Can't hear menu effect (click sounds) through Optical cable

After connecting my Apple TV to my receiver through Optical I've noticed that I can no longer hear the Apple TV's menu sounds (click sounds) anymore unless I scroll through a menu real fast.
Is there anyway to fix this?

As far as I can tell, the M-Audio Keystation 61es does not have any form of on board sound generation. So whatever you heard in Garageband was synthesized by GB. In the same way you'll have to set up a virtual instrument in Logic to generate the sound.
Apart from that, it sounds like you are not really aware of the difference between Midi controller data and audio data, or at least the way they are routed. The midi controller has no way to send audio to logic through a midi connection. If it had on-board sounds, you'd have to route the audio explicitly to logic using an audio interface or in rare cases using audio over the USB connection that also does midi. In any case, you'd have to route the sound manually. The external instrument plugin in logic allows you to do that easily. But again, I don't think that applies to your situation.
Cheers,
Jazz

Similar Messages

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

I have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

i have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

sounds like ur ipod's mic is blocked with something check the back on the ipod near the back camera

Soundtrack Pro doesn't work. When I open it, i can only hear a heartbeat ticking sound over and over again.

Soundtrack Pro doesn't work. When I open it, i can only hear a heartbeat ticking sound over and over again, then I get the spinning beach ball when I try playing a sound efx.

Update: I tried reinstalling firefox, same thing happened again. When i stopped the process "plugin-container for firefox", i could use parts of firefox (didn't get an error sound) for a while, until the process "plugin-container" startet again.
so what am i to do? switch to chrome?

Just installed iOS 5 and my phone does not ring and i can't hear my keys stroke sounds

just installed iOS 5 and my phone does not ring and i can't hear my keys stroke sounds is there any solution to this problem

If KiltedTim is correct I agree with him. If the phone is not hacked try temporarily disabling your antivirus and firewall that may be blocking access to gs.apple.com. See also this article from Apple: http://support.apple.com/kb/TS3694#error3194

Clicking Sound Near Optical Drive?

Occasionally if my MacBook Pro shakes a little, I'll hear a little clicking sound. It sounds like it's coming from either the optical drive or just below it, to the right of the trackpad. Should I be concerned? I only noticed this after my computer froze once, and since then it occasionally freezes, but returns to normal after 10-15 seconds.

Why do you shake your computer, for fun or for profit? Your computer is not an iPod. The clicking might be the sensor protecting the hard drive. That scenario makes sense especially when you mentioned that the computer froze. Here's some advice: don't shake your computer. You risk damaging the internal components, or dropping your computer.

Can't hear .wav as I scrub through frames

I used to create flash cartoons with characters lip synced to
sounds. I did it by placing the sound on its own layer and then
drawing each frame's mouth position accurate to the sound in each
frame.
I synced it by scrubbing (moving) through the frames, and I
could hear each discrete sound for each frame. Now I hear nothing,
which makes it very hard to lip sync! How can I hear the pieces of
the .wav in each frame?

No, it's not muted. The sound plays when I hit enter, but I
just can't hear it as I'm scrubbing through. I'm on a different
computer, and I wonder if it's some sort of settings issue. It just
functions differently than it did where I was before.
The sound plays when I hit enter, but I can't stop it before
it's finished.
The sound does not play unless I start it on or before the
first frame.
I can't hear any sound when dragging through the frames on
the timeline.

Since I let my G4 Powerbook's battery run down, I hear a loud CLICK SOUND at regular intervals, that I never heard before. It sounds like a back-up click. Is this a problem?

After letting my PowerBook G4's battery run down all the way, I hear a loud metalic CLICK sound every so often. Not sure if this is a problem or not. Should I be worried, or have it checked out?

If it's not the original PowerBook, and you have the original OS X disks that came with your PowerBook, run the Apple Hardware Test. If it's the first PowerBook, the Apple Hardware Test is available online.
When prompted, run the extended test. Depending on how much memory you have in the system, the test can take an hour or more.
TechTool Deluxe or Pro can do similar testing, too.
You're looking to see if it gives you any error messages about the hardware in your system.

Can't hear phone calls/button sounds or use speaker phone lg extravert

I tried to make a phone call but can't hear any ringing, the call goes through but nothing happens. My volume for the earpiece is at maximum and so is the main volume on my phone, I can't hear the button sounds either. If I hit the play button, I can hear the ringtone it plays for volume check and it will also play the power up and power down tones. I tried to use speaker phone, but when I touch the button it won't work. I took the battery out and that did not help at all. I also reset my phone, and that also did not help. I checked my alarm setting since I use that frequently and it works just fine too. I am extremely unhappy because I had this phone replaced in August because the camera stopped working and now it looks like I'll have to do it again but out of warranty.

