Can't hear mic/line in on HP G70t 200

I can not believe my widescreen multi-media laptop has a sound card which cannot simultaneously monitor audio from the mic/line in while playing or recording it.  But apparently that is the case with HPs G70t 200.  Unlike other posts I have seen, I have no problem recording anything.  But if I want to hear it I have to play it back later.  So that whether I want to listen to an external source audio, or record myself, I can't listen to it in real time.  I have installed the latest drivers, both for the Conexant high definition Smart Audio 221, and the mobile Intel 4 series Express Chipset Family, which includes the driver for Intel high definition audio HDMI.  But other than getting my sound panel to recognize the existance of a plug-in mic and headphones, these enhancements have done nothing to enable audio monitoring of throughput.  If anyone believes they know the reason why, or has the solution, I'd appreciate it if you could discuss it by responding to this post.  This laptop is running Vista home basic..

Why do I only find dead ends on this issue?!?!

Similar Messages

  • URGENT! I can't hear my mic in logic express, I am using line 6 KB37 as audio interface

    I just bought logic express 9 and I am having trouble. I can't record my vocals, I have the mic set up with the line 6 KB37 audio interface and when open a new project and create a new track I can't hear anything. There is no signal at all, even on the KB37. Any help much appreciated.

    Hi,
    1) What kind of mic are you using?  If it's a condenser mic, make sure you have phantom power turned on.
    2) I am not familiar with the KB37 audio interface.  What input is the mic on the device?  If it has a mic input, and a guitar input, then it's probably Input 1, but if it isn't you'll need to change the input on the track in Logic to whatever number it should be.

  • Can't hear audio from handheld mic recording

    I can hear interviews I recorded with a handheld mic on videos edited in iMovie and uploaded to YouTube only if I access YouTube via a brower such as Safari and Puffin and only if I use my new third generation iPad or an iMac or PC.
    If I try to access the videos via YouTube's app on my new iPad, I can hear the nat sound recorded with the video camera but I can't hear the interviews recorded with a handheld mic.
    I can't hear the interviews recorded with a handheld mic on my iPhone 4 through YouTube's app or via a browser.
    I wasn't having any problem three weeks ago.  This just started last week.
    What is causing this problem?  Is there a workaround or solution?

    You're connected to the line-in on the Mac? So set to Line-In or Built-In
    http://www.bulletsandbones.com/GB/FAQPages/RecordLineIn.html

  • Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

    Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri  works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

    This is a wireless carrier issue.  The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
    Contact your wireless carrier about your call quality issue.

  • Iphone 4 during a call can't hear or be heard. But I know both the speakers and the phone call mic work fine.

    I bought an iphone 4 and have been having multiple issues since the moment I got it. My biggest issue when I received it was that the noise cancellation mic didn't work. I sent it back to the people I bought it from to fix it and they fixed the other mic but not the noise cancellation mic. So I know that one doesn't work with apps, speaker phone, that sort of thing. I've been just dealing with it and using headphones with a mic on them.
    Well once I put my sim card in and had to go through a huge debacle with AT&T to do it, I got a phone call and I couldn't hear anyone and they couldn't hear me. I tried switching it to speaker phone and using my headphones and still nothing. I first tried factory reset and network reset and it didn't do anything. So I tried the fix where you put a piece of cardboard in the phone and the other fix where you loosen and then re-tighten the grounding screw. Now I can hear the other person but only on speaker phone, the call is choppy, but I can hear them so progress! They still couldn't hear me. However, when I took the call off of speaker phone it was back to dead silence. I tried putting in my headphones to see if they could hear me, they still could not hear me even with the headphone mic. I'm not sure what else I can do!! I know the speakers and mic work because I listen to music and play games and I hear those and when recording on voice memo the mic and playback work fine.I also know that it isn't any issue with signal because it happens where ever I am, low signal or all 5 bars! I guess I'll try cleaning them and try putting a thicker piece of cardboard but I don't expect those to work. If you can help with any suggestions at all please let me know! I have been having the worst luck with this phone and i'm getting absolutely fed up.

    Hey there RJOBoston,
    Take a look the article below, it provides troubleshooting tips that should resolve the issue you’re running into with not being able to hear or be heard on calls.
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    Cheers,
    -Jason

  • When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

    When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

    I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

  • I can hear my incoming calls but the person on the other line can't hear me. How can I solve this problem?

    It's been more than a week since I had this problem.
    As I said I can mostly hear the person on the line but the person on the other line cannot hear my voice.
    How can I fixed this problem? Do I have to go to the apple store? My warranty has expired and I can't get to the apple store easily becasue it's too far from where I live:(  Please help.

    Does your iPhone say headphones when you adjust the volume, even when they are disconnected?
    You can try disconnecting and reconnecting the headphones 5-6 times or restoring the iPhone.
    If that doesn't do it, you can setup service for the iPhone online or have a Genius take a look at it.

  • All data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ?????

    all data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ????? What is wrong with it????  How do I fix it????

    You aren't attached to a bluetooth headset or other device for some strange reason?  Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.

