Can't hear my podcast in both headphones

hi guys
ok so im pretty new at this, and this may have been asked before but ive been searching the forum for about an hour and found nothing so far, so im hoping someone can help.
ok, so i have started doing a podcast with some friends, and i have just exported it and put it onto podbean and everything, but when i listened to it on my ipod i could hear nothing (or barely nothing out of the right ear)
i have tried having a play and searching in preferences etc, but cant alter this.
anyone know how to fix this so vocals are played out of both ears?
the songs seem to play fine, but any vocals only go through the left ear.
i recorded vocals in both garageband and though audio hijak, and both have the smae issue
if anyone could help i would be mucho gratefull
cheers
matt

hi
well i tried that. i set the track the vocals are in to mono 1, and it still didnt really come through the right ear. i also tried to set it as mono 2, but the same happened.
i also tired to copy it so i had male voice as mono 1 and female voice as mono 2, with the audio track in each. but it still just comes through let ear.
is it something i have to change in audio hijak pro?
sorry im abit useless
cheers again
matt

Similar Messages

  • Can't hear my Podcasts

    I received a ipod touch for Christmas and just realized I can barely hear my podcasts. I've tried to adjust the volume on the touch. The music on the touch plays at a reasonable volume. What am I doing wrong?

    You need to adjust the gain in the podcasts in iTunes or other audio/video software.
    In iTunes, select the podcast, and get info.
    Goto Options, volume adjustment.
    Scott

  • Can't hear my guitar from both speakers

    I have recorded a song but I can't hear my guitar from both speakers !!! What's wronk?

    Check in System Preferences>Sound>Output that you have the Balance Slider in the center - not to the left or right. Also check the Guitar track balance knob - the white dot should be at the top.
    eMac 700 MHz G4   Mac OS X (10.4.7)  

  • TS1702 All of a sudden I can only hear my podcasts in "fast" voices...not fast enough that I cannot understand what is said but still annoying!

    All of a sudden I can only hear my podcasts in "fast" voices...not fast enough to not understand but just fast enough not to be "real"

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

  • I can't hear my podcasts any longer

    I can't hear my podcasts any longer. Began yesterday after two yrs. iOS is up-to-date--7.1.1. The speaker's voice cannot be heard on podcasts. Switched to music app. The music can be heard and the background vocals but not the lead singer. Weird. iphone is 2 yrs old--model # MC922LL/AThoughts?

    First sync--refresh--podcasts you've subscribed to so they download to itunes.  Then click and drag each one to you own ipod.  Then will sync (if you have it set to sync) with your ipod and download to it.  You erase them from the ipod through itunes also.

  • Upgraded to IOS 7 when I put my headphones in it gets all crackly and I can't hear the voice but without headphones it works just fine

    When I put my headphones in it gets all crackly and I can't hear the singing but when there's no headphones in it works perfectly fine

    It could be bad headphones. Try another pair. It could be gunk in the headphone jack. Try cleaning it out. It could be a bad headphone jack. Make an appointment at the Genius Bar at your local Apple Store.

  • I can't hear music/sound through my headphones.

    Hi
    Basically. I have the iPhone earbuds.... when I plug them into my iMac I can hear Skype calls through them no problem. If I turn iTunes on and play music... I hear nothing. If iTunes is playing when I answer a call, I have my conversation and end the call... the music plays briefly through the earbuds then stops. I can't hear anything through them except when I'm having a skype conversation.
    I am currently running osx Maverick. This wasn't a problem before, but now that I have updated, it's happening and it's really frustrating. I also option clicked the sound icon in the bar and it's showing my headphones are connected. Please help?

    I figured it out.
    When you plug them in, you have to adjust the volume directly from the headphones or you don't hear anything. So use the little control on your apple headset and the sound will work. I feel like such an idiot for not figuring that out sooner *facepalm*

  • Can still hear sounds even with the headphones plugged in.

    When I plug my earpiece in you can still hear it. Its not the earpiece cause I've tried a few.

    First thing to consider is whether you have the plug all the way in. When new, it can be a little bit of a tight fit and fairly easy to not have it fully engaged.

  • Can only hear guitar in right speaker/headphone...

    How do I record/playback the guitar in both speakers? I'm connected with an M-Audio Fasttrack. Is there something I have to do with the stereo/mono options on the Fasttrack or GB? Something to do with echo/reverb? Thanks!

    Stereo is two signals, one being sent to each channel (left and right). Mono is one signal being sent to both channels (left and right). A mic sends a single signal, hence the mono setting.

  • Can't hear the microphone

    Hi, I purchased a Speed Link USB microphone (http://www.play.com/PC/PCs/-/676/883/-/5983672/SPEEDLINK-SL-8709-Pure-Voice-Micr ophone-II-USB/Product.html?searchtype=genre). In the system properties, the device is recognised and when I speak into it, the volume display changes accordingly. However, I can't hear my voice through the headphone output. I am able to hear other audio through the headphone output, such as music from iTunes.
    This device also has output, and I can hear output through this device, just can't hear input.
    Any ideas?
    Cheers
    Robbie

    I'm using a mic that is pluged in to an ozonic firewire Audio inter. I currently can't hear my voice through my phones but it does record, all this using GB.
    Select the track and turn on "Monitor" in the right column of Garage Band.

