Can't hear the Audio on a video sent via text.

Sometimes my phone won't play the audio part of a video that was sent to me via text.  Yet the same text was sent to my husbands iphone and the audio is fine.  The video plays on my phone but you can't hear anything.  And yes the volume is turned up:)  Any thoughts?

    Greetings dgrabago!
I'm actually being overwhelmed by thoughts on this one right now. After all, this is a very odd situation and we intend on fixing it ASAP.
Now, the most important question I can ask is if this only happens with videos texts that audio cuts out? Or is this happening at all during calls, while playing YouTube clips, etc.? If it's just text messages, do you use a third party messaging application or the stock application? If it's a third party app, please uninstall it. But, let's assume we're on the stock app. For starters, please start by removing the SIM for at least 60 seconds so as to refresh your phone with our network. Then go ahead and delete your old text message threads so as to give you a fresh start. Finally, please shoot a video text to yourself, test, and update us on your findings so we can proceed if necessary.
EvanO_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • I can't hear the audio in streaming videos. Un- and reinstalling Flash did not help. What now?

    I no longer hear the audio when I try to watch videos in Firefox, though MP3s play just fine. Everything is OK when I switch to Internet Explorer, so the problem appears to be with the browser and not with the Flash plug-in or the websites in question. Just to be sure, I uninstalled and reinstalled Flash, but there was no improvement.

    Try using a photo import utility or application for this instead of doing it the archaic manual way. Even Windoze includes a scanner and camera wizard that can be used for this.

  • My iMovie is skipping like crazy when I try to edit and then goes to a black screen and you can only hear the audio!?!? What's happening??

    I use iMovie almost everyday for Youtube videos. I have nothing in my imovie except the 5 clips that I'm editing now. I have all my media on an external hard drive and delete everything after I'm done with ( I empty all trash cans). My iMovie is now skipping when I try to edit and then the clips just go to a black screen and I can only hear the audio, this has been going on for a week and I don't know what to do?!? Any help?

    Try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Resetting the System Management Controller
    --  Those links are currently down for maintenance but should available shortly.

  • Hearing the audio when Capturing video

    You folks are the best. My new question deals with capturing video. I can only hear the audio if i go th the clip settings and check the audio box. I know there is a way to have that automaticly happen every time I capture. I am baffled. I have tried to find a way in all the set up things and can't. What have I done or what am I doing wrong? It did it in my other Mac, until I updated.
    Do I have to check that box every time?
    Thanks, Jon Kessler
    PS: i tried to find out about it in the manual but had no luck.

    Had question answered by my Apple care guy

  • I am editing a clip but it won't show in the screen, I can only hear the audio. any suggestion?

    I am editing a clip but it won't show in the screen, I can only hear the audio. any suggestion? The clip is visible in the timeline but when I play it I can only hear the audio and no images.

    Hey, I'm having the exact same problem.
    I just got my Macbook Pro and I tried to partition/install windows xp the first day I got it. After successfully partitioning my HD, the 50GB partition didn't show up while trying to install the windows platform.
    To be a bit more specific, it doesn't even show up in my startup disk in the system preferences menu (if that's any help?)
    So after about a week of abandoning my Macbook and going back to my PC I went to the Apple store and someone from the genius bar just told me to reformat the entire thing...so that's what I did and I'm still having the same problem.
    Any advice Lyssa?

  • I can not hear the audio tracks in iMovie

    I can not hear the audio tracks in iMovie 10.0.1.
    Can anyone help me?

    Have a look in Utilities > Audio Midi Setup

  • Can you keep the audio of one video clip but add another clip?

    Can you keep the audio of one video clip but add another clip?
    I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

    There are several way to do this;
    Replace with clip...
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

  • I just bought a movie and I can only hear the audio

    Hi I have just bought the movie, Elf, I can hear the audio fine but I am failing to see any of the actual video. Does anyone know how to solve this?

    Hi NRisk,
    Thanks for visiting Apple Support Communities.
    If you can't see video when watching movies from iTunes for Windows, the steps in one of these articles can help:
    iTunes for Windows XP: Troubleshooting video playback
    http://support.apple.com/kb/TS1386
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    If troubleshooting doesn't solve it, you may also want to report the issue with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Best Regards,
    Jeremy

  • I cannot hear the audio attached to video files.

    When I load in a video file saved as a .avi format that has audio and video included I cannot hear the audio. All that is coming out is what sounds like a swamp wildlife soundtrack on every video (Which is really odd).
    How do I correct this problem for Adobe Premier Elements 13?
    Thanks

    carl77finch
    Please determine whether or not your recording device is recording with a variable frame rate.
    To do that, take the file into a video audio properties readout program such as MediaInfo (Tree View). If you see 3 frames rates given
    for the video, then your video was recorded with a variable frame rate. Premiere Elements often does not usually fare well in that type of
    situation. If frame rate found as variable type, next step would be taking the video into HandBrake and converting it to a H.264.mp4 files with a constant frame rate of 29.97 frames per second rather than a variable frame rate.
    https://handbrake.fr/
    More on all this once we get some further details of your results.
    Thank you.
    ATR
    Add On...MediaInfo is a free program and extremely useful, however its download and install can be flawed with unwanted carry along
    software. Proceed with caution. If you can get your variable vs constant frame rate information from another source (like the manufacturer of your recording device) best do that. The following is listed as a safe download
    http://mediainfo.en.softonic.com/
    but I have not tested it. I am working with an older version of MediaInfo where this type of nuisance did not exist.

  • Can you record the audio from a Video embedded in a pdf?