@ceasonly
I'm glad you still have some way to hear the audio on your phone, but let's get that speaker working! The most common reason for the phone's sound to stop working would be the switch on the side has been nudged accidently. Try to enable then disable Silent Mode http://bit.ly/Xhs40k to get the volume working again. Also, try to simply restart your iPhone by holding the power switch and home button together for 10 seconds. Nothing gets erased but it helps cleat out any temporary glitch your phone may experience.
If you're still having trouble, the next best step would be to reset the phone's settings http://bit.ly/HWRbPl. This does erase information from your phone, so make sure to back up http://support.apple.com/kb/HT1766 your iPhone information first.
Keep me posted if you continue to have audio trouble.
JenniferH_VZW
Please follow us on Twitter @vzwsupport

I can't hear a mouse click

Hey,
On a slide, after you insert the mouse, isn't there something I should do to hear the mouse click. I've already got all of the buttons checked under the mouse properties(show mouse click and mouse click sound). Now, shouldn't I simply hear a click at the end of the mouse object? Is there some kind of global setting I am missing?
What gives?
Thanks.
Jeff

Hi there
Mouse click sounds exist as an audio file and are not recorded. While I'm not one of the Captivate Development team, it is my understanding that all that is recorded are the starting and ending points as well as the pointer in use.
Of course Mouse object provides click sounds. The evidence is in the dialog.
A bit of a mystery as to why you may not be hearing them. Any chance of sharing your project so one of us may see first hand?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How can I hear the effects when not recording?

There are a lot of effects in LE8 and they're actually quite good. I use them frequently when recording guitar, but the only problem is that I can hear them ONLY when I'm recording. For example, when I'm not recording, I add effects like 'stereo delay' and 'chorus' but can't hear them until I hit the record button and actually start recording. I would say it's possible to hear them 'in effect' when I'm just playing, not necessarily when I'm recording...anyone have any suggestions?
Thanks!

Aaahhh and anotherone:
Check if you have - by accident - activated the "Low Latency Mode". In this mode, Logic turns off some Plugins to achieve minimum latency.
If you want to use Plugins "live", then turn off each and every plugin you don't need. Turn off all tracks you don't need. Work only with the one Audio Track where you put the plugins you like. And use "Live Mode" in the Audio Setup - maye this should be a last hint.
Fox

New ipad 2 is making clicking sounds through the speaker

Just received my new ipad 2 in the mail. I set up the ipad yesterday, no external noises whatsoever. Went to use it for the first time today, and as soon as I picked it up, and before I could even open the cover, it began to make clicking noises through the speaker .It does this with the cover closed, and when I am not even touching it! ( The cover is the correct cover for the ipad2 w/3G)
It sounds like rapid camera clicks, but I have yet to use the camera. I checked to make sure it was not taking pictures on its own, and it wasnt. I even covered the outside camera lens just in case someone had hijacked the camera remotely from somewhere out in cyberspace!
Thank you so much for your help.
PS It was purchased thorugh the online apple store as a refurb.

NEVER MIND! In the Sounds Settings, I just turned the Lock Sounds switch to off and that solved the problem!

Hearing the effects on output through the amp

I'm using a new interfact (m-audio fast track ultra) and have had no issues with set up. I've got my guitar going through input 1 and out to my amp - no problem. But - I don't hear any the pedal effects on output. I hear them on the track recording - but, is it not possible to hear the effects on output? My amp is connected to the m-audio output so, my assumption - which may be incorrect - is that garageband is feeding the m-audio via the USB 2 connection, thus, any applied effects would be audible on output.
Perhaps I'm all wrong - though I'm hopeful that I just have a configuration issue.
Many thanks if anyone has any info that will help.

and take them in and out at different parts of the song.
GarageBand does not offer effect automation.
This may help:
http://www.thegaragedoor.com/tutorials/automation.html
<hr width="250" align="left">
HangTime [Will Compute for Food] B-)>
♪♫ The Bullets and Bones Band ♫♪
Disclaimer<hr width="250" align="left">

How I can bring back the keyboard clicking sound?

I used to have a clicking sound when I used my keyboard.
The sound went away. How can I get it back?
Thanks.

Have you looked at it in Settings? Try cycling the selection there.
Do you have any sort of Muting turned on?
If you can't find an easy thing, like the two above, then try a Reset of your iPad.

Surround Sound through optical on MacBook Pro 2011

So I've got this brand new MacBook Pro connected to my 5.1 surround sound home theatre system through optical, and I can only seem to get stereo sound out of it. I go through the Audio MIDI Setup and it always only shows 2 speakers and when I open up Left 4 Dead 2 it also only shows 2 speakers, any ideas on how I can get the surround sound working, I've been searching for awhile and haven't found anything, thanks?

Stereo has 2 channels, 5.1 surround sound has six channels total.
The Mac passes 5.1 through the optical cable/port.
The audio has to have a 5.1 encoding of some sort, Dolby, Logic etc.,
Your receiver has to be set to decode the 5.1 format being sent to it.
You can test this with a DVD that has extra sound capabilities in the audio menu, then match the encoding on the receiver.
Some 3D games provide surround sound on a Mac, but usually it's to a PC sound card that handles the processing. Since Mac doesn't do that, it just passes the surround sound through, the surround sound must be in a encoding format your receiver can understand.
Some good receivers can take Stereo 2 channel and separate out some of the frequencies and send them to the appropriate speaker, like the sub woofer and mid range. Then take the left and right channels and duplicate them for the front and rear left and right channels to fill a room with sound. However this isn't true surround sound as you won't hear objects moving up behind you or flying past over your head like in a good movie or video game with true surround sound abilities.
Your lucky I was here, not many people mess with surround sound on a Mac, or really don't even know it's there.
But it's really worth the effort, even iTunes music sounds great. A iPod sounds like crap in comparison.

Can't hear menu effect (click sounds) through Optical cable

Similar Messages

Maybe you are looking for