Can't hear any audio off of my iPod

I have a 30GB iPod classic, and for the last year or so I've noticed the audio has started to go. First I was using just the standard provided headphones, and the audio went out in one earbud. I've replaced the headphones several times, but to my dismay, the headphones are obviously not the problem. I can still view everything on my iPod, I know the volume is turned up, but now, I can't get a single sound out of my iPod. I don't have a dock, so I haven't tried that yet, but I'd like to hear something out of my headphones.

Would have been nice if you had access to a dock port to test out the sound card.
Try [*_RESETTING and/or RESTORING*|http://www.apple.com/support/ipod/fivers/classic/#] your iPod Classic. (Keep in mind that RESTORING will return your iPod to original factory settings and will erase all your data and you will need to re-install via iTunes).
If that doesn't work then you can try cleaning out the headphone jack with an object smaller than equivalent to the size of the headphone plug. If that doesn't work then I your headphone jack assembly has failed and will need repair.
Axel F.

Similar Messages

Im having issues with the audio on my phone, I can't hear any audio i.e music or video unless I have the headphone installed.

Im having issues with the audio on my Iphone 4s, I can't hear any audio i.e music or video unless I have the headphone installed. Any clues the problem or how to correct?

1. http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
2. System Preferences > Flash > Advanced > Delete All
3. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Quit Safari.
    Restart computer. Relaunch Safari.

I can't hear any audio in imported clips!

The video clips were originally MPEG, then I converted them to MOV (at least I think) in QuickTime Pro. When I imported the movies into iMovie, I can't hear any audio. Please help! Thanks so much.

The video clips were originally MPEG, then I converted them to MOV (at least I think) in QuickTime Pro. When I imported the movies into iMovie, I can't hear any audio.
If the source files were "muxed" (MPEG-1, MPEG-2, VOB, etc.), then this is normal. QT applications (like QT Pro, iTunes, iMovie '06, GarageBand, etc.) cannot convert "muxed" formats and retain audio. In this case use an MPEG-based, third-party utility like MPEG Streamclip (free), FFmpegX (donation-ware), Visual Hub (pay-ware), etc. for your conversions. (NOTE: MPEG Streamclip requires the QT MPEG-2 Playback component be installed for the conversion of MPEG-2 content.)

Recorded videos and I can't hear any audio. Is the audio there and I cant hear it, or didn't get picked up at all?

The other night I went to a concert and tried to record some videos on my iPhone 4. When I came home and watched them, there was no sound! So I tried everything from making sure it wasn't on silent, bluetooth was off, restarted it, tried opening it in a media player, and nothing. I even uploaded them to a computer and no sound. Then I tried to record a test video and when I did that, my audio was fine. Did I do something wrong when recording at the concert? And was the audio not picked up and I have nothing or is it there and I just can't hear it? Theres no buzzing noise or slight nosie, just completely silent.

You should have gotten a user manual. If the manual is of no help, contact the manufacturer.

Netflix LA - I can't hear spanish audio in some movies

Since the last update, days ago, I can't hear the Spanish language in some of the Netflix Latin America movies, but if I play the same movie from a computer, I can hear the audio in Spanish.
This is a problem with the last firmware of AppleTV.
Please help me.

The video clips were originally MPEG, then I converted them to MOV (at least I think) in QuickTime Pro. When I imported the movies into iMovie, I can't hear any audio.
If the source files were "muxed" (MPEG-1, MPEG-2, VOB, etc.), then this is normal. QT applications (like QT Pro, iTunes, iMovie '06, GarageBand, etc.) cannot convert "muxed" formats and retain audio. In this case use an MPEG-based, third-party utility like MPEG Streamclip (free), FFmpegX (donation-ware), Visual Hub (pay-ware), etc. for your conversions. (NOTE: MPEG Streamclip requires the QT MPEG-2 Playback component be installed for the conversion of MPEG-2 content.)

I am editing a clip but it won't show in the screen, I can only hear the audio. any suggestion?

I am editing a clip but it won't show in the screen, I can only hear the audio. any suggestion? The clip is visible in the timeline but when I play it I can only hear the audio and no images.

Hey, I'm having the exact same problem.
I just got my Macbook Pro and I tried to partition/install windows xp the first day I got it. After successfully partitioning my HD, the 50GB partition didn't show up while trying to install the windows platform.
To be a bit more specific, it doesn't even show up in my startup disk in the system preferences menu (if that's any help?)
So after about a week of abandoning my Macbook and going back to my PC I went to the Apple store and someone from the genius bar just told me to reformat the entire thing...so that's what I did and I'm still having the same problem.
Any advice Lyssa?

