Can't have more than two people on the internet.

For some reason, for the past week or so, my internet has had a major speed issue meaning it has dropped from an average of 800KBS per second to 500KBS a second therefore meaning that when two people are on the internet I struggle to play online games on my PC. And before anyone asks, yes I've already done a speed test when it used to be 7mbs now it's 4mbs (even though speed tests are inaccurate due to it shooting up to that speed for a millisecond without it being constant) and yes I've tried ethernet and still slow and unreliable speeds. I'm stick to death of dealing with terrible speed decreases every so often in my area. Does anyone have any suggestions as it what could be the problem?

I am using HH3, here are my ADSL stats:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
5 days, 05:38:07
Downstream:
5.844 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
15.6 dB / 27.0 dB
Line attenuation (Down/Up):
42.4 dB / 23.0 dB
Output power (Down/Up):
20.7 dBm / 12.6 dBm
FEC Events (Down/Up):
7266461 / 187
CRC Events (Down/Up):
93 / 2
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
929 / 3
Error Seconds (Local/Remote):
1159 / 466
And here is my speed test:

Similar Messages

  • HT204380 Can you have more than two people on one facetime call at a time?

    Can you have more than two ipad/iphones on one facetime call at a time?

    Sure, you have have more than one person using each device
    But, only two devices can connect using Facetime.

  • Can I have more than 1 susbcriber with the same email address?

    I have developed a BC secure zone in Muse as a members only area. This works fine. I have subscribed all the members and all is OK except that I find if I try to subscribe 2 members with the same email address (e.g. a married couple with a shared email address), the first subscription is overwritten by the second. Is there a solution or do I just live with it?

    Hi Neil,
    This is the default behavior of the system because email is the unique identifier. You can't have more than 1 subscriber with the same email address.
    Regards,
    Aish

  • Can we have more than One DC for the sales organization and Plant combo?

    Can we have more than One DC for the sales organization and Plant combination?
    If yes can you please site a practical example to clear the picture

    Hi
    First of all in SAP sales orgs are assigned to distribution channels and the combination of sales org and distribution channel which is called distribution chain is assigned to plant
    There is  no direct link  between sales org  and plant or distribution channel and plant
    So  sales org  and plant combination doesnot exists and
    it is only sales org and dist channel combination which is  called as distribution chain only exists
    Nowhere in SAP we are assigning sales org to plant
    It is because sales org alone doesnot make sense and its combination with dist channel only makes sense
    because sales org is a selling org and the distribution channel is the route to sell and this combination has only to pick the material from plant to process sales to customers
    The relation between sales org and distribution channels is many to many and also vice versa
    Multiple sales orgs can be assigned to one distribution channel and
    Multiple distribution channels  can be assigned to one sales org
    Similarly the relation ship between Distribution chain (sales org+dist channel) to plant is also many to many and vice versa
    Similarly plants from other company codes can also be assigned to Distribution chain to facilitate intercompany processes
    In whatever way look at it the multiple distribution channels can be fit anywhere
    Regards
    Raja

  • Can you have more than one user on the new ipad?

    Can you have more than one user on the new ipad?

    You cannot set up more than one user account on the iPad if that is what you mean.
    Obviously families will share an iPad, but they are really meant to be single user devices with one Apple ID only on the iPad. Multiple ID's on one iPad can become a bit of a hassle to deal with.
    There is no way to lock apps or email accounts so that can become an issue as well. If you use the built in mail app for email, whoever is using the iPad can read your email.

  • Line Graph - can I have more than two levels?

    Post Author: Deepa
    CA Forum: Charts and Graphs
    I am working on a line Graph for a client where the client needs the x-axis to show year, then month by Office for expenses. Crystal Reports XI. I can have two levels when I do change of by Transaction month and offices. Is there any way I can have change of Transaction Year, Transaction Month and then Offices? Any help is appreciated. Thank you. Deepa

    Hi,
    Yes,  Disabling the DHCP proxy on WLC and us IP helpers on LAN switch is a option to have more than two DHCP servers.

  • Can you have more than one ipod on the same computer?

    me and my sister live together and we would like to be able to have two seperate libraries on the same computer. one library is already there and when the second ipod is plugged in, it comes up as a sub-library that is unacessable.

    There are basically two ways of using multiple iPods on a computer and these involve:
    a) Sharing a single iTunes library and or user account or
    b) Creating multiple user accounts.
    Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
    Sharing a Library and/or User Account
    If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
    Loading songs onto iPod automatically - Windows
    Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes
    Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
    Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page: Loading songs onto iPod shuffle - Windows
    It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
    Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library:
    Using multiple iTunes libraries -Windows
    Separate User Accounts
    Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
    I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here:
    Using Windows XP User Accounts

  • Can you have more than one account on the ipad?

