Can't hear audio on FCPX except thru earphones; audio does not export.

Clips have audio through my headphones, but not otherwise (no problem with audio in other programs).
Sometimes I can hear bits of audio when I scrub, but it's inconsistent.
Exported video also has no audio.
I'm on a very new Mac Mini running Lion OSX 10.7.4.
No, the headphones are not still plugged in while I'm trying to hear it normally.
Thanks for any advice...
Tisha

Sys prefs Sound -> Output -> Internal Speakers... Built-in // Settings for selected device: The selected device has no output controls // Output volume: (slider)
When headphones in, Sys prefs Sound -> Output -> Headphones ... Headphone port // Settings for the selected device: Balance: (slider left-right) // Output volume: (slider)
Channel configs:
Media specs: Apple HDV 1080i60, 1440 x 1080, 16-bit integer (Big Endian), Stereo (L R), 48.000kHz
- Tisha

Similar Messages

Purchased a TV show in itunes...can only hear audio, will not display video

at 1st....
Purchased a TV show in itunes...can only hear audio, will not display video
now...
shows the show is 48 min but then is only 30 seconds once opened

Hello piff316,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

Audio Does not export with ideo in quicktime conversion

I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
is there a way i can reset all settings without adjusting my video clips?
Sound settings
Format: Lubear OCM
Channels: Stereo (L R)
Rate: 48.0000 hHz
Render Settings:
Quality: Normal
Linear PCM Settings:
Sample Size: 16 bits
Checked: Little Endian

Hi(Bonjour)!
Does the audio play when you run sequence?
Did you toggle off the monitor icon at the left side of timeline for audio track?
When export to quicktime conversion, select quicktime movie and click OPTION.
From this point, you should see a checkbox for SOUND. Be sure to check it ON.
Michel Boissonneault

Using GB'08 to create Chapters for iMovie'08 -- audio does not export

After fighting though learning Final Cut Express (oops I mean iMovie '08), I got a movie together. Then I wanted chapters, so I found a great article (http://imovie08.blogspot.com/2007/08/how-to-add-chapter-markers.html) showing that the only way to make them in a logical way was via GarageBand'08.
However, when I send the movie to iDVD, the audio does not make it (silent when I play the movie - either in preview mode or on the burned disc). Furthermore, I tried to "Export Movie to Disk" to see if GB was not outputting or if it was an iDVD issue of receiving. I found that the export also came over with no audio.
Please advise!

I am having the same exact problem. I have Final Cut Pro on my production computer at work, but I wanted to do some personal stuff at home on my MB Pro. I have like 15 old family 8mm home videos that I want to convert to DVD's for my parents for Christmas, so I used some of my hardware for A to D conversion to get these marathon 2 hour movies on my ext. Hard Drive. But of course you can't make chapter markers in the new iMovie '08, so I have to export to "media browser" and then switch to GarageBand to do this simple task. But unfortunately when I "share" from GarageBand to iDVD, disk, or even iTunes I get absolutely no audio. Ridiculous.
Not to mention the fact that these home videos are two hours long and it takes a freakin hour for it to compress/export just to find out there's an issue. And even before I realized there was no audio, I was having an amazingly awesome time in iDVD as it was lagging so badly that I considered putting my TV on to pass the time while I clicked and held on one of the folders waiting for it to highlight so I could move it. Then it was great to find out that all that time I spent in iDVD was in vain because there was no audio on the movies anyways!!!! yaaayyyy!!!
Obviously other people have presented this same GarageBand movie sharing audio issue and have received no good solutions as of yet, so I don't even know why I'm here posting this. It's 4:00 AM, and I've been fussing with this crap for over 8 hours now. I'm just going to do it all at work on more capable software (Final Cut, DVD Studio).
I just figured that I didn't have to do anything special to these home-videos editing-wise, why not just take advantage of my "cool" new iLife software? And do it on my spare time at home? Why not? Because they've made iLife so retard-proof that it's self destructing before my very tired eyes.
iLife? more like cryLife.