I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks

I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks

I am sorry to hear. Yes it's very disappointing and the fact that you can't at least re-download your purchase makes it that much more irritating haha well thank you and good luck!

Can only hear 1 audio track?

I,m new to Elements 10 and have just started editing. I just dragged a clip onto my timeline but can only hear one audio channel. I know there are two tracks, how can I mix both through?
thanks. Darrell

Hi Steve, thanks for your help. but this has really got me beat. When I play the track straight off my computer I hear all audio tracks. But then I “get media” bring the clip in and listen off the elements timeline – I only hear track one???
So my computer must be fine?
When you say “Can I see both right and left channel in the wave form? Its hard to tell – am I meant to be looking at the “green strip “ on the timeline? Its so very small. - I see a yellow line and a grey line underneath? what am I looking at. Its very frustrating because I am trying to edit a friends concert and the music is on track one – but the atmos and applause is on the other 3 tracks – but all I can hear is the music
any suggestions?
cheers mate
Darrell Brown
0418-954-858
[email protected]

What happen to my ipad? I can't hear any music without headphone

What happen to my ipad? I can't hear any music without headphone even volume button also not working if headphone is not join with ipad.

Hey there Glissen11,
It sounds like you are not getting audio when you connect your headphones to your iPod Classic. I would use the troubleshooting steps in the following article named:
iPod classic Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/classic/
Step one is to reset your iPod, and here it is to get you started. There are additional troubleshooting steps if needed in the article as well:
To reset your iPod:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Tip:
If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
Thank you for using Apple Support Communities.
Regards,
Sterling

HT201401 I can't hear any sounds from my iPhone 4s speakers

I can't hear any sounds from my iPhone 4s speakers.
I have checked my side button and checked my sound settings all seams to be fine
I have also tried switching off and on still not working
I have also reset my all settings but still can't Hear any sound from my speakers
All app and music sounds are also not working
please help

Have you "reset" the device? http://support.apple.com/kb/HT1430..I'd also stop all of the apps with the double-tap-on-the-home-button method.

My iMovie is skipping like crazy when I try to edit and then goes to a black screen and you can only hear the audio!?!? What's happening??

I use iMovie almost everyday for Youtube videos. I have nothing in my imovie except the 5 clips that I'm editing now. I have all my media on an external hard drive and delete everything after I'm done with ( I empty all trash cans). My iMovie is now skipping when I try to edit and then the clips just go to a black screen and I can only hear the audio, this has been going on for a week and I don't know what to do?!? Any help?

Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller
-- Those links are currently down for maintenance but should available shortly.

I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up

I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

HT1430 when i make a call the loudspeker sign atou on then can't heare any voice.

Need help
When i make a call my phone's loudspeker sign automatic on and can't heare any voice from either end. If loudspeker off also same problem.
I already restart my phone but not solved,bolium adjusted and speker in good condition. only problem when making voice call.
Thans
Misbah

Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen

I can't get any audio recording to work in Logic X.

I got a new Imac, an Apogee duet and Logic X.
I just got Logic X and I really love everything about it accept I can't record any audio recordings on it.
I can use my old Logic and garageband files and play around and mix them with no problem. The midi works fine as well coming trhoug my headphones and monitors.
Somehow I can't get the Audio to be heard or recorded. Which is a real bummer since I got only 6 songs left on my new album and it is an acoustic album. I bought Logic so I could master the first 5 and the record the last 6. But I'm stuck with garageband at the moment. Because that actually can record the audio throug my duett with no problem. Then I open the songs up in Logic and master and mix them..
Ay ideas?

If you can record and hear audio in Garageband, it must be down to something in Logic - have you checked the Audio tab in Logic's Preferences and selected your Duet as Output and Input device ?

ITunes : I can't hear any voice when I play videos, can you?

I'm currently using iTunes as a song/movie/video player.
When I play songs, it seems fine n' the sound is good.
But it doesn't seem so with the videos.
I can't hear any voice coming out when I play movie or video files.
But I can hear it perfectly when I play them in my iPod!?
Every movie and video files are converted to '.mp4'
Is this has anything to do with my problem?
I don't know what's wrong with my iTunes
Any ideas?
Thanks'' :):)
iPod Video Windows XP

hiya!
I can't hear any voice coming out when I play movie or video files.
But I can hear it perfectly when I play them in my iPod!?
hmmmm. okay, let's first try a careful standalone QT 7.0.4 reinstall.
download and save a copy of the QT 7.0.4 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.0.4 Standalone Installer
if that install goes through okay, do you get sound with your videos?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Can't hear any audio off of my iPod

Similar Messages

Maybe you are looking for