Can't hear audioo

I can't hear any audio on my Quicktime videos, or any audio from streaming videos. However, iTunes and such works fine. Help!

Open the Audi MIDI Setup app (in your Utilities folder).
Set the default audio output to 44100Hz and try the files again.

Similar Messages

  • Can't hear audio in trim mode.

    When I'm in trim mode and I play, in order to move the cut, I can't hear any audio.  It has nothing to do with scrubbing on/of because pressing shift+s has no effect.  It's also not working when I'm holding down "K" and pressing "L" simultaneously.
    DrL

    works for me.  Have you looked in the view menu to make sure audio scrubbing is checked?  It's possible you've reset the keyboard shortcut or your keyboard has somehow or other gotten corrupted.  You might try deleting your fcp preferences.  Use this:
    http://www.digitalrebellion.com/prefman/

  • IPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them

    iPhone 5S: does anybody has this problem. During a successful voice call all of a sudden people can't hear me while I can hear them. Signal is strong and call quality (me hearing the other) is still very good but it looks as if I’m going on mute while I’m not muting my iPhone. When dropping the call and re-dialing it works fine again. It’s a brand new iPhone 5S but it now happened already 4 or 5 times in 2 days.
    It feels like a hardware/iOS problem and not a network issue. It happend with iOS7.03 but I just see 7.0.4 is available so will install that one now.
    Thanks in advance for feedback
    Best regards,
    Marco

    Hello Jeff,
    Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone.  I would be concerned too if the audio on my iPhone was not working unless using speaker phone.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speaker
    http://support.apple.com/kb/TS1630
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can't hear recorded sound during video playback

    I take a lot of videos of my kids.  I have noticed lately that the volume is low or muffled...you can't hear what is being said even if they are screaming 6 inches away.  I thought maybe something had gotten into the microphone, etc.  I recorded a voice memo and on playback i could hear what was recorded just fine at a normal level. Now once I tried to record a video of my kids talking, it played back so low that i can't hear anything and that is with the volume turned wide open.  Not really sure what this issue could be but if the volume works fine on voice memo wouldn't it work the same on video playback? 

    Hi there AmPriSi,
    It sounds like you may be experiencing a microphone issue with your iPhone. Use the following article to help you address this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • IPhone 6 - people can't hear me; garbled; breaking up

    Has anyone else had problems with the iPhone 6, where people on the other end can't hear you?  They say I'm garbled and breaking up.  I can hear them fine.  Love everything about the iPhone 6 EXCEPT using it as a PHONE!!!

    Hi has anybody had any resolution to this problem? I've already swapped out my new iPhone 6 for a new one due to people not being able to hear me (breaking up, garbled) when I use the phone in my house. The new phone is doing the same thing! So frustrating. Was on with support for 2 hours yesterday trying everything. We did the ATT carrier update and it seemed the issue was fixed. Very next phone call the call started out fine then after one minute the caller was telling me they couldn't hear me that I was breaking up. So annoying. Others in my house have iphone 4 & 5 and they work perfectly fine only the 6 has this issue.

  • Iphone 5s - siri can not hear me

    I Have troubles with Siri and the keyboard microphone. Siri can not hear me and it is not possible to dictate any text via the keyboard. Both functions are working fine when I use a external headphone with microphone. The voice memo app is working correctly, so I don't think it is a hardware problem. I checked all siri settings and they seem okay. Voice feedback is not on handsfree but on always. Does anybody know how to fix this problem? I have the feeling the iPhone isfor these functions expecting audio input from annexternal source in stead of the build in microphones. Does anybody have an idea to solve this problem?

    Well, that's a new comman issue comes up with IOS 8.3 version. Before 8.3 IOS version Siri were only available in some languages, however, after 8.3 release many languages are supported.
    Even if you enable Siri > General > Settings.. still respond your voice.
    No need to try to troubleshooting device - it will not solve your problem. You have to restore your iPhone and then setup as a new device. That's solution.
    May I ask you to tell me if you siri in English ?

  • My speaker on my iPhone 4s stopped working. I can't hear my phone ringing, music, apps or use the speaker when having a call.  I can still make and take calls when I see them calling but can't hear the phone ring.

    This afternoon my speaker on my phone stopped working. I can not hear it ringing when someone call, but if I see someone calling and I answer the call they can hear me and I can hear them fine. I also can't not put the caller on speaker at all , I also can't hear my music or gaming apps. When I turn my phone on or off it does not make a sound as well. I have turned the phone off and turned it off by pressing the top button and home button at the same time and that did not work. I checked the volume and the mute button and the volume is up all the way. I don't know what else to do can you please help me?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

    when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
    In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
    Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
    Any ideas - solutions - comments please?

