Can't Hear Keyboard

I'm fairly new at Logic Pro. I just bought an M-Audio Keyboard and I can't hear it when I'm playing. Can someone show me how to set this up???

Assuming the keyboard you bought is a MIDI controller, you need to assign a plug-in to your corresponding audio instrument track. The basic operation of getting it all up and running is in the "Getting Started" supplement that came with your big box. I suggest a careful look at that to get through the basic set up and introductory portion of working with Logic.
If you're still having difficulty after that, there are plenty of people here who'll be happy to help!
G5 Dual 1.8 (Rev. A), 20 Cinema (x2), Logic 7.1.1 Mac OS X (10.4.8)

Similar Messages

Can't hear keyboard clicks or power turning off after ios 7 upgrade to iPad 2

Prior to upgrading iPad 2 with IOS 7, I could hear keyboard clicks when sending email as well as click associated powering off iPad when closing cover on it. These sounds are no longer heard with IOS 7 installed. Sound settings for keyboard clicks and lock sounds are on. How do I fix this problem?

If you lost sounds for keyboard clicks, games, apps, email notifications and other notifications, system sounds may have been muted. If resetting doesn't help, take a look at this.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Can't hear double-tracked keyboard in playback

I recorded a piano track as a software instrument, and had no problems with hearing it in playback. Then, I duplicated the track and played the same thing. Now, when I try to play through the song, I can only hear one or the other, or neither. When I select one of the tracks and restart from the beginning I can hear it, but as soon as I deselect it, I can't hear it. I have gotten both to play, but only very briefly before one track cuts out. Is this a software bug, or am I missing some setting?

Thanks! I was racking my brain with this! where in
the menu is this feature? Or in the manual?
No problem. The menu is:
View > Audio Scrubbing
But as I say to any editor learning FCP, if you go to a menu item more than 3 times in 10 minutes... memorize the keystroke command. You'll get much quicker.
For a list of keyboard commands:
Help > Quick Reference
(although I almost never find anything quickly in that quide)
Good luck!
- pi

Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M.

Can't Hear GM sounds from external Keyboard

My system set up is a Mac Mini OS X 10.9.5 with 2.3 GHz intel Core i5 and 5 Gb of Memory . A Focusrite Saffire Pro 14 interface.
I am using a M-Audio Keystation 61es connected via the USB to to the Mac,( and have done for the last 2 years ),
when I was using it in Garageband it worked perfectly as a 'Plug-in & Go' keyboard and i could access and play both the GM sounds on board or the GB sound Library.
Since Upgrading to Logic Pro I can only play Midi voices and loops from Logic, although it recognises the Model of keyboard and allocates the relevant channel, it also allows me to see the onboard menu of GM sounds, and registers in the volume of the track a signal coming through the relevant channel, so i know its communicating somewhere.
But I can't hear ANY of the GM sounds from the Keystations on board library.
Have looked at all the Midi Settings i can find in Logic and followed some paths suggested in the various Logic Manuals, but still no Noise !
I am no Techno Head so please! if you know what it is that I am NOT doing , explain it the simplest way you can.
Thanks in advance for any help that can solve this Problem
MyKee.G

As far as I can tell, the M-Audio Keystation 61es does not have any form of on board sound generation. So whatever you heard in Garageband was synthesized by GB. In the same way you'll have to set up a virtual instrument in Logic to generate the sound.
Apart from that, it sounds like you are not really aware of the difference between Midi controller data and audio data, or at least the way they are routed. The midi controller has no way to send audio to logic through a midi connection. If it had on-board sounds, you'd have to route the audio explicitly to logic using an audio interface or in rare cases using audio over the USB connection that also does midi. In any case, you'd have to route the sound manually. The external instrument plugin in logic allows you to do that easily. But again, I don't think that applies to your situation.
Cheers,
Jazz

Can't hear usb keyboard

Hi, i can't hear my m-audio keystation49e keyboard when i press the notes on it.
I have only opened the tutorial song at the moment, as i have only just got logic pro7.2 and am still using the tutorial song to experiment and learn.
I went to audio midi setup and my keyboard is recognised and selected i also clicked apply on it and then clicked test sound and it played so i know its working.
if its any help, i cant find my keyboard in the logic set up assistant when i click add at the midi devices part, so i just selected midi in - my keyboard.
thanks for any help