    I can't seem to find anything on this, so I will ask. A client sent us a company produced interactive pdf and wants us to use the audio from a video clip that is in the pdf. We asked for the audio clip but they don't know who to get it from and just keep saying it is in the pdf. While others try to explain that a pdf and an mp3 are not the same thing. I get to look into a fall back position of trying to extract the audio (or video). There is no copyright issue here. Client peon just can't/won't get the proper file.
    Maybe some one can help or point me to info that says it is not possible.
    Thanks.

    WireTap Studio did the trick. I downloaded a free Trial version and bob's yer uncle.
    Thanks Michael

  • Can I rip the audio from a video so that's all i have?

    I have a couple of comedy videos and i find it unecessary to have the video and the audio, since it would be just as great with only the audio. So my question is if anyone knows if i can rip only the audio froma quicktime movie? thanks in advance.

    Try virtualdub found at virtualdub.org. I have never tried a quicktime movie. If it doesn't work, go to www.digital-digest.com. They will have the answer.

  • What is wrong with my IPhone? If you take a video you can't hear the audio but if I do a voice memo you can

    I don't know what's wrong with my iPhone, I can listen to music but if I try to take a video you can't hear my voice, if I take a voice memo you can hear my voice.

    try exiting the app and double clicking the home button. the multitasking apps will show up. delete all of them by holding them down and pushing the red circle (dont worry that doesnt remove them from the phone, just completely closes the app and makes your device run faster) then power off your phone by holding down thw lock button and sliding the red arrow when it comes up. wait about 5 seconds after its completely off and turn it back on. then try using the mic. hope this helps

  • I have recently updated my Apple TV (gen 2) and now Airplay video won't work.  I can hear the audio, but no video.  I have unplugged, replugged, restarted.  Help! This problem is all post-upgrade.

    First time using this site; not sure if I'm doing it right.
    My apple tv which has always worked beautifully is not picking up airplay from my ipad.  It is picking up the audio, and it will certainly  do that "mirroring" thing where you watch a grainy computer screen on your tv, but it won't work the way it used to.   Any help?  I have plugged and unplugged, reset and restarted everthing to no avail.  Icons are available, I see the apple tv option on all devices but it just won't do it's thing.  Help!
    Thanks, everyone, in advance.
    Sitz.

    Hi, sitzmark128.
    Sometimes a simple power cycle of your your wireless network can resolve some AirPlay issues.  I would also recommend closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.
    If the issue persists after processing these steps, see the article below. 
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Cheers,
    Jason H. 

  • Can't hear the voices in a video

    I edited a video in adobe premiere elements 9 and I used noise reduction and the transition "constant gain" on the audio. I then uploaded the video to youtube. On my Dell computer and on my ipad, I can hear peoples' voices in the video fine with or wihout headphones. However, I cannot hear the people speaking in the video on my iphone when the headphones are not plugged in (I can hear the sound on my iphone when the headphones are plugged in). Other videos work fine on my iphone, so I'm wondering if something went wrong when I was editing in premiere. Does anyone have any suggestions?

    When I go to the window menu and select audio mixer, I get 0.0 at first. When I hit play, the greenish bar goes up and down as the people in the video speak, so the levels change constantly (sometimes -6, sometimes higher, sometimes less).  I generally set the volume level at 0.0, but I raised the volume a bit and lowered it a bit at certain spots. The odd thing is that I can hear the voices on most devices, just not on an iphone with the headphones not plugged in. However, other videos work fine on the iphone without the headphone so that's why I don't think it's the device. Other video I've edited work fine on the iphone too, but maybe I made an odd editing mistake this time. I did use an external mic for the video, but I don't know if that should make any difference since I can hear the voices fine on the computer....

  • Can I  rip the audio from a video file?

    I have a video file with a band singing on it. I have an ipod nano, so I can't import the video with the singing onto my ipod. Is there anyway to rip the audio from the video file and put that onto my ipod?
    -Thanks

    Open the video in Quicktime Player.
    Select the Export menu item.
    Change the Export type to "Sound to Wave".
    Save the WAV file somewhere with the default settings.
    Load the WAV file into iTunes and use iTunes to convert it to AAC for the Nano.

Maybe you are looking for

  • I suddenly lost my complete mail and contacts

    I have been using mail for weeks on my ipad2 and now suddenly when I open Mail I have à blank screen.  I still have internet connection and also on my other laptop. I only receive mails on my laptop and not anymore on my ipad2. Manu thanks for any he

  • Custom fields for ROS initial page in BSP application

    Hi, We want to add some more customer fields in ROS initial page, for example TIN number. We have added a field to ZZTIN in the include CI_CUF_REQ_FIELDS of structure ROS_CUF_REQ_FIELDS and also implemented BAdI ROS_REQ_CUF. After adding custom codes

  • Condition tables for PO

    Hello Gurus, I am creating a report for Input tax and Output tax calculation and I have been searching for condition tables for PO. I have tried KONV, KONP but i dont get any entry for taxes like VAT, Additional VAT, CST, etc. in that table related t

  • Data Mover login error (SQL 2008R2 as backend DB)

    Hi, This question was asked in this thread -> Continued Discussion - Steps to Upgrade PT8.49 to 8.50 Manually The difference between problem in that thread and mine is that I have WIN08R2 SQL08R2 Peopletools9.52 and Peoplesoft HRMS 9.0 installed. I w

  • Secure download src? SSL and ADE

    Is it possible to package and epub with the src being an https? I know this is no problem during the packaging, but Digital Editions isn't able to download files over SSL. If you attempt this ADE thinks that the file src in the fulfillment token does