Can't hear my ringtone?

I turned off my iPhone 4s ringtone while on my flight to CA and changed to airplane mode . When I got off the plane, I switched airplane mode off but my phone won't ring now. I checked the volume and made sure airplane mode was off, made sure I had selected a ringtone. The SOUNDS setting says SILENT in the grey top left of the Sounds screen but I don't know how to change this.  Any suggestions?

is the switch to the side of the phone up or down? can you see orange?

Similar Messages

  • Can't hear specific ringtones in my bluetooth

    I have a Blackberry Curve, Sprint is the provider.
    Bluetooth - Motorola H710
    I have downloaded (3) specific ringtones (Rock-n-Roll songs) to assign to specific contacts. I can only hear the specific ringtones coming from the Blackberry, I can't hear them in my bluetooth at all. I hear a standard ringtone coming from my bluetooth for every phone call.
    I used to have a Motorola I880 and I had no problems hearing the specific ringtones with my bluetooth. I want to hear the specific ringtones in my bluetooth again with my Blackberry. Any way to fix this?
    Question #2 -
    Also, is it standard for the ringtone to always ring thru the phone even when you are wearing your bluetooth too?

    Can anyone help me with this????

  • I calling people but I cant here a ring tone, they answer but i can't hear them when they answer. If they ring me when I answer I can't hear them  . I have tried to reboot but has made no difference.Any help will be appreciated

    I need help
    Suddenly when I call people I can't hear a ringtone, I can see the call is connected, but I can't hear them.  If they ring me I connect the call but I can't hear them.  I have rebooted, but it made no difference.  Any suggestions please

    Hello Jeff,
    Thank you for providing so much detail about the issue you are experiencing with the audio on your iPhone.  I would be concerned too if the audio on my iPhone was not working unless using speaker phone.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speaker
    http://support.apple.com/kb/TS1630
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids.  Any solution?

    I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids.  Any solution?

    Did you get any answers?

  • How can i improve ringtone on my Iphone 3Gs i can hardly hear it

    I have two Iphones 3GS and on mine i can hadly hear when someone calls me i try defernt ring tones any sugestions?

    I assume you have configured Settings -> Sounds ->" Ringer and Alerts" to maximum, and you have "Change with Buttons" set to "Off"
    You can download Apps that offer different ringtones, many for free, or the first couple of ringtones for free.
    You can Google Ringtones, and find various web sites offering free ringtones.  You can generally sample the ringtone on-line and then follow the instructions for downloading and installing on your iPhone.
    What you are looking for are ringtones that have a penetrating sound that is difficult to miss, especially if the iPhone is in your pocket or bag.
    I've found some piano sounds and Jazz Saxophone sounds can be heard quite well.

  • HT201401 When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't h

    When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
    - During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
    - With the headphones, everything is ok!
    - I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
    I don't know what is problem,because the speakers work.

    Hello jam5064,
    We've an article which provides tips that can help get your iPhone working correctly.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • Alerts volume is good but ringtone volume is so low I can't hear it ring-any way to fix this?

    The volume for my alert sounds for things like text messages and new voicemails is great and I can hear it and adjust it like normal but when I go to the ringtone sound option the volume is so low I can't hear my phone when it rings unless I have the volume up really high but in doing that my alert sounds are super loud and not usable at that volume in any sitting private or public.  I have my software up to date and have not damaged my phone or caused this problem myself in any way.  Does anyone else have this issue and is there any way to fix it?  It's very annoying and counter productive when I miss calls from clients or family.  Thank you for any help!

