Can't hear sound with headphones

In Logic Express 7, I can see the levels indicating that the software is recieving a MIDI signal when I play keys on my keyboard, but I can't hear anything in my headphones. What's the solution?

It may be in the interface software. I use a FireBox and have to make sure the software for it is configured correctly. Also, check your System Prefs to make sure your output is being directed properly.

Similar Messages

  • HT1386 Syncing works but can't hear audio with headphones.

    Syncing works but can't hear audio with headphones.  Works without headphones though.

    Have you tried other headphones?
    What does syncing have to do with the problem?
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price

  • Can only hear sound through headphones

    i can only hear sounds on my ipod touch through my headphones

    first try plugging and unplugging your headphones at least a dozen times really fast because somtimes the headphone jack sometimes has debris in it. i used to have the same problem.
    if that doesnt work restore it back to factory defaults by going to the setting icon then go to the general bar, after that scroll al the way to the bottom and click reset, then click reset all settings after that if it still wont work do the same thing accept click on erase all content and settings 

  • Can't hear sound with M-Audio MobilePre USB driver in Logic 7.2

    Hi. I've installed an M-Audio MobilePre USB interface to hook up a nova mic and i've also hooked up an oxygen eight midi keyboard. Can't get any sound from Logic when i select M-Audio MobilePre USB as my driver, and can't get Logic to recognize my midi keyboard. I have downloaded the latest M-Audio MobilePre USB update off the web, and still nothing. I'm new at all of this. Can someone help me? Thanks in advance.

    I'm wondering did you install the drivers and after that plugin the usb devices or did you leave them plugged in during install?
    What happens when you unplug the midi interface and put it back in? Is it recognized by Logic by putting up a dialog that something has changed?

  • Can't get sound with headphones on iPad mini

    When I plug headphones into mini sound wont come out but still comes out if bottom of mini.

    Hi!
    I have exactly the same problem, and when I look for netflix on the App Store it doesn't show in the results. Did you find a solution?
    Thanks!

  • Sound with headphones & notifications only

    Can only get sound with headphones and notifications. Speaker not working.  HELP! Going nuts.

    You really should stick one discussion or the other one. You have created two discussions now and it may get confusing.
    You can try plugging and unplugging the headphones a few times. There may be something loose in the headphone connection. However, this issue has been reported before, so it has happened to others.
    You can also try restoring from a backup - if you have a recent backup. If you restore from a backup - everything in that backup will be restored to the iPad. So if your last backup is one month old - you will restore the iPad to the condition it was in one month again and you will lose any app data and device settings that you had on the device since then.
    You said you "reset" the iPad. To me that means you rebooted the iPad with the home and power buttons. If you mean that you restored the iOS software that's something else. If you haven't restored the iOS software, that might be your next option.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • For 1/11/11 expert day: can hear sounds on headphones but no sound via the internal speakers

    HP Pavilion dv6135nr Notebook internal speakers have stopped working.  I can hear sounds on headphones but no sound via the internal speakers.  A search on HP customer care for my notebook yielded the download recommendation below, even though I had not stated my problem.  However, executing this download did NOT resolve the problem.  Please advise regarding resolution to inoperable speakers.  I do not know if all of my sound and audio settings are correct, but the mute is not on and the volume controls are properly set.  The default device is Conexant High Definition Audio output, per the sound and audio devices properties hardware  tab the device status states "this device is working properly."  Is it possible that a Skype or Foxfire update is in conflict with this device?  If so, how do I resolve this situation?
    Thank you.
    Description: This package contains the driver for the Conexant High Definition Audio Chip.
    PURPOSE: Routine Details and specifications File name:
    sp34204.exe [1/1, 1.38M]
    System requirements: HP SoftPaq Number SP32646, "Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio," (or later) must be installed on the notebook before installing this SoftPaq. Look for HP SoftPaq Number SP32646 (or later) in the Software and Driver Downloads section of the www.hp.com website. Released: 2006-12-01 Version: 3.26.0.0 A Compatibility: Microsoft Windows XP Professional, Microsoft Windows XP Home Edition, Microsoft Windows XP Media Center, Microsoft Windows XP Fix/Enhancement: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.

     Re: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.
    HOW DO YOU FIX THIS?? I cannot find the correct Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio that works with my computer...
    My computer:
    VISTA
    HP Compaq 2230s Notebook PC
    Everytime I use my headphones for more than an hour or two, the **bleep** audio will not play on my notebook's speakers, just through the headphones. Usually restarting a few times resolves the problem, but not this time. If I knew that HP computers sucked this much I would never have spent so much money on this one!!!
    Can you please tell me how to fix this problem once and for all? Thanks!!