  • When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

    When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

    I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

  • I have an i pod and am having problems with sound. When I watch any video on the device with headphones the music is always too loud for the voice meaning i can't hear what is being said. This problem is accompanied with a buzz in some parts of the music.

    When watching a video with my headphones the volume of speech seams very low even when i adjust volume. The speech also tends to make a humming sound in places. When I listen to music humming is sometimes transmitted, but the volume level is normal. The problem is that when the video is playing i can only hear music and humming with the voice too quiet to hear properly. How can I make both volumes balanced? Also. This happens in all music videos.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Can't hear my caller after I remove my iphone headphones

    Has anyone else had this problem?
    you are listening to your music using th iphone headphones, then you remove your headphones from the iphone, when you get a call you can't hear the caller and they can't hear you. I discovered that the only way to fix this problem is to re-insert the headphone and click the mute button on the headphone! It seems that when you use the headphones and click mute and then remove your headphones it remains stuck on mute, not allowing you to be heard on an outgoing or incoming call!!!!!
    What's up with that this? is my second iphone and it has happened to both my phones. It's a good thing I had my headphones with me, otherwise my phone would be useless or worse yet if it was an emergency I would not be able to call 911!

    That is the solution so far other than a restore.
    FWIW It worked with a Belkin audio cord as well. I tried it a few times in and out with no luck.
    Here's what worked for me:
    1. Start ipod and pause on a song.
    2. Insert cord or headset.
    3. Hit play.
    4. Hit Pause.
    5. Remove cord or headset.
    6. Hit play....
    After (6) it didn't do much but then I noticed the volume slider grab a life of its own. When it settled down... all was working again.
    What a pain in the rear.
    Apple if you reading this fix it. I happened to get stuck at work after listening to music the night before... when I tried to make a call, guess what. All day without audio.
    Brutal!

  • Iphone 4 during a call can't hear or be heard. But I know both the speakers and the phone call mic work fine.

    I bought an iphone 4 and have been having multiple issues since the moment I got it. My biggest issue when I received it was that the noise cancellation mic didn't work. I sent it back to the people I bought it from to fix it and they fixed the other mic but not the noise cancellation mic. So I know that one doesn't work with apps, speaker phone, that sort of thing. I've been just dealing with it and using headphones with a mic on them.
    Well once I put my sim card in and had to go through a huge debacle with AT&T to do it, I got a phone call and I couldn't hear anyone and they couldn't hear me. I tried switching it to speaker phone and using my headphones and still nothing. I first tried factory reset and network reset and it didn't do anything. So I tried the fix where you put a piece of cardboard in the phone and the other fix where you loosen and then re-tighten the grounding screw. Now I can hear the other person but only on speaker phone, the call is choppy, but I can hear them so progress! They still couldn't hear me. However, when I took the call off of speaker phone it was back to dead silence. I tried putting in my headphones to see if they could hear me, they still could not hear me even with the headphone mic. I'm not sure what else I can do!! I know the speakers and mic work because I listen to music and play games and I hear those and when recording on voice memo the mic and playback work fine.I also know that it isn't any issue with signal because it happens where ever I am, low signal or all 5 bars! I guess I'll try cleaning them and try putting a thicker piece of cardboard but I don't expect those to work. If you can help with any suggestions at all please let me know! I have been having the worst luck with this phone and i'm getting absolutely fed up.

    Hey there RJOBoston,
    Take a look the article below, it provides troubleshooting tips that should resolve the issue you’re running into with not being able to hear or be heard on calls.
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    Cheers,
    -Jason

  • HT1386 My Itunes on my laptop will no longer sync any podcasts or audiobooks to my mini Ipad, and my Ipod as well. After I sync and try to play a podcast on both I get the following podcast is temporarily unavailable! I can downld on ipad and it works,

    My Itunes on my laptop will no longer sync any podcasts or audiobooks to my mini Ipad, and my Ipod as well. After I sync and try to play a podcast on both I get the following podcast is temporarily unavailable! I can downld on ipad and it works, I just did a disagnostics check, and I get there error Secure Link to Itunes has failed? *** over >? anyone thank you

    Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
    $19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

Maybe you are looking for

  • How do I get rid of the question marks?

    All my thumbnails have question marks in the upper corner.  These pictures do not load.  In fact, I get an error message (file not found) for each one.  So far, I have no pictures to log in with.  Any suggestions?---Doc

  • Runtime exception in workflow

    We have used the BLOCK task type in our workflow to catch all runtime exceptions. I want the exception details (that gets thrown automatically by the system at runtime) to be sent as part of a notification/mail task type to our administrator. 1. How

  • Verizon rip off

    I have been with Verizon for 15 years. Att comes up with a great plan 160 per month. Verizon wants you to purchase all new phones at retail price to get this type of offer. do you not think this is a total let down to its current customers. Its bad e

  • Web Dynpro Tabstrip

    Hi I have a Tabstrip which contains a ViewContinerUIelement. I have embedded an interface view from another web dynpro component to the tabstrips ViewContinerUIelement. The interface view is a view set with 2 cells. cell(1,1) has one view (navigation

  • HT204017 Issues downloading and updating since the update of Yosemite v10.10

    Hello I'm hoping someone can help me since downloading the new OS update i haven't been able to update or download through the app store. i can however download through my browser but not the app store. i first noticed when an update came up for iPho