Can't hear second track of Beatles

I have put the Beatles song in final cut pro call in my life when it gets to the part where the keyboard comes in I can't hear it now when I play the song in Itunes as a mp3 I hear the whole song but when
I stick it into final cut as a aiff I seem to lose a track any suggestions?

Thanks for all your help we figured it out, I know you need permission this is just for his own personal use, and half of the song is owned by Sony so you would need Michael Jackson and Sonys permission which takes about 2 to 4 weeks to get for any song which we do through ASCAP and BMI for most of our music.
Thanks again guys!

Similar Messages

TS1008 when the usb mic (Blue) is connected I can't hear the track play

when the usb mic (Blue) is connected I can't hear the track play. Track plays fine when mic not installed...hoping this is a typical set-up issue easily resolved.

Did you choose the the output in Garageband > Preferences > Audio midi?

What do i do if i can't hear a track in garageband?

What to do if I can't hear a track?

Which version of GarageBand do you have?
And what have you tried already to fix it?
Is it only one particular track you cannot hear, or is GarageBand silent?
A real instrument track or a a software instrument track?
Have you checked, if any tracks are muted or soloed?

Can't hear double-tracked keyboard in playback

I recorded a piano track as a software instrument, and had no problems with hearing it in playback. Then, I duplicated the track and played the same thing. Now, when I try to play through the song, I can only hear one or the other, or neither. When I select one of the tracks and restart from the beginning I can hear it, but as soon as I deselect it, I can't hear it. I have gotten both to play, but only very briefly before one track cuts out. Is this a software bug, or am I missing some setting?

Thanks! I was racking my brain with this! where in
the menu is this feature? Or in the manual?
No problem. The menu is:
View > Audio Scrubbing
But as I say to any editor learning FCP, if you go to a menu item more than 3 times in 10 minutes... memorize the keystroke command. You'll get much quicker.
For a list of keyboard commands:
Help > Quick Reference
(although I almost never find anything quickly in that quide)
Good luck!
- pi

When burned to a disk i can only hear most tracks through the left speaker!

alright, i recently recorded a few songs they consist of a looped drumbeat some software and real instruments. I made sure all were panned to the center, but when i listen to it on a cd or on itunes i can only hear a majority of the parts through the left speaker. the part that comes through the right speaker is the looped drum beat. So if anyone has any suggestions or something i just missed please let me know. thanks.

http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly ?

No sound in headphones. Can't hear other tracks when recording. Need help

I just got Logic. I have a M-Audio Blackbox for my guitar, and a Midi-Uno for my keyboard.
I have play and record and hear my guitar. But when recording, it doesn't play the other tracks, so I can't play along with them.
Also, there is a problem in hearing the sound out of the output, whether it be headphones or the built-in speakers. No sound comes out, even though in the system pref. I hear the beeping to test the output.
This is very annoying because these seem like elementary things that should work but they aren't.

I'm just using built-in audio. I make sure the output in the system prefs is headphones, but then in the software I hear nothing when I play the audio. Maybe I have to check the master audio level.
Thanks for the word about it not being anything too crazy. It can be frustrating when the software doesn't seem to do something basic. I'll look at the master levels during playback.

Can't hear live track when playing midi drum track

This is a really dumb question. I've been away from Logic too long. I'm trying to monitor a live guitar track while I play a recorded midi drum beat. I can hear the midi track fine. And I can hear the live guitar track when the midi track is not playing. But as soon as I start playback, the live track goes silent even though the red record enable button is on and the levels show live guitar signal. It just doesn't make it to the output. If I actually record a region, I can hear it. But I don't want to record, I just want to practice with effects and a drum track.
I've done this before. What have I forgotten?

Hi,
hold down the "CTRL + click" ot rigth button of the mouse in the REC icon on the transport...
Auto Input monitoring (must be off)
G

I just bought this iPhone 4S second hand and during incoming and outgoing calls I can't hear the other person talk unless it's on speaker or if I have headphones in. I don't know what to do I've turned up my volume and checked my settings!! Need help

I Just bought a second hand iPhone 4S I am having issues with the hearing during incoming and outgoing calls, I have turned the volume up and checked my settings but I still have trouble hearing the other person speak. It works if it's on speaker or if I have headphones plugged in. I need help desperately!!!!! Any suggestions on what to do???

