Can't hear Realplayer or Quicktime

Stand alone & plug-in don't work
But i can hear itunes.

auhlixer.the info in this link might help..
http://docs.info.apple.com/article.html?artnum=300832
dave

Similar Messages

QuickTime 7.3 - no audio on .avi file (I can't hear audio)

Hey Folks,
I can't hear any audio on the .avi file - I downloaded DivX player and I still do not hear any audio... A message will pop telling me I need to download the components but I have no idea what I need to download..
Here's the error screenshot: http://i16.tinypic.com/6z3ubkp.png
And here's the URL it brings me to when i click continue: http://www.apple.com/quicktime/resources/components.html?os=OSX&ctype=61646563&c subtype=6d732000
Kindly let me know.
-joey

Here try this component for Quicktime to open avi's, Perian.
http://perian.org/#download
You need at least OSX.4.7
You should remove the DivX component. Read from the site what other components you need to remove.

ITunes 7.3.1 - I can't hear anything!

I upgraded to the new version of iTunes the other day and since then, when I've tried to play a song, the counter still goes like the song is playing but I can't hear anything. I can still hear the sound effects on my computer and I tried playing a movie on QuickTime and the sound works on there fine so it must be iTunes.
Anyone know what's going on?

Some have solved the problem by starting Garage Band.

Can't hear audioo

I can't hear any audio on my Quicktime videos, or any audio from streaming videos. However, iTunes and such works fine. Help!

Open the Audi MIDI Setup app (in your Utilities folder).
Set the default audio output to 44100Hz and try the files again.

Can't Hear Videos, but i can hear 'em?

i have a video on my ipod that i can see but i can't hear. whats up with that?

"Can't Hear Videos, but i can hear 'em?"
Eh?
Quicktime doesn't play "muxed" video files properly. It only plays the video and not the audio.
You need a 3rd party converter such as Videora, or MPEG Streamclip to convert the video file.
The file must meet the following specifications to play correctly.
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats.
-or-
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats.
Incidentally, the iPod video forum is here.
http://discussions.apple.com/forum.jspa?forumID=808
This forum you are in now is for older iPods. : )

Rendering & Playback issues + can't hear audio when editing videoclip

Hi,
I have two issues.
#1: While editing my video, is there a way I can see the video and hear the sound at the same time? I've been trying to edit a video with no sound... very difficult to place a background for example at a specific time when I can't hear my voice, I can only see the video.
#2: After rendering, when playback in Quicktime for exemple, I can hear the sound but no video is playing. Why is that?
Thanks

Dont know why the last print screen is blury but it says:
Fomart: Windows Media
Output Windows MEdia Video 9
Include : Project Link
Output Audio: On
Post-Render Action - none
Channels: RGB
Depth: Millions of colors
Color: Premultiplies
Final Size 640x480

I'm lost! How can I hear my music?

Over the years Logic has increased in complexity faster than I can keep up. I have music files that I've been working on but I'm not able to hear the results. Something in the Environment, or a simple computer preference setting, or God only knows what. I can't dig through all the documentation; I get totally lost. Years ago I was using an external sampler, with good results, but I've never been able to get my arms around the EXS-24 or the other soft synths built into the iMac. I think what I really need is someone to come to my site and set me up. Anyone have any ideas?

