days later I found the first phone.  What can I do with the old 5s?  How can I upgrade to a 6?

    What do I do with the old phone and can I get an upgrade?
    Thanks
    Pete

    You're gonna have to figure out how to call AppleCare & ask to talk to "Account Security". If your english is not good, then find someone to help you. Be prepared to prove ownership & the fact that you purchased this phone from an authorized source in the US. They "may" be able to help you.
    Apple does not provide email support.

  • HT204266 Hi my iPad can not contact with App Store ! Please how I can refresh the App Store application in other words to un install and then install it again

    Why my iPad cannot connect to app store

    The App Store app is a built-in app, it can't be deleted.
    What have you tried to fix it ? If you haven't already done so then you could try the following :
    - log out of your account (tap on it in Settings > iTunes & App Store) and then log back in
    - close the App Store app via the iPad's multitasking bar and see if it works when you re-open it : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    - a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Books created by iBooks Author. It can be used with the iPhone.'s How.

    I'm not good at English.

    No, it's not possible.  For the iPhone you must have .epub format.  The apple app for making that is Pages.

  • Airport Express with Belkin N1 Wireless Router

    I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
    Preferred setup is
    DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
    Can anyone advise
    1. Can Airport work with Belkin N1 Wireless Router?
    2. How do i setup the above configuration?
    If this can work, I'm going to get one immediately!! =D

    Welcome to the discussions, Richard!
    Preferred setup is
    DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
    The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
    So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

  • How do I install Tiger with a smaller footprint??

    I seem to run into a problem with re-installing Tiger on my Mac Mini Core Duo 1.66 with a 60GB drive. It says I only have 39.7GB free so how can I install with a smaller footprint without all of the applications that I don't need??

    Hi Dougled, Welcome to Apple's Users Help Users Forums.
    With over 50% free, space is not the cause of your problem. You can safely delete, do a custom install without, unneeded printers and foreign languages. Don't mess with Fonts unless you are sure of yourself.
    A forum search on "install 10.4." will give you lots of suggestions.
    Good Luck, JP

  • My company uses Creative Cloud subscription (Photoshop CC 2014) for one of its photographers and wishes to add another user/install with the same IT account, how can we sign up another user?

    Essentially can we add another user to the existing account and add the new payment for the yearly subscription, I seem to have seen somewhere on your account site(cant remember its not very intuitive) that 2-3 systems can log in with the same credentials.
    How can we set this up without enrolling with yet another email ID, etc.?
    Thanks!

    You can cancel the individual CC & opt for CC for team in which number of seats can be purchased.
    What’s the Difference Between Adobe CC for Teams vs. Individuals? | ProDesignTools
    Creative cloud team vs individual membership
    http://helpx.adobe.com/in/creative-cloud/creative-cloud-teams.html
    Regards
    Rajshree

  • Can't communicate with youtube

    So the apple TV for me has been working pretty well, no problems really. About 2-3 days back, suddenly I start getting an error every time I try to use YOUTUBE. It keeps saying the apple TV can't communicate with YOUTUBE. Anyone know how to fix this?

    Hi, LPUAdit.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are unable to connect to YouTube on your Apple TV.  Here are some troubleshooting steps that may help resolve this issue.  
    Resolve network or streaming issues
    Troubleshoot Wi-Fi networks and connections.
    Switch between wired and wireless networks.
    Learn how to resolve issues streaming content from third-party content providers. Learn more about third-party content providers.
    Apple TV: Basic troubleshooting
    Cheers, 
    Jason H.  

  • How far can i go with spiceworks helpdesk ticketing system?

    No satisfaction form.  You can ask the user to comment on the ticket about the experience before closing it.
    There are plugins and scripts that can enhance or modify different aspects of the system.  Just not on the grand scale you are envisioning.

    hey,
    i have installed spiceworks helpdesk on my network and created a custom but simple form for users to fill when they need any technical support. and i have also activated the email notification (integrating with exchange server)
    but my question is, how far can i go with this helpdesk system? how well and pro can i go with it? can i let the end user submit some kind of a satisfaction form after the technical guy finishes the support? how well can i enhance all both end user and admin experiences with this tool?
    This topic first appeared in the Spiceworks Community

  • I am trying to export a Pages document to a pdf, and a tiny black rectangle with a small white circle keeps showing up. I can't seem to delete it in my pages document. help!

    I am using Pages, 5.2.2., on a MacBook Air, system 10.9.5., and I have a formatting question. I am making a small brochure, and it seems like in some places for reasons unknown, when I have a return, there's a small black-filled rectangle, about the size of one letter, with a small white circle inside of it appearing. I want to get rid of that little symbol. I keep trying to press delete, but then I lose my return/spacing. (Can you tell I'm a brute beginner?) Help! And thanks!

    It sounds like you are using a Chinese font.
    Use something else eg Times or Helvetica or any European font.
    If the character disappears, its the font.
    Peter

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

Maybe you are looking for

  • Values not getting displayed for members which doesnt have parents

    Hi I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient. The values for members which doesnt have parents are getting displayed in the view created for the measures which are d

  • Import and Burn CD Ding When Complete

    How do I turn off the 'ding' notifier in iTunes when an import or cd burn is complete? I can't find how to do this and when I went to the Apple store, the guy at the 'Genius Bar' had no answer. I appreciate any help.

  • Trying to backup iPhone 3GS to switch to 4S

    I initially tried to transfer purchases and it kept freezing at the first app.  So, I thought I would just go straight for the back up.  The first part of the back up worked but then froze again, when it started trying to transfer apps. I have the ne

  • Impermissible Passwords and password generate

    Hallo. I need to avoid that in the portal password there are special characters. So I put in the Impermissible Passwords: :,!,",@,$,%,&,/,(,),=,',`,+,~,#,-,_,.,;,:,{,[,],},\,<,>,* ,|* The problem : I go in the "User administration"->"Identity managem

  • Jdev 11g: JBO-30019: An unavailable cookie state

    Hi All, I am using Jdeveloper 11.1.1.4.0. We are getting following error frequently in our logs. Haven't got any usefull input after searching OTN/Oracle Support. Can anyone please provide some input: oracle.jbo.common.ampool.ApplicationPoolException