Can't hear live track when playing midi drum track

This is a really dumb question. I've been away from Logic too long. I'm trying to monitor a live guitar track while I play a recorded midi drum beat. I can hear the midi track fine. And I can hear the live guitar track when the midi track is not playing. But as soon as I start playback, the live track goes silent even though the red record enable button is on and the levels show live guitar signal. It just doesn't make it to the output. If I actually record a region, I can hear it. But I don't want to record, I just want to practice with effects and a drum track.
I've done this before. What have I forgotten?

Hi,
hold down the "CTRL + click" ot rigth button of the mouse in the REC icon on the transport...
Auto Input monitoring (must be off)
G

Similar Messages

Can't hear long notes when played half way through

This is probably a common problem/question.
I often have very long sections with a single continuous chord (in this instance ‘dynamic swell’ ‘extra cello sect legato’ and ‘tonewheel organ’)
My problem is that to check edits on small sections of a composition I have to go right back each time to where the aforementioned chord begins in order for it to be heard. if I put the playhead half way along the chord it doesn’t play. Is there a way that the playhead can pick up on notes half way through? I’m sure this has been dealt with dozens of times on this forum but I could only find one post from 2010 that I couldn't apply to Pro-x. Thanks!

In LPX you need to turn on the Chase functionality
This is done by going to the Project Settings menu (Not Logic's General prefs)
LPX Menu Bar > File > Project Settings > Midi > Chase tab
I have mine set up as thus...
You may not need to or wish to turn on everything I have selected.. Play around and see what works best for you and your own method of working in Logic.
The specific function for playing sustained notes half way through is the first option (Notes and Sustained)
Note: This is a per Project setting and so only applies to that project and not any others.
Therefore...
I suggest you create a new project, set up chase and then save this blank project out as a template you will then choose and open each time you create a new project from now on... You new chase settings (alone with any other settings you wish to use in every new project) will then be setup of each new project you create. For any older projects you need this functionality in... you will have to set up chase for each one and then save.

TS1008 when the usb mic (Blue) is connected I can't hear the track play

when the usb mic (Blue) is connected I can't hear the track play. Track plays fine when mic not installed...hoping this is a typical set-up issue easily resolved.

Did you choose the the output in Garageband > Preferences > Audio midi?

Can't hear second track of Beatles

I have put the Beatles song in final cut pro call in my life when it gets to the part where the keyboard comes in I can't hear it now when I play the song in Itunes as a mp3 I hear the whole song but when
I stick it into final cut as a aiff I seem to lose a track any suggestions?

Thanks for all your help we figured it out, I know you need permission this is just for his own personal use, and half of the song is owned by Sony so you would need Michael Jackson and Sonys permission which takes about 2 to 4 weeks to get for any song which we do through ASCAP and BMI for most of our music.
Thanks again guys!

I can not hear the voice when i call

i can not hear the voice when i call, its very poor quality sound i feel, i tried to control with the volume control buttons but still i am unable to increase volume, could you pls advise the solution??
manoj

Have a look in Utilities > Audio Midi Setup

!Can you record live while game playing with adobe audition? PLEASE HELP!

Can you record live while game playing with adobe audition? I have a youtube channel and I want to record voice as I'm playing of course and cancel out the noise maybe put a nice effect on it.. But how do I do this? Please help! I only see ones for recording like after.. But I want to record it as it's happening is this possible!? it has to be. thanks *ADOBE AUDITION CC*

That'll depend on the capabilities of the sound card/audio interface you're using. If that interface can feed the right things to Audition, it can record it. For just the game, look for "Wave Out" or "What U Hear" on the list of audio sources but not every system has this. Also, if you want to record your own contributions as well as the game sound, that gets more complex too.
I know that there are specialist pieces of software that are designed to record live gameplay (which don't rely simply on your local sound card). I know of a couple called "Action!" and "XSplite" but I have not personal experience with either.
However, before going that direction, check out the "Record Devices" menu in your sound system and see what it allows.

Why do i hear no sound when playing songs with headphones and without?

all of a sudden i can't hear any song i play, using the headphones and not using the headphones. I've done the hard reboot three times, turned on and off my itunes icloud, then back on. Still no sound when playing music.
Any solution?

i wish it were that simple (mute button)
Everyone I work with is having the same problem, presently Apple's Music Match is not working.
I certainly hope they will be able to fix this as soon as possible.

I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

I have an iphone 4 and cannot get my mute off when I am using Facetime. I can hear them, but they can't hear me. When I touch the mute button, nothing happens. Can someone please tell me how to fix this?

the mute button is a switch you need to flip, not touch. if you look at it and see color, its on.

HT2188 I can hear caller but they can not hear me except when using speaker phone

I can hear caller but they can not hear me except when using speaker phone

First of all, make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
One other problem could be your microphone. Does it work for anything else other than a call?
Good-Luck!
kpower28
Please mark this as "solved my problem" or "helped me"!

Any idea why I can only hear a caller when I'm using speaker phone?

Does anyone know why I can only hear a caller when I am using speaker phone?

Hi goodferg,
The troubleshooting steps below may help you with the sound issue you are having with your iPhone 4:
iPhone: Can't hear through the receiver or speakers
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
- Judy

I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

What do i do if i can't hear a track in garageband?

What to do if I can't hear a track?

Which version of GarageBand do you have?
And what have you tried already to fix it?
Is it only one particular track you cannot hear, or is GarageBand silent?
A real instrument track or a a software instrument track?
Have you checked, if any tracks are muted or soloed?

When I talk to Siri she can't hear me and when I try and use my mic on the keyboard it doesn't work. What do I do?

When I talk to Siri she can't hear me and when I try and use my mic on the keyboard it doesn't work. What do I do?

Siri seems to not be working for many people right now. The only thing you can do is wait.

ITunes : I can't hear any voice when I play videos, can you?

I'm currently using iTunes as a song/movie/video player.
When I play songs, it seems fine n' the sound is good.
But it doesn't seem so with the videos.
I can't hear any voice coming out when I play movie or video files.
But I can hear it perfectly when I play them in my iPod!?
Every movie and video files are converted to '.mp4'
Is this has anything to do with my problem?
I don't know what's wrong with my iTunes
Any ideas?
Thanks'' :):)
iPod Video Windows XP

hiya!
I can't hear any voice coming out when I play movie or video files.
But I can hear it perfectly when I play them in my iPod!?
hmmmm. okay, let's first try a careful standalone QT 7.0.4 reinstall.
download and save a copy of the QT 7.0.4 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.0.4 Standalone Installer
if that install goes through okay, do you get sound with your videos?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

I can hear the video when played on iPhone5 but when emailed the audio is very low

I'm unable to hear the videos when they are emailed from an iphone5. I can play it on the phone but the volume is extremely low when sent to email. Any answers on how I can hear the video played louder when I open it from email on pc?

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
Thanks,
Chris

Can't hear live track when playing midi drum track

Similar Messages

Maybe you are looking for