Can't Hear Myself Recording (In Adobe Auditi

I have the USB Sound Blaster External Soundcard.
When I open Creative Smart Recorder, it records me perfectly, and I hear myself, and successful playback and everything.
But when I try to record in Adobe Audition, I hear no sound results from my microphone when I try to record myself.
What's the problem? I tried to mess around with the settings (if those are the right ones), and Adobe Audition is perfectly fine, and my Sound Blaster software was just installed a few minutes ago.
I'd appreciate some help.

someone please help!!!!

Similar Messages

Can't hear myself record???

I assume there is a simple solution to this problem.
Levels are fine in the Inspector. . .and the track is armed. . .but I can't hear myself when I am recording. . .only on playback.
Please help.
Thanks.

If you're running through Logic's audio engine with a 256 buffer setting you are experiencing latency although it may not be noticeable to you yet. Most experienced vocalists have problems with a 128 buffer and don't feel comfortable until using a 64 buffer setting. This is because they hear their voice in their head (absolute 0 latency) so any delay through the phones is easily perceived.
The easiest way to hear latency would be to set your buffer to 512, if you're using a guitar to test you should be able to hear/feel the difference between the time a note is plucked and the time the sound appears, use higher notes 7th - 9th frets on the high b and e strings, make sure the guitar is resting against your chest so you can feel it's vibration.
I learned this stuff over a long period of time, I had a MIDI studio synced to 4, later 8 track reel-to-reel tape machines in the mid 1980's, using Yamaha hardware MIDI sequencers and later computers, think I moved to computer sequencing in 1988. At one point I had PC, Mac, Atari and Amiga computers setup to be compatible with an international distribution company I was doing tracks for. Final product had to be available on all four platforms. Later worked for PBS doing tracks for the science related productions. (thank you Roland analog synths) I've also worked as a performing and studio musician for 40+ years. So yes, I'm a MIDI geezer!

Can't hear myself record with Apogee Duet in Logic

i have input monitoring on but don't hear anything through my mic. I'm getting signal but i can't hear myself through the headphones. am i missing something?

Have you checked in the maestro software (mixer) that you have turned up the fader on the channel you wish to monitor on, and that the monitoring fader in Maestro is not set to 'none' (sorry, don't have maestro here to check), Also check you do not have the headphone output set to mute in Maestro.

Can't hear myself talk - No mic playback - HS 1000 headset

I have a Creative Fatal1ty HS-1000 USB headset and I can not hear myself talk into the microphone. I have emailed tech support for the third time and they keep referring me to their help articles on the website but it doesn't help.
I have no option in the windows volume control to turn up or un-mute the mictophone in playback control.
Here's a screenshot...

I have the same exact problem. I also have XP.
I found the mic volume slider, it's the "Volume" button in the voice recording section. I have it turned all the way up, but still get nothing.
I installed all the latest drivers, Control Consoles, etc etc.
I was pretty much ready to give up.
Update: The microphone can be removed. It pulls straight out. That means, it may not have proper contact.
That was the case for me. I put it back in, and must've gotten it just right, because now it works. I guess the contacts are a bit touchy.
Anyway, If you're out there and getting nothing from the mic test, this may be your problem.

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

How can I listen to my vocals while I record in adobe audition 1.5?

I used to be able to just got a new computer had to reinstall.

See this identical thread:
Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

Can't hear monitor / recording from mixer

I'm running three mics and a direct feed from a pre-amp into a Yamaha mixer and then from the mixer to the MBP using Garage Band purely as a recording device.
But I can't hear the mix that the Mac is recording.
Never used GB08 before.
Help! (Band goes on in an hour or two.)

Thanks!
(Part of the problem was that I was using a friend's BOSE headphones and he hadn't mentioned they have to powered on separately. Ok, that was dumb.)

I can only hear my record enabled track when recording,not when just playing

This has to be a simple one - normally I can hear my record enabled track when playing back or recording but suddenly i can only hear it when I am actually recording. I must have accidentally selected an option i am unaware of - can someone please help!
Thanks

In case anyone is also stuck I went to Options->Audio where there is an Auto Input Monitoring option. I turned it off and it fixed my issue.

LogicX Rec Problem. I can't hear while recording no matter I turn on Auto Input Monitoring at menu or channel. On certain songs I could thru AUX to REC, my L7/8/9 procedure. Now, inconsistent, not work. Any help?

Logic X Recording Problem
I can't hear (ex.) voice back while recording no matter I turn on Auto Input Monitoring at Record Menu or Channel Strip.
On certain old projects I could when thru AUX to REC, which was my L7/8/9 procedure.
Recording takes place on a consolidated session, all audio tracks with no latency, which actually happens only it can't be heard.
Monitoring is very inconsistent and in fact doesn't work at all. Any help?
Mac Pro 2010 2x2.66 12 Core 32GB OSX 10.9.5 SSD 480
Recording on HD 1TB, Fireface 800

Correction: actually "thru AUX to REC channel" is not effective.
It's just that I can input monitor thru an extra AUX channel independently of the REC channel.
Sending the source to be recordered to aux and audio rec at same time.
Mac Pro 2010 2x2.66 12 Core 32GB OSX 10.9.5 SSD 480
Recording on HD 1TB, Fireface 800

New iMac...trying to set up sound recording form the internet but my microphone isn't working for facetime. I have soundflower installed...recording into Adobe Audition. Can't seem to get them all working...any help?

I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows. Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
I've installed soundflower but now the micropohone is not working in facetime. What is the proper way to set all this up?
Thank you!
Frank

O.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back

How can i hear myself when I record vocals?

I'm using Garageband 1 with a Duet Pre-amp.

Here's an example:
http://www.oracle-base.com/articles/misc/populating-master-detail-fks-using-sequences.php

I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match. How do I correct this?

I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match. How do I fix this?

I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.

The fan on my G5 is so loud I can't hear myself think! HELP!

every so often the fan (i think it's the fan) on my g5 turns way up and it's so amazingly loud. i don't know why it does this or if there's any fix...what i do know is that in the last week it has happened more frequently than normal and today it has been revving for the last 3+ hrs!
is this a problem a lot of people face and is there something i can do to troubleshoot?
Jeremiah

Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
In the meantime, try the following:
http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).

I don t hear the track in adobe audition CC - non sento la traccia in adobe audition cc

come faccio?
come faccio a resettare il programma?

Resetting everything probably won't help. If you load a file and try to play it, does the cursor move? If it does, then you have a connection to your sound device, but the output isn't correctly routed to or from it. If the cursor doesn't move, then you don't have a proper connection to your sound device, and you will have to reselect it in Preferences>Hardware.

How can I hear what I'm recording in CS5.5 ?

Everything is working when I'm playing recorded files.
But I can't hear anything during recording ?
How can I monitor my recording in Adobe CS5.5 ?
gr
Danny

This is essentially a Mac problem, about which most of us know very little, because we use PCs. The ususal solution to monitoring is to use headphones to monitor an input directly, and if you do that in a PC then you have to set it up - probably the same in a Mac. Unfortunately your Presonus Audiobox doesn't have a headphone socket, which would probably make things easier - usually there's an app that comes with most devices of this nature that will help you with monitoring, but without a headphone socket on the box... not a lot of point!
Hopefully one of the developers might know the answer - they usually turn up at some point, on a fairly regular basis.

Can't Hear Myself Recording (In Adobe Auditi

Similar Messages

Maybe you are looking for