Can't I stop the HOG Flash from Firefox? I use FlashBlock but a constant fight. Often both cores maxed at 100%,laptop very slow until I kill Flash in Tsk Mangr

Flash is the problem. It often maxes both cores of my dual core processor and brings processing virtually to a halt.
Originally, I killed flash in Task Manager whenever i heard my fan come on and