  • Can't hear myself talk - No mic playback - HS 1000 headset

    I have a Creative Fatal1ty HS-1000 USB headset and I can not hear myself talk into the microphone. I have emailed tech support for the third time and they keep referring me to their help articles on the website but it doesn't help.
    I have no option in the windows volume control to turn up or un-mute the mictophone in playback control.
    Here's a screenshot...

    I have the same exact problem. I also have XP.
    I found the mic volume slider, it's the "Volume" button in the voice recording section. I have it turned all the way up, but still get nothing.
    I installed all the latest drivers, Control Consoles, etc etc.
    I was pretty much ready to give up.
    Update: The microphone can be removed. It pulls straight out. That means, it may not have proper contact.
    That was the case for me. I put it back in, and must've gotten it just right, because now it works. I guess the contacts are a bit touchy.
    Anyway, If you're out there and getting nothing from the mic test, this may be your problem.

  • Mic can't hear directly from speaker

    pls help me,
    my laptop compaq V3754TU sound from mic can not hear on speaker. i try check at sound properties, mixer device "conexant HD Audio output" on the PLAYBACK SHOW THE FOLLOWING VOLUME CONTROLS: check box for microphone not have... :-( .
    only have check box for microphone in mixer device "conexant HD Audio input". so i can not hear voice directly from speaker.  PEASE HELP ME....

    If you have tried all the steps mentioned in this article Troubleshooting iPhone hardware , you'll have to get your phone checked by Apple or an Authorized Apple Service Provider.
    Acoustic-speaker/microphone/receiver
    Get help with these issues:
    No sound or distorted sound from speaker
    Microphone issues
    Receiver issues
    No sound through stereo headset

  • I can barely hear the person on the other line, i tried resetting but it didnt work

    I can barely hear the person on the other line, i tried resetting as suggested by other users but it didn't work. Help!!

    Do you have a screen protector covering the speaker?
    Have you powered the iPhone off and back on?

  • I can hear the voice in normal call but the other line can't hear me

    i can hear the voice on the other line but the other line can't hear me

    User troubleshooting is restart, reset, restore from backup, restore as new. Since calling is a carrier function, you can check with them about your account. If all of that is good, then contact Apple or your Authorized Apple Service Provider to have the hardware checked.

  • TS1008 when the usb mic (Blue) is connected I can't hear the track play

    when the usb mic (Blue) is connected I can't hear the track play. Track plays fine when mic not installed...hoping this is a typical set-up issue easily resolved.

    Did you choose the the output in Garageband > Preferences > Audio midi?

  • Considering a Macbook pro 13".  want to use garage band - how do i run line in from my guitar.  There is not a mic/line input that I can see in specs.

    Considering buying a Macbook pro 13".  Want to use garage band - how do i run line in from my guitar.  There is not a mic/line input that I can see in specs.

    Simple. GarageBand question, GarageBand forum where all those users are jacked into their Macs and can tell you how. Also look to the right of your post to the column, "More Like This."---------------------------------------------->
    https://discussions.apple.com/community/ilife/garageband

  • I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.

    I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.  I tried different input and output settings but it didn't help.  Any help will be appreciated.

    Hear your microphone or instrument as you play and record (monitoring)
    You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
    You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
    Hide
    To turn on monitoring in the track header:
    Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
    Click the Monitor button in the header of the track you want to use.
    HideTo turn on monitoring in the Track Info pane:
    Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
    From the Monitor pop-up menu, choose one of the following:
    Choose Off to turn off monitoring. You can hear your instrument only while you record.
    Choose On to turn on monitoring and protect against feedback.
    Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
    For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
    You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
    If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
    SEE ALSO
    If you don’t hear sound from a Real Instrument 
    Was this page helpful?Send feedback.
    © 2010 Apple Inc. All rights reserved.

Maybe you are looking for

  • IPhoto 8 and Raw

    Hi everyone, I recently took 600+ Raw photos (Nikon D70...roughly 3.85 gig of pictures)and imported them into iPhoto 8 as RAW photos. I understand that it (iPhoto 8) automatically converts them into jpegs and leaves the raw photos untouched, but it i

  • "G/L Account is missing" "Good Receips PO - Rows - Warehouse  Code]131-46

    I don't understand that error.  My Warehouse has many associates accounts.  On the row lineI see the account number and it is somewhere in the Warehous G/L Account code. I have no problems to do a purchase order, but I got that problems with Good rec

  • Printing List of Tags

    I am using PE 5.0. How do I print a simple test list of all of the tags, including categories and sub-categories? Bill

  • Spry Menubar in table -problem in IE

    I'm a newbie to web design and this software...having said that here is my issue: I inserted a horizontal Spry menu bar in a cell of a table. When viewed in Firefox, all is well. When viewed in IE, the Spry menubar is no longer in the cell but droppe

  • Odd window icons in Mavericks

    Sometime when I drag a finder window I (nearly always) grab the new "tab bar" area in the finer window. Upon mouse button release if I'm over the desktop, it creates a little window icon of the "tab" finder window. These icons have no interaction and