    I'm looking into using the ipad in our manufacturing facility, with more than one user on a single ipad.
    Can you have multiple user accounts on it, and if not how would you set up email with multiple accounts where one user can't access another's account?
    Any info would be appreciated.
    Thanks.

    Welcome to Apple Support Communities.
    If each employee uses a web-based email system such as Gmail, Hotmail, Yahoo, and others, and makes a point of NOT automatically saving ID and password, each user would use the Safari browser to access email, privately and confidentially. That also allows viewing email folders created in the webmail account that are not visible in the Mail app using a pop mail server.

  • Can you have more than 8 thumbnails in the latest version?

    Installed 33.0.1 & now can only have 2 rows & 4 columns of favorite sites. Multiple tabs was the reason I use firefox. Are they going to fix this or how do I go back to an older version. Had a look at the older version site but couldn't understand all of the folder options or how to instal it. It's ruined my week seriously. Thanks.

    Yes, if your monitor is the size of a TV.
    In Firefox 33 the size of the tiles on the new Tab page was made larger, and to a fixed size. You have to zoom out to see more tiles.
    Best solution seems to be using the New Tabs Tools extension.
    https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

  • Can you have more than one iphone on the same itunes account

    My friends wife has just brought an iphone 5 and given his old one to her husband. They both use the same itunes account because they only have one computer. The husband has gone onto the new phone with his sim card started deleting stuff and it is deleting it from the iphone 5. They are on the same icloud account im guessing. Can they have the same itunes login in so they can have the music on both phones but a different icloud login to stop deleting stuff from each others phones?

    iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

  • In Acrobat XI, how can we have more than 2 people digitally sign a document or template?.

    The document is a PDF template with 2 signature fields for approval. When the first person digital signs the document it shows the GREEN tick that it's signed and all signatures are valid. Then it gets emailed for the second person to digitally sign and ofcourse, the document becomes invalid. (We don't want to use the echoSign cloud service and there is no Acrobat server setup). Can someone share the light please?

    A PDF Form Template will try an execute an action to create a new page based on the template page.  This action will break the first signature because it changes the document by adding a new page after it has been signed.  Is it imperative that the document be a PDF Form Template?   If all that is called for is two signatures then create the document with two signature fields and without it being a PDF Form Template.

  • Can we have more than one attachement to the "Email with Attachment" activity

    Guys,
    I have a requirement  in which the process has n number of approvers in the flow, and each  approver can add attachments to the form in the list<document>  variable which carries the attahced documents.
    At the end of the process i am supposed to send a email with all the attached files to a help desk team.
    I know that the Email with attachment activity supports one attachment. is there any posibility or other  activity that i can use to send an email with any number of attachments?

    Hi Ashok
    The service you want is called "Send with Map of Attachments". This service is not on the toolbar.
    If you drag on the Define Activity step and type "email" in the Find box you will see under Foundation that there are 3 email services.
    Choose Send with Map of Attachments.
    For help on this service see: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000570.html
    Diana

  • Can I have more than one library for the same ipod nano?

    I have a desktop pc that I have originally setup my nano on. I have about 400 songs on that computer. I have about 500 other songs on my laptop, can I put itunes on to both computers and have them add the songs from each one respectively without erasing the other? and if so, how?

    Type 61675 into the search bar under the support tab on this website. "How to use ipod with multiple computers"
    Basically, you have to change your preferences to manually manage instead of automatically update.

  • How can I compare more than two VIs at a same time in labview 2009

    How can I compare more than two VIs at the same time. I am an Lab Engineer I have to check assignments submitted by students and I want to know how many of them are copied from each other. Labview compare VI can only compare two VI at a time while I want to check about 30 VIs at same time.
    Regards,

    I'm not aware of a tool to compare multiple VIs.  If you don't find anything, consider posting this to the LabVIEW Idea Exchange to expose this idea directly to NI R&D.
    Thanks!
    - Greg J

  • Can we have more than 2 "and/or" conditions in filters in advanced mode in power view?

    Hi,
    I need to check 3 conditions in filter in advanced mode in power view. Is it possible out-of-box. Can we customize the advanced mode filters or do we have some configurable options for same.
    Thanks,
    Bhawna.

    Hi Bhawna,
    I'm the Dev Owner for the filtering experience in Power View.  Sorry it took so long for me to reply.
    In the Power View Advanced Filter cards, you cannot currently add more than two conditions.  What Rhys meant about having as many AND filter conditions as you like is that because all of the filter cards are AND-ed together, you can effectively have
    more than two filter conditions by adding multiple 'LastModifiedDate' cards.
    Unfortunately this won't help you if you're looking to OR more than two conditions.
    Adding the ability to have more than two conditions in a single Advanced Filter card is something that is near and dear to my heart, but it does open questions of nesting and grouping which would need to be addressed first in order to be able to offer a
    complete solution.
    Hope this helps,
    Jeremy

Maybe you are looking for