        Well this seems to be a little odd, mcookie!
    We don't want you missing any important phone calls from family, friends or clients. If you go into settings, Sounds, is the volume up at a decent level? If you change your ringtones does the sound seem any different in volume? Another step I would try is; Settings, General, Reset, Reset Network Settings. Keep me posted on these steps.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • My iphone 4 the buttons at the side r not workin which means it dosnt go off slient .. but when my earfones r in u can hear everyfing when some1 rings me a can hear the ringtone any1 no how to fix it???

    my iphone 4 the buttons do not work on the side which means its always on slient... but when my earfones r in a can hear everyfing when some1 rings me i can hear the ringtone can any1 help

    can some1 help plz

  • Sound ID A2DP Problem - Can't Hear Ringtones, Alerts, Sounds in speaker

    I just bought a Sound ID 510. Can't review much yet, but it's comfortable as ****.
    Anyway, I upgraded the firmware so that I can use the A2DP. Well, it works...sort of. I mean, I can listen to music through it just fine. However, once the AD2P is on, I can't hear ANY sounds from my iPhone 4, except via the headset. I don't wear my constantly, and so that means my phone is effectively silent. Ok, so that's not such a big deal. I'll just turn the A2DP off when I'm done with it....well, that works, EXCEPT when the phone connects to the headset, it automatically goes into A2DP mode and then I have to open the iPod app and turn it off.
    Are there not any other A2DP controls on the iPhone 4? This *****. If I can't fix it, I'll downgrade the headset and go without the A2DP, or I'll just return it.

    I recommend you check that the phone is not set to silent mode. The silent switch is on the left side of the phone. When set to silent an orange dot is visible. Verify your sound settings in the settings menu. Raise the volume using the up/down volume buttons on the left side of the phone. Then reboot the phone if that doesn't help.
    Are you using headphones? Bluetooth adapter?

  • I am using itunes version11.1.3.8 and an iphone 4s version 7.0.4. Is there any way that I can create my own ringtones as I had done in the past? Thank you.

    I am using itunes version11.1.3.8 and an iphone 4s version 7.0.4. Is there any way that I can make my own ringtones? I have always done so in the past (Android). I much prefer to hear my songs when someone calls. Thank you.   

    I have tried to follow all the steps correctly. I presently have on itunes 2 entries:
    1. song.m4r with this highlighted on info screen but song location.m4a on summary screen. I have enetered "OK" several times.
    2. song no suffix on info screen but song location .m4r.mp3 on summary screen
      After syncing I then go a contact and edit it. Trying to change ringtone does not give me an option for the ringtone that I created only those that were preloaded. Is there something that I need to do here? The ringtone (at least one of them) does appear in my song  list and I can play it. I don't know how to check for its properties on the iphone.
    I do not have an itunes created entry on the sidebar for ringtones (I did create a playlist myself).

  • Can barely hear incoming call?

    Can barely hear an incoming call.  Sounds very distant.  What can I do to resolve this?  Thanks

    Dear Deborah, I just received my latest iPhone, iPhone 4S and I am experiencing a similar problem. For a hard-of-hearing person this problem might be too much. I have not reset my new phone yet but I am going to do so soon. I will see what happens.
    Another question: How about those ringtones? The iPhone seems to reset itself to the default ringtone constantly eventhough I have put individual ringtones to my contacts. Any ideas how to solve this one?

  • How can i change the ringtone for different contacts.  "edit contacts" won't let me`??

    how can i change the ringtones for different contacts on the razor.  "edit contacts" wont allow me to

