Can't hear recorded voive memo

hello. i've recorded today 5 voice memos. i can hear only 4 of them. i can see the lengh of this voice memo , the time of the recording and everythig, but when i press the "play" button i can't hear anything. all the rest of the memos i recorded today are playing and i can hear them. what can i do?

I have this same problem as well have you found a solution to it?

Similar Messages

  • Can't hear recorded sound during video playback

    I take a lot of videos of my kids.  I have noticed lately that the volume is low or muffled...you can't hear what is being said even if they are screaming 6 inches away.  I thought maybe something had gotten into the microphone, etc.  I recorded a voice memo and on playback i could hear what was recorded just fine at a normal level. Now once I tried to record a video of my kids talking, it played back so low that i can't hear anything and that is with the volume turned wide open.  Not really sure what this issue could be but if the volume works fine on voice memo wouldn't it work the same on video playback? 

    Hi there AmPriSi,
    It sounds like you may be experiencing a microphone issue with your iPhone. Use the following article to help you address this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Can't Hear Recording / Participants can't hear VOIP

    For whatever reason, we can record just fine, but there isn't
    any audio. We have confirmed that we can record audio using a
    different app. The audio is broadcast to other meeting hosts in a
    'live' situation. But regular participants cannot hear at the same
    time. I am assuming the two issues are connected.
    Anyone know why?

    Good point Kay,
    If the Camera/Voice pod is in the Presenter Only area, only
    presenters and hosts will hear the VOIP and see the video. Since
    the recording is done from the participant view, then the recording
    would not have any audio.
    Jorma@RealEyes

  • I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4.  However, I cannot record voice memos with my Bluetooth mic.

    I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine.  I can also use voice activated dialing, although it fails miserably interpreting numbers.  However, I cannot record voice memos with my Bluetooth mic.   I just get barely audible static.  Any suggestions?   Thanks.

    Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
    Thanks!

  • I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
    What is the brand/model/settings of the camera that recorded these videos?        ony  PMW 320
    When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
    the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
    the video in the Premiere Elements Editor, how many channels does the Audio Meter display?   
      I just drag and drop video and when playing back only channel 1 will appear
    What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
    I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
    Thanks for the help if possible,Kevin416 873 8374

  • What is wrong with my IPhone? If you take a video you can't hear the audio but if I do a voice memo you can

    I don't know what's wrong with my iPhone, I can listen to music but if I try to take a video you can't hear my voice, if I take a voice memo you can hear my voice.

    try exiting the app and double clicking the home button. the multitasking apps will show up. delete all of them by holding them down and pushing the red circle (dont worry that doesnt remove them from the phone, just completely closes the app and makes your device run faster) then power off your phone by holding down thw lock button and sliding the red arrow when it comes up. wait about 5 seconds after its completely off and turn it back on. then try using the mic. hope this helps

  • When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

    When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

    I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

  • I have a voice memo in my iphone but I can´t hear it or sync it.. Do yo know what do I have to do?, I have a voice memo in my iphone but I can´t hear it or sync it.. Do yo know what do I have to do?

    I have a voice memo in my iphone but I can´t hear it or sync it.. Do yo know what do I have to do?, I have a voice memo in my iphone but I can´t hear it or sync it.. Do yo know what do I have to do?

    Hi - we need more info in order to answer your question:
    1.  What type and model modem do you have?
    2.  Do you have a Windows 7 laptop with AU version 5.6.1?
    3.  How far have you gotten in the setup and is the Extreme still in factory mode?

  • I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

  • Can't hear audio from handheld mic recording

    I can hear interviews I recorded with a handheld mic on videos edited in iMovie and uploaded to YouTube only if I access YouTube via a brower such as Safari and Puffin and only if I use my new third generation iPad or an iMac or PC.
    If I try to access the videos via YouTube's app on my new iPad, I can hear the nat sound recorded with the video camera but I can't hear the interviews recorded with a handheld mic.
    I can't hear the interviews recorded with a handheld mic on my iPhone 4 through YouTube's app or via a browser.
    I wasn't having any problem three weeks ago.  This just started last week.
    What is causing this problem?  Is there a workaround or solution?

    You're connected to the line-in on the Mac? So set to Line-In or Built-In
    http://www.bulletsandbones.com/GB/FAQPages/RecordLineIn.html

  • Can't hear monitor / recording from mixer

    I'm running three mics and a direct feed from a pre-amp into a Yamaha mixer and then from the mixer to the MBP using Garage Band purely as a recording device.
    But I can't hear the mix that the Mac is recording.
    Never used GB08 before.
    Help! (Band goes on in an hour or two.)

    Thanks!
    (Part of the problem was that I was using a friend's BOSE headphones and he hadn't mentioned they have to powered on separately. Ok, that was dumb.)