    I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
    I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

  • I have never dropped my iPhone and when I try to take a video on my phone there is no sound and if I send it to someone they can't hear it either I don't know what the problem Is but will apple replace that? Or will it cost some money to fix it?

    I have never dropped my iPhone before and when I take a video and or send it to a friend they can't hear it and either can I. I was wondering if apple would replace it by sending me a new iPhone or if it would cost money to fix?

    You can message them in the chat click on this link http://store.apple.com/us/search/chat-support then click on Chat Now next to the blue bubble

  • I updated my iPad 4 with the new iOS7 and since then Skype started problem and now email i.e, yahoo as well. I can hear people on Skype but they can't hear me though it was working fine with old version. Is any one else having same problem?

    I recently purchased iPad 4 and it is only one month old. I updated with iOS 7 and next day got problem with Skype and yahoo mails. People can't hear me on Skype though I can hear them clearly. I was replying yahoo mails quite nicely and now as I start typing the iPad turns black and have to open it again. Is there any one else facing the same problem? I was thinking to go to apple shop for support? Any suggestions?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.

  • My microphone is not working on my IPAD 4... It's version is 7.0.4. Please help me coz i cant my sister in HK can't hear me on skype. It's our only way of keeping in touch. Im so helpless. Please help me. Thank u and God bless everyone.

    My microphone is not working on my IPAD 4... I can't figure out if the problem has something to do when i updated the version. It's version is 7.0.4. Please help me coz i cant my sister in HK can't hear me on skype. It's our only way of keeping in touch. Im so helpless. Please help me. Thank u and God bless everyone.

    Have you tried reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Can't Hear iMovie Audio On Any Of My Projects

    Firstly, I tried playing the iTunes stored in the 'Audio' Tab. I click the play button to hear the iTune and the button turns blue yet there is no sound. However, I can hear the clicks of the mouse and other such sounds. I am able to play iTunes directly from the iTunes program, however, it will not play in my iMovie. When I play back my project, there is no audio from the project. I have followed the following suggestions from the support pages included with the software as follows:
    If you can't hear some or all of the audio in your movie, here are some things you can check:
    • Make sure the volume on your computer is turned up. Use the speaker controls on your keyboard or the volume slider in the menu bar.
    • Use the volume slider under the iMovie monitor to increase the movie volume.
    • Make sure the audio checkbox is checked for the audio track you want to hear. The audio checkbox is to the right of each track in the timeline viewer.
    • If the audio checkbox is selected, then choose View > Show Clip Volume Levels and see if the audio levels for the tracks are set to a level that can be heard.
    I did all the Above, Yet I get no audio from my projects! I can adjust the volume levels when I view 'show audio levels' etc.., the wave forms are there, I just don't get any audio output. Thanks for any help!
    Mac Dual 2.7GH   Mac OS X (10.4.4)   Using EyeTV200

    Update: I used stored video footage I originally used to import into iMovie to create my project. I simply redid the import and still no audio; therefore, there appears to be something with the iMovie software. Do I need an update, how do I get the update or how can I repair it without losing the projects I already created? I'm at a loss here. All audio boxes are checked, etc..
    Now, for no apparent reason as I was writing this, I re-opened the project for the enth time and it started to work. What the heck is going on with this softare? Previously I had force quite my eyeTV in the event the audio was being used for this, etc.. All of a sudden it just started working, however, now I have to see if it continues to work and that this fix is not just temporary

  • I can't hear the dialouge in fe

    I upgraded today from an integrated realtek soundcard to the x-fi gamer. Amazing card I can't believe how great it sounds on my head phones. Anyway whenever anyone talks in fear cut scenes/in game radio/anything I can see them talking but I don't hear anything. I have the in game audio turned up all the way and I've tried turning up my headphone volume up all the way and it doesn't work either. I've also tried turning off all of the other sound except for voices and I still can't hear it even when I turn it off. I was really looking forward to playing fear with all of the nifty 3d audio this card has can anyone help me? I've also updated the driver to the most current version.
    My specs are:
    Windows XP SP2
    8600gt gpu
    gb ram

    Out of interest, what codec was needed?
    I have just tried to play 3 of my games - Medieval II, Ghost Recon Advanced Warfighter and F.E.A.R. All have no sound... well there are a few feint sounds, but not what it used to have. Even the bootup screens like NVIDIA, Ubisoft etc. don't have sound.
    Windows has all its normal sounds and some games are unaffected.
    I uninstalled the Audigy 2 ZS and reinstalled, nothing's helped there. Device manager reports no problems, dxdiag reports no problems. Obviously the card's working, but there's some other driver/codec issue/conflict.
    Cheers,
    Nick

  • I can't hear sound after upgrading to lion

    I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

    I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

Maybe you are looking for