Well put.
If you exported a track as Audio & QuickTime could play it, that means that Logic can definitely access the material correctly (otherwise it wouldn't be able to generate an Audio track).
If that is the case, then your problem must be monitoring.
IOW, everything is probably working perfectly correctly, except that somehow you have turned monitoring off (& so you can't hear playback).
I suggest you check out the monitor settings to see if you haven't disabled playback monitoring…
FROM THE MANUAL:
(N.B.: there is a problem with the text in both the paper & PDF versions of the manual. I have therefore pasted the text verbatim, but it doesn't make sense. I've left it 'as is' so that you can decide for yourself what is probably meant.)
Auto Input Monitoring
Input monitoring allows you to determine what signal is heard on record-enabled
tracks. If Auto Input Monitoring is switched on, you will only hear the input signal
during the actual recording—before and afterwards, you’ll hear the previously
recorded audio on the track, while the sequencer is running. This helps you judge drop-
in and drop-out points for punch recording. If Auto Input Monitoring is switched off,
you will always hear the input signal. Auto Input Monitoring, when switched on, also
allows you to hear the input source when Logic is stopped, making it easy to set levels.
No monitoring of any kind will occur if the Audio > Audio Hardware & Drivers > Software
Monitoring (see “Logic automatically recognizes any installed Core Audio hardware, and
will use the default settings—defined in Mac OS X’s Audio MIDI Setup utility
(Applications > Utilities > Audio MIDI Setup). It can, however, be advantageous to
optimize the settings for your individual hardware setup, particularly if you use several
sound cards or a multi I/O card. This can be done in Logic’s Core Audio pane.
Input monitoring always involves a little latency. In certain configurations, you may be
best served by not using Logic’s monitoring at all, to obtain the best possible monitor
timing. Route the signal that you wish to record directly to the headphones or
monitoring amplifier. You won’t unknowingly overdrive your A/D converters, as Logic’s
input level meters will continue to work, and you’ll see a warning dialog as soon as an
overload occurs. Latency is entirely dependent on the hardware, and driver settings.
Switching Auto Input Monitoring on/off
Click-holding the Record button (Transport window) opens the Record menu, where
you can toggle Auto Input monitoring. You can also use the Toggle Auto Input
Monitoring key command, or enable it from the Audio menu.
Possible Problems with Input Monitoring
Typical problems that can arise with record-enabled tracks:
• Singers cannot hear themselves while Logic is running. All they can hear is the old
recording. Switch off Auto Input Monitoring.
• The track cannot be heard, even though Logic is not actually recording. Switch on
Auto Input Monitoring.
Depending on the situation, both options can be useful. Normally, Auto Input
Monitoring is switched on, and is only switched off in special situations.

Can't hear my audio clip when i play back my video. Why?

I recorded an audio file in QuickTime, moved it to iTunes, then imported it into iMovie. Then I dragged it to the Project area, under my video clips but you can't hear it when playing the clip. What am I doing wrong?

Well, in the "System settings" menu I have these options:
Default imput: Built-in microphone Default Output: Built-in output
Built-in input System Output: Built-in output
(In neither of the imput/output menus I see built-in audio.0
In the "Properties For" menu immediately below the "system settings" menu I get the following three options:
Built-in Microphone
Built-in Input
Built-in Output
(No "built-in audio" option either in this case.)This menu is currently set to built-in microphone, and I just found out that if I set it to built-in input, the audio output below appears 'output not supported' and greyed out, and if I set it to built-in output, the audio input below appears not supported and greyed out, whereas the audio output now appears to be supported. How come? It seems that I cannot have both at the same time. Is that normal?
One more thing: I don't know if this is important, but I think I most probably is:Whenever I start Logic Pro in my computer a dialogue box appears warning me that "The previously selected audio interface is no available" and that "The built-in audio inputs and outputs of the computer will be used instead for this session."
Thanks again Caramby!

Help please! I can't hear my friends

I can go into a video chat and see my friend and he can hear and see me but I can't hear him! All I can do is see him. He does have a microphone on his camera and its on. Still no sound from him Yes my camera is plugged in correctly and my speaker all the way up but I can't hear anything he says. I'm working off my AIM account. Can someone help me please?

Hi Suzanne,
Welcome to the Apple Discussion Pages
First At both ends go to the iChat View menu.
Make sure the Show Video Status and Show Audio Status items are ticked.
Next go to the Video menu (Audio on Mic only computer) to the right of the Buddies menu, and make sure Camera and Microphone are Enabled (ticked).
In System Preferences > Sound >input tab, make sure Microphone you want to use is selected and the volume adjusted to repond over halfway.
Next go to iChat menu > Preferences > Video > Microphone drop down and make sure this matches the choice above.
In the same Section make sure the Bandwidth Drop down is set to NONE.
Back to System Preferences, this time Quicktime > Streaming tab.
In the drop down make sure the speed matches the download speed you (both) have.
All these have a direct or indirect influence on the success of the Audio part of the chat.
Ralph

I can watch music videos but can't hear them?

I can watch music videos on ITunes on my PC (Windows 7 Pro 64 Bit) but after a few bars of sound, I can't hear any more? I've had this happen some time ago, and someone helped me out. I've forgotten how .......please help?

Hello Gary,
Thank you for the details of the issue you are experiencing with audio playback when playing videos in iTunes. I found a couple of article with some steps you can take to address the issue you described.
I recommend reviewing the following articles:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Thank you for using Apple Support Communities.
Best,
Sheila M.