  • I can only hear my record enabled track when recording,not when just playing

    This has to be a simple one - normally I can hear my record enabled track when playing back or recording but suddenly i can only hear it when I am actually recording.  I must have accidentally selected an option i am unaware of - can someone please help!
    Thanks

    In case anyone is also stuck I went to Options->Audio where there is an Auto Input Monitoring option.  I turned it off and it fixed my issue.

  • Can't hear myself record???

    I assume there is a simple solution to this problem.
    Levels are fine in the Inspector. . .and the track is armed. . .but I can't hear myself when I am recording. . .only on playback.
    Please help.
    Thanks.

    If you're running through Logic's audio engine with a 256 buffer setting you are experiencing latency although it may not be noticeable to you yet. Most experienced vocalists have problems with a 128 buffer and don't feel comfortable until using a 64 buffer setting. This is because they hear their voice in their head (absolute 0 latency) so any delay through the phones is easily perceived.
    The easiest way to hear latency would be to set your buffer to 512, if you're using a guitar to test you should be able to hear/feel the difference between the time a note is plucked and the time the sound appears, use higher notes 7th - 9th frets on the high b and e strings, make sure the guitar is resting against your chest so you can feel it's vibration.
    I learned this stuff over a long period of time, I had a MIDI studio synced to 4, later 8 track reel-to-reel tape machines in the mid 1980's, using Yamaha hardware MIDI sequencers and later computers, think I moved to computer sequencing in 1988. At one point I had PC, Mac, Atari and Amiga computers setup to be compatible with an international distribution company I was doing tracks for. Final product had to be available on all four platforms. Later worked for PBS doing tracks for the science related productions. (thank you Roland analog synths)  I've also worked as a performing and studio musician for 40+ years.  So yes, I'm a MIDI geezer!

  • I want recording LP's with Audacity 2.0.5 since I use Maverick I can't hear the sound before recording. What can I do?

    I want recording LP's with Audacity 2.0.5. Since I use Maverick 10.9.3 I can't hear the sound before recording. Does somebody know how to get
    the presound before to click on record?

    You have to do some work on your own.
    Start here:
    http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5

  • Recording Audio...Can't hear over other tracks when recording!!

    Hello again and thanks for the help. So why, when I'm recording audio, a guitar for example, is the signal so low I can barely hear it above the other tracks. Then, all of a sudden, when I play back what I recorded it almost knocks me back off my seat it's so loud. How do I turn up a track i'm recording enabled track so that I can hear better what's being recorded? This is a problem I've run into myself and when I'm recording others, like a vocalist. I need some way to turn up a "cue" send level even if it's coming out the same monitors that the rest of the mix/track/song is.
    Any tips would be much appreciated. THANKS AGAIN

    I understand that this is directly related to my monitoring capability but am assuming there's some way, INSIDE of Logic, that this level adjustment can be made. Why, when recording, can you barely hear a signal and then when a track is automatically set to 0.0 dB it is much much louder. Why the difference.
    I, too, have a MOTU 828mkII. Admittedly not as good with it as I should be, I need to work more with my monitor mix but this situation seems to often be used to dodge my real question ^ up above. Any tips or tricks are much appreciated so that's cool, but see if you can at least shed some light on what I'm confused about up there^^^^^^
    I DO NOT want to use headphones to record this guitar. Feels more natural for me to record directly into Input 1 of the 828 and hear all the tracks coming out of my monitor while I'm recording the guitar over it. Again, why so quiet when recording and why, then, so loud when no level adjustments have been made when playing back the audio. Again, no level adjustments made on anything and all of a sudden the most recently recording track is louder relative to all others
    thanks

Maybe you are looking for

  • Creating a Folder and uploading file into that folder Inside OneDrive in Office365 programmatically

    I am using this below code to create a folder inside onedrive in office365,but i cant able to access the url for accessing my personal onedrive,it causing error "Cannot connnect to the server"  using (ClientContext clientContext = new ClientContext("

  • Drive does not appear in ISCSi volumes

    Hi, I have configured a windows server 2012 r2 OS with 2 disks/ The server is a VM. Both disks are SCSI. Hoerver, the data disk does not show in ISCSI setup Screenshot of the part in question is here: https://weikingteh.files.wordpress.com/2012/12/im

  • Tables in Dreamweaver Vs Text and Image boxes in Golive?!!?

    I have built a website in GoLive and to edit a page you insert text boxes, images boxes, etc and then can move each one freely and easily by simply dragging it. It seems when I transferred the site to Dreamweaver it is now in a table with very little

  • Printing Original DocTotal on Check Stubs - Calling all PLD pros!

    We have at least 2 clients that want to print the Original Document Total on their check stubs.  For example, they want it to print: Original Invoice Amt, Open Total, Discount, Payment.  That way, when you have a $1000 invoice but previously paid $40

  • Possibility to attach documents in TEM?

    Hi all, I've accidentally posted this as a blog post already, but I guess it more belongs into the discussion section: We have an old Training and Event Management solution in use and I received the question whether it is possible to link a scanned f