Hey Itsanaasaunders,
Thanks for the question. I understand that you are experiencing issues hearing sound while on a call (receiver wise, not speakerphone). The following resource provides troubleshooting steps for this symptom:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
http://support.apple.com/en-us/HT203800
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
- Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
- Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
- While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
1. Restart your iPhone and test again.
2. If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Thanks,
Matt M.

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

Can't hear audio on tracks three and four

Hi,
I'm new to FCP 5. When I go the the audio mix window I can see the audio for tracks 3 and 4, i just can't listen to it. I checked my general settings under real time audio mixing and it says 8 tracks. I don't have any other applications up. Any ideas?
I should also mention that when I turn off tracks 1 and 2 I still can't hear the other tracks
Dual 2GB G5 Mac OS X (10.4.2)

First, check the simple things .. like are those 2 tracks muted? Are both tracks enabled?
Do FCP's meters indicate that there IS audio there? What happens if you load either of those tracks into the Viewer - can you hear them? What happens if you move the clips on those tracks up to track 1 & 2?
-DH

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Can only hear 1 audio track?

I,m new to Elements 10 and have just started editing. I just dragged a clip onto my timeline but can only hear one audio channel. I know there are two tracks, how can I mix both through?
thanks. Darrell

Hi Steve, thanks for your help. but this has really got me beat. When I play the track straight off my computer I hear all audio tracks. But then I “get media” bring the clip in and listen off the elements timeline – I only hear track one???
So my computer must be fine?
When you say “Can I see both right and left channel in the wave form? Its hard to tell – am I meant to be looking at the “green strip “ on the timeline? Its so very small. - I see a yellow line and a grey line underneath? what am I looking at. Its very frustrating because I am trying to edit a friends concert and the music is on track one – but the atmos and applause is on the other 3 tracks – but all I can hear is the music
any suggestions?
cheers mate
Darrell Brown
0418-954-858
[email protected]

I can only hear my record enabled track when recording,not when just playing

This has to be a simple one - normally I can hear my record enabled track when playing back or recording but suddenly i can only hear it when I am actually recording. I must have accidentally selected an option i am unaware of - can someone please help!
Thanks

In case anyone is also stuck I went to Options->Audio where there is an Auto Input Monitoring option. I turned it off and it fixed my issue.

Why Can't I Hear Both Tracks at The Same Time Without Selecting Them?

Hi,
Another newbie question:
I have a midi track and an audio track. The midi track is a loop and the audio track is footsteps.
The only way I can hear both is to select both by shift clicking to select them.
This is the first time this has happened because I've had no problem hearing multiple tracks before, playing together.
Could someone tell me what I'm doing wrong?
Thanks!
L.

Sounds like you've Soloed a Track somewhere. Check to see if any Tracks have 'Solo' activated (the little "S" button); it should be off.

Recording Audio...Can't hear over other tracks when recording!!

Hello again and thanks for the help. So why, when I'm recording audio, a guitar for example, is the signal so low I can barely hear it above the other tracks. Then, all of a sudden, when I play back what I recorded it almost knocks me back off my seat it's so loud. How do I turn up a track i'm recording enabled track so that I can hear better what's being recorded? This is a problem I've run into myself and when I'm recording others, like a vocalist. I need some way to turn up a "cue" send level even if it's coming out the same monitors that the rest of the mix/track/song is.
Any tips would be much appreciated. THANKS AGAIN

I understand that this is directly related to my monitoring capability but am assuming there's some way, INSIDE of Logic, that this level adjustment can be made. Why, when recording, can you barely hear a signal and then when a track is automatically set to 0.0 dB it is much much louder. Why the difference.
I, too, have a MOTU 828mkII. Admittedly not as good with it as I should be, I need to work more with my monitor mix but this situation seems to often be used to dodge my real question ^ up above. Any tips or tricks are much appreciated so that's cool, but see if you can at least shed some light on what I'm confused about up there^^^^^^
I DO NOT want to use headphones to record this guitar. Feels more natural for me to record directly into Input 1 of the 828 and hear all the tracks coming out of my monitor while I'm recording the guitar over it. Again, why so quiet when recording and why, then, so loud when no level adjustments have been made when playing back the audio. Again, no level adjustments made on anything and all of a sudden the most recently recording track is louder relative to all others
thanks

Can't hear second track of Beatles

Similar Messages

Maybe you are looking for