ITunes : I can't hear any voice when I play videos, can you?

I'm currently using iTunes as a song/movie/video player.
When I play songs, it seems fine n' the sound is good.
But it doesn't seem so with the videos.
I can't hear any voice coming out when I play movie or video files.
But I can hear it perfectly when I play them in my iPod!?
Every movie and video files are converted to '.mp4'
Is this has anything to do with my problem?
I don't know what's wrong with my iTunes
Any ideas?
Thanks'' :):)
iPod Video Windows XP

hiya!
I can't hear any voice coming out when I play movie or video files.
But I can hear it perfectly when I play them in my iPod!?
hmmmm. okay, let's first try a careful standalone QT 7.0.4 reinstall.
download and save a copy of the QT 7.0.4 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.0.4 Standalone Installer
if that install goes through okay, do you get sound with your videos?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

I can't hear any audio in imported clips!

The video clips were originally MPEG, then I converted them to MOV (at least I think) in QuickTime Pro. When I imported the movies into iMovie, I can't hear any audio. Please help! Thanks so much.

The video clips were originally MPEG, then I converted them to MOV (at least I think) in QuickTime Pro. When I imported the movies into iMovie, I can't hear any audio.
If the source files were "muxed" (MPEG-1, MPEG-2, VOB, etc.), then this is normal. QT applications (like QT Pro, iTunes, iMovie '06, GarageBand, etc.) cannot convert "muxed" formats and retain audio. In this case use an MPEG-based, third-party utility like MPEG Streamclip (free), FFmpegX (donation-ware), Visual Hub (pay-ware), etc. for your conversions. (NOTE: MPEG Streamclip requires the QT MPEG-2 Playback component be installed for the conversion of MPEG-2 content.)

I can see and hear her, but she can only hear me. HELP!

I can see and hear her, but she can only hear me when we iChat each other.

Hi,
HAS she for any reason Installed Perian 1.0.3 ?
It is a System Preference Pane that adds several Video Codecs to Quicktime
See this Users Tip
http://discussions.apple.com/thread.jspa?threadID=1994557
10:42 PM Thursday; May 21, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Aoss and skype : can hear rings can't hear talk

Hi, I'm trying to use aoss with skype like suggested on the skype forum, so I can have software mixing.
I have dmix enabled and working and aoss works great with realplayer.
When I run "aoss skype" it does ring if someone calls me and I do hear the 'click' when I hang up but I can't hear anyone talking and they can't hear me talking. I tested it both with a friend and with echo123.
I'm using snd_intel8x0 model and using all the current packages.
And I'm using the regular arch setup, no costum .asoundrc or something.
Does anyone know a solution for this or have similar problems?
Thank you,
Grey

Greycloack wrote:
Hi, I'm trying to use aoss with skype like suggested on the skype forum, so I can have software mixing.
I have dmix enabled and working and aoss works great with realplayer.
When I run "aoss skype" it does ring if someone calls me and I do hear the 'click' when I hang up but I can't hear anyone talking and they can't hear me talking. I tested it both with a friend and with echo123.
I'm using snd_intel8x0 model and using all the current packages.
And I'm using the regular arch setup, no costum .asoundrc or something.
Does anyone know a solution for this or have similar problems?
Thank you,
Grey
I have the same problem too

Netflix LA - I can't hear spanish audio in some movies

Since the last update, days ago, I can't hear the Spanish language in some of the Netflix Latin America movies, but if I play the same movie from a computer, I can hear the audio in Spanish.
This is a problem with the last firmware of AppleTV.
Please help me.

The video clips were originally MPEG, then I converted them to MOV (at least I think) in QuickTime Pro. When I imported the movies into iMovie, I can't hear any audio.
If the source files were "muxed" (MPEG-1, MPEG-2, VOB, etc.), then this is normal. QT applications (like QT Pro, iTunes, iMovie '06, GarageBand, etc.) cannot convert "muxed" formats and retain audio. In this case use an MPEG-based, third-party utility like MPEG Streamclip (free), FFmpegX (donation-ware), Visual Hub (pay-ware), etc. for your conversions. (NOTE: MPEG Streamclip requires the QT MPEG-2 Playback component be installed for the conversion of MPEG-2 content.)

Can't hear Realplayer or Quicktime

Similar Messages

Maybe you are looking for