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • I can't hear sounds from my ipad speaker

    I just bought Ipad mini last 2 weeks....since I have bought ...I can not hear sounds from speaker.
    It always shows "headphone" mode....Why?
    Technician tried to restore but not work....What is your suggestion?
    Thank you.

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Can only hear sound out of one ear in iPod 30gb

    My nephew can only hear sound from one ear of his headphones.
    1) he's not becoming deaf and we've tried multiple pairs of headphones that give the SAME result.
    2) the volume settings are correct, so its not that.
    What are the options here? Is there a known fix? If its a hardware issue, can Apple do anything (free under warranty or repair with charge)?
    Thank you for your help!
    - John M.

    maybe that the file only offers one audio track. have tried other players to play it?

  • Can't hear sounds in videos and games

    Can't hear sounds in videos and games? Hello. I have some problem with my SB Li've!. I'm using a Sound Blaster Li've! 5. Digital (it writes Model: SB0220 on it) sound card, attached on a Gigabyte Intel 945 S-Series motherboard. And I've installed the driver and software from the cd that i got out of the SB Li've!'s original box (Creative SB Li've! series, Release 5.2.3.296), and also installed my motherboard's onboard sound card driver (Realtek High Definition Audio Driver, Release: 5.0.0.5567). I'm running Microsoft Windows XP Professional SP3, using 4. Creative speakers.
    I'm okay when listening mp3's or Windows system sounds, but when it comes to play a game or watch a video;
    I cannot properly (or sometimes completely) hear sounds, if my EAX Equalizer is set up to something else from "No Effects",
    I can hear every sound properly if my EQ is set up "No Effects".
    Can anybody tell why this happens? I can give more information about my hardware and software if needed. Thanks so much for your time =)

    Nothing, this link in message box is inactive:
    But I freely can buy Apps, Books, Music and other from App Store...

  • I can not hear sound from my computer. computer model ( compaq evo d 510 small)

    I am hearing a song suddnel my computer sound stoped then i restart my  computer but i can not hear sound. when next day i start my computer sound was playing but when i restart my computer i can not hear sound . iam facing till now this problam

    Hi,
    Download and install the IDT driver on the link below.
    http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46567.exe
    When the installation has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Help I Can only hear sound from my juke b

    can anyone help me i think i screwed up my computers sound and i dont know how. I can only hear sound from musicmatch jukebox when i play a song. i cannot hear sounds from any of my games or othe applications. please help me!

    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth. 
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.

  • HT1459 my  4th generation ipod only has sound with headphones

    my 4th generation ipod only has sound with headphones how can i fix this problem

    - Try inserting/removing the headphone plug at least a dozen time.
    - Cleanout/blowout the headphone jack
    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem that indicates a hardware problem. Likely the headphone jack is bad.

  • Is it possible to see a film on appletv trough iPod  and ear sound with ear sounds with headphone of iPod?

    Is it possible to see a film on appletv trough iPod  and ear sound with headphone of iPod?

    No

Maybe you are looking for

  • J1incert - TDS certificates

    Hi experts All line items of TDS return (Q1,Q2,Q3 & Q4 is not picking in TDS certificate. For some of the vendors it is picking and somtimes not. I have checked there is no error in the documents. Please help. Regards Kuldeep Dubey

  • Corrupted Illustrator files

    Recently our IT department copied files from one drive to another on our server. A lot of our files are now corrupted. We are using Windows XP and Adobe CS3. The error I am getting is "Acrobat PRF File Format is having difficulties. Expected a dict o

  • JPDK June - Portlet customization sample question

    Hi, I was wondering whether someone could help me out with the customization sample provided in the JPDK distribution of June. Since BaseCustomization usage is deprecated I'm trying to use subclass the 'NameValuePersonalizationObject' class. However

  • Create dev database from standby database

    Hi folks, I need to create a dev database by using RMAN's method of cloning. But, since it is business hours and the production database is being used at a very high rate, I cannot carryout the cloning by connecting the primary database as it may cau

  • App Store sub menus empty

    I have an IPAD 3 with IOS6. When I go to the App Store application, more and select a sub group most are empty. If I select music or entertainment it just show my apple id and redeem. Anyone else see this?