Ok, I may be "blind" but I think I've figured out what you have to do. Open the Tutorial file (ok, you probably figured that out already). From the main overhead Window menu, selected Environment. If the environment window shows you a graphic of a keyboard and cabling you can skip the next step, if it shows a mixer do the following. On the left side of the environment window it will say Audio, hold the mouse button down until you have a menu and select MIDI-Instr instead of Audio. Now you should have a graphic representation of a keyboard and some cabling. In the upper left of the map there is an iconic representation marked Physical Input Object. Rubber band select that bad boy and hit delete. If your keyboard now works, save this entire file with a clever name like, Newtorial and continue to follow the manual from there. Don't worry, the only way you can screw things up is if you alter the tutorial file and then save it with it's original title. If this works, please let us know! If not, calling Apple support is not a bad idea at all, they're very pleasant and helpful and based in Texas which is a much bigger place than New York. They've helped me a number of times, even though I'm "blind". Good luck and keep us apprised.

Can't hear MIDI keyboard thru GarageBand (or anywhere else)

I have a year-old MacBook running Leopard, and a Midiman (now mAudio?)49 Keystation USB controller (keyboard). The MIDI setup utility recognizes one MIDI input, but I can't hear the keyboard in Garage Band 3 or any other app I use (Songworks II). I've tried different input settings in Garage Band preferences, System Preferences and in the Audio MIDI setup utility, to no avail. The same keyboard works fine on my iMac G4, running the same software. As I said, the keyboard is USB powered. Is it possible that the MacBook doesn't produce enough power to run it? I have some serious projects to do and would be grateful for help. Maybe I need a newer keyboard? Thanks.

Thanks for the replies. Turned out I needed new drivers.

When I talk to Siri she can't hear me and when I try and use my mic on the keyboard it doesn't work. What do I do?

When I talk to Siri she can't hear me and when I try and use my mic on the keyboard it doesn't work. What do I do?

Siri seems to not be working for many people right now. The only thing you can do is wait.

I can't hear my keyboard when recording.

I have a Edirol Midi keyboard PCR-50 and I can record a software instrument with it but There is no monitor so I can't hear what I am recording. How do I turn on the monitoring?
Unlike when recording a real instrument the stereo/mono/monitor control in the lower right window is not there for the midi/software insruments.

The organs are kind of different...
It may be that your keyboard is not sending MIDI data on channel 1.
Can you reset the keyboard to factory defaults? Sometimes that solves problems like this.

Can't hear audio in trim mode.

When I'm in trim mode and I play, in order to move the cut, I can't hear any audio. It has nothing to do with scrubbing on/of because pressing shift+s has no effect. It's also not working when I'm holding down "K" and pressing "L" simultaneously.
DrL

works for me. Have you looked in the view menu to make sure audio scrubbing is checked? It's possible you've reset the keyboard shortcut or your keyboard has somehow or other gotten corrupted. You might try deleting your fcp preferences. Use this:
http://www.digitalrebellion.com/prefman/

Iphone 5s - siri can not hear me

I Have troubles with Siri and the keyboard microphone. Siri can not hear me and it is not possible to dictate any text via the keyboard. Both functions are working fine when I use a external headphone with microphone. The voice memo app is working correctly, so I don't think it is a hardware problem. I checked all siri settings and they seem okay. Voice feedback is not on handsfree but on always. Does anybody know how to fix this problem? I have the feeling the iPhone isfor these functions expecting audio input from annexternal source in stead of the build in microphones. Does anybody have an idea to solve this problem?

Well, that's a new comman issue comes up with IOS 8.3 version. Before 8.3 IOS version Siri were only available in some languages, however, after 8.3 release many languages are supported.
Even if you enable Siri > General > Settings.. still respond your voice.
No need to try to troubleshooting device - it will not solve your problem. You have to restore your iPhone and then setup as a new device. That's solution.
May I ask you to tell me if you siri in English ?