FCPX clip audio does not export, "Jingles" do.

When exporting my project from FCPX to Quicktime, the audio from my clips does not import but the jingles I used from the FCP media library do export.
I get "Quicktime error: -50"
I do have the audio portions of the clips overlapping each other. Maybe this is why?
Could it be an issue of permissions? I ran disk permissions.
Thanks,
Grace

Sys prefs Sound -> Output -> Internal Speakers... Built-in // Settings for selected device: The selected device has no output controls // Output volume: (slider)
When headphones in, Sys prefs Sound -> Output -> Headphones ... Headphone port // Settings for the selected device: Balance: (slider left-right) // Output volume: (slider)
Channel configs:
Media specs: Apple HDV 1080i60, 1440 x 1080, 16-bit integer (Big Endian), Stereo (L R), 48.000kHz
- Tisha

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

Can't hear audio in mac PE 9

I can't hear audio in my sceneline or timeline when playing clips. Makes it really hard to edit!
i capture video/audio from my mini-dv sony cam or from vhs through firewire gadget...
i added an m4v file to the project, couldn't hear audio either
the audio is there, because if i just trim off the ends and create a dvd it has audio....
The problem is on my mac mini... i installed it on my i7 laptop and audio works just fine.
i've checked all the audio settings on both machines and they are the same.
both have vlc and perian installed
just installed the 9.01 patch... no change
does anyone know what might be causing this?
thanks

I've tried changing those to all possible combinations.... System Default, Built-in Output, etc. nothing helps.
on the mini, if you have speakers plugged in, it shows "headphones" as the only output option
i notice in the "audio output mapping" it shows headphones 1 and headphones 2
that seems strange as there is only one set of headphones
i checked my laptop settings ...there was nothing selected on my laptop in audio output mapping
"nothing selected" was not an option on the mini... so i renamed my prefs file and started PE again
then i had nothing selected in the audio output mapping... but it still didn't work
i forgot to mention something.... if i click on the slider/trim thing, and just hold down the arrows on the keyboard to advance the video, it advances at super slow motion and i DO get audio... so i think i have preferences set right.
any other ideas?

Asf file - can only hear audio, no video...

i have been given an asf video and have downloaded flip4mac but can only hear audio of iot, no video...
any idea ?
thanks a lot in advance

Some Windows Media formats are not supported on Mac's.
Check the http://flip4mac.com Site for more answers.

HT1386 Syncing works but can't hear audio with headphones.

Syncing works but can't hear audio with headphones. Works without headphones though.

Have you tried other headphones?
What does syncing have to do with the problem?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

When I enter video in timeline, does not show on monitor. when I play video, can only hear audio.

So within the past couple of days, when I load video into the timeline it does not come up on screen. When I play video, I can only hear audio. If I click on monitor, I get still frame of video. Also received window saying we have detected an incompatible display driver. Not sure why this has happened all of a sudden....

1Communicator
Does your Premiere Elements 10 run on a computer with a NVIDIA GeForce video card? If so, which specific NVIDIA GeForce card? If your computer is not using a NVIDIA GeForce video card, then that Announcement at the topic of the forum does not apply to you. This particular issue is specific for Premiere Elements 10 NVIDIA GeForce.
If all that did apply to you, what version of the driver did you roll back to?
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
If you do not have a NVIDIA Ge Force video card, something else, and you have only one video card, then try deleting the BadDrivers.txt file. In your Windows 7 64 bit, the path to it should be
Local Disk C
Program Data
Adobe
Premiere Elements
10.0
and in the 10.0 Folder is the BadDrivers.txt file that you delete. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
Please let us know the outcome.
Thank you.
ATR

I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up

I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

Audio does not fit with video FCPX 10.1.3

Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
Thanks

I tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
It is difficult to explain

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Can't hear audio on FCPX except thru earphones; audio does not export.

Similar Messages

Maybe you are looking for