    Here is the Instructions your Looking For:  Down towards the Bottom of the Instructions shows how to set Ringtones for each Contact.
    How do I download and use ringtones on my DROID  Razr & RAZR MAXX?
    Quick links
    Set any of your songs on your SDcard as a phone ringtone
    Choose Phone ringtones through settings menu
    Customize the text message ringtone
    Assign a ringtone to a specific contact
    Download ringtones from Play Store      
    1. Set any of your songs on your SDcard as a phone ringtone:
    Touch Apps > My music
    While the music is playing, touch the phone Menu Key > More > Use as ringtone 
    The ringtone is set as your default incoming call ringtone and copied to your Phone ringtone list.       
    Note: The above instructions are for the My music player and not for other players such as Play music.      2. Choose Phone ringtones through settings menu:
    Press the Menu key
    Touch Settings
    Touch Sound
    Touch Phone ringtone  (If option is greyed out, make sure handset volume is not set to Silent Mode)
    Select a Phone ringtone from the list. Press OK to set. (Music files you have set as Incoming Call ringtone from your SDcard will be included in this list along with downloaded and preloaded ringtones.
    3. Customize the text message ringtone
    From the homescreen or from within the applications tray, touch Text messaging
    Press the Menu key (On the left with 4 squares)
    Touch Messaging Settings
    Touch Select ringtones (if option is greyed out, make sure Notifications is turned on / actived)
    Touch on any Notification ringtone to select and hear a sample.
    Press OK to set as notification ringtone
    CLICK HERE for instructions on creating your own custom ringtone for Text Messages
    4. Assign a ringtone to a specific contact:
    Press Contacts icon on homescreen or tap on Contacts application from the Applications Tray
    Touch and select the specific contact
    Press the menu key
    Touch Options
    Touch V (down)  icon next to Ringtone
    Choose a Phone ringtone from the list and tap OK to set.
    Note: To assign a music/song from your memory card as a ringtone, first follow step1 above and follow step 4 again. 5. Download ringtones from the Play Store
    From the applications menu, touch Play Store
    Touch search  to search for ringtones.
    Answers others found helpful
    How do I setup and use Bluetooth on my DROID RAZR MAXX?
    How do I transfer files to/from my DROID RAZR MAXX?
    How do I set up and use the Smart Actions application using the DROID RAZR MAXX?
    How do I use the DROID RAZR MAXX for video chat?
    How do I force my DROID RAZR MAXX to reboot or restart?

  • Can't hear phone calls/button sounds or use speaker phone lg extravert

    I tried to make a phone call but can't hear any ringing, the call goes through but nothing happens. My volume for the earpiece is at maximum and so is the main volume on my phone, I can't hear the button sounds either. If I hit the play button, I can hear the ringtone it plays for volume check and it will also play the power up and power down tones. I tried to use speaker phone, but when I touch the button it won't work. I took the battery out and that did not help at all. I also reset my phone, and that also did not help. I checked my alarm setting since I use that frequently and it works just fine too. I am extremely unhappy because I had this phone replaced in August because the camera stopped working and now it looks like I'll have to do it again but out of warranty.

        @ceasonly
    I'm glad you still have some way to hear the audio on your phone, but let's get that speaker working! The most common reason for the phone's sound to stop working would be the switch on the side has been nudged accidently. Try to enable then disable Silent Mode http://bit.ly/Xhs40k to get the volume working again. Also, try to simply restart your iPhone by holding the power switch and home button together for 10 seconds. Nothing gets erased but it helps cleat out any temporary glitch your phone may experience.
    If you're still having trouble, the next best step would be to reset the phone's settings http://bit.ly/HWRbPl. This does erase information from your phone, so make sure to back up http://support.apple.com/kb/HT1766 your iPhone information first.
    Keep me posted if you continue to have audio trouble.
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • Can't hear my 8830 ring with incoming calls

    I've checked my settings to make sure it 's on "tone" and loud with my ringer, and ensured it was not on mute. However, whenever my phone rings, I can't hear it, no sound comes through. I've been missing lots of calls the last couple of days cause it rings with no audio.

    Hi prchick06,
    Have you already tried reinserting your battery and switching ringtones as a test?
    If so you could also try clearing the profiles database as shown in the KB article below:
    http://www.blackberry.com/btsc/KB10167
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Can't hear audio in trim mode.

    When I'm in trim mode and I play, in order to move the cut, I can't hear any audio.  It has nothing to do with scrubbing on/of because pressing shift+s has no effect.  It's also not working when I'm holding down "K" and pressing "L" simultaneously.
    DrL

    works for me.  Have you looked in the view menu to make sure audio scrubbing is checked?  It's possible you've reset the keyboard shortcut or your keyboard has somehow or other gotten corrupted.  You might try deleting your fcp preferences.  Use this:
    http://www.digitalrebellion.com/prefman/

Maybe you are looking for