Can't Hear iMovie Audio On Any Of My Projects

Firstly, I tried playing the iTunes stored in the 'Audio' Tab. I click the play button to hear the iTune and the button turns blue yet there is no sound. However, I can hear the clicks of the mouse and other such sounds. I am able to play iTunes directly from the iTunes program, however, it will not play in my iMovie. When I play back my project, there is no audio from the project. I have followed the following suggestions from the support pages included with the software as follows:
If you can't hear some or all of the audio in your movie, here are some things you can check:
• Make sure the volume on your computer is turned up. Use the speaker controls on your keyboard or the volume slider in the menu bar.
• Use the volume slider under the iMovie monitor to increase the movie volume.
• Make sure the audio checkbox is checked for the audio track you want to hear. The audio checkbox is to the right of each track in the timeline viewer.
• If the audio checkbox is selected, then choose View > Show Clip Volume Levels and see if the audio levels for the tracks are set to a level that can be heard.
I did all the Above, Yet I get no audio from my projects! I can adjust the volume levels when I view 'show audio levels' etc.., the wave forms are there, I just don't get any audio output. Thanks for any help!
Mac Dual 2.7GH Mac OS X (10.4.4) Using EyeTV200

Update: I used stored video footage I originally used to import into iMovie to create my project. I simply redid the import and still no audio; therefore, there appears to be something with the iMovie software. Do I need an update, how do I get the update or how can I repair it without losing the projects I already created? I'm at a loss here. All audio boxes are checked, etc..
Now, for no apparent reason as I was writing this, I re-opened the project for the enth time and it started to work. What the heck is going on with this softare? Previously I had force quite my eyeTV in the event the audio was being used for this, etc.. All of a sudden it just started working, however, now I have to see if it continues to work and that this fix is not just temporary

I can't hear anyone!

Hello Everyone.
This is my first query, so please do bear with me.
I purchased my Iphone 4 September 2010. All was fine, the phone worked perfectly, no glitches (apart from the odd occasion of the keyboard keys shifting), but all in all, it worked fine. But the past few weeks, I have noticed when I call someone, or someone calls me, the line would be crackly, and would therefore cause for an 'bity' conversation, making it difficult for me to hear what they are saying. This weekend just gone, I tried to call home, and literally I can't hear a thing. The person can hear me BUT I can't hear them! The only way for me to hear anything is to put the phone on loudspeaker, which really is not convenient, and I don't particularily want every tom, dick and harry earwigging into my conversation - really is not practical at all.
Now my dilemma is this - I live just over an away from my nearest Apple store . .. I am also just outside the warranty period (typical, huh?). What are my options?
Really would appreciate some advice, help, as this is driving me insane - having to cancel calls, and either text people (text conversation), or wait until I arrive home to call people back which is incredibly inconvenient.
{I'm from the UK}

Anyone? . . . :S

Can't hear audio in mac PE 9

I can't hear audio in my sceneline or timeline when playing clips. Makes it really hard to edit!
i capture video/audio from my mini-dv sony cam or from vhs through firewire gadget...
i added an m4v file to the project, couldn't hear audio either
the audio is there, because if i just trim off the ends and create a dvd it has audio....
The problem is on my mac mini... i installed it on my i7 laptop and audio works just fine.
i've checked all the audio settings on both machines and they are the same.
both have vlc and perian installed
just installed the 9.01 patch... no change
does anyone know what might be causing this?
thanks

I've tried changing those to all possible combinations.... System Default, Built-in Output, etc. nothing helps.
on the mini, if you have speakers plugged in, it shows "headphones" as the only output option
i notice in the "audio output mapping" it shows headphones 1 and headphones 2
that seems strange as there is only one set of headphones
i checked my laptop settings ...there was nothing selected on my laptop in audio output mapping
"nothing selected" was not an option on the mini... so i renamed my prefs file and started PE again
then i had nothing selected in the audio output mapping... but it still didn't work
i forgot to mention something.... if i click on the slider/trim thing, and just hold down the arrows on the keyboard to advance the video, it advances at super slow motion and i DO get audio... so i think i have preferences set right.
any other ideas?

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

I'm sure you have checked, but make sure your mute button on the keyboard is not on , also check that you haven't touched the space bar during a call as that mutes it.
Check your settings in Skype>Preferences, Audio/Video tab. Here's what mine look like:

Can't Hear Keyboard

Similar Messages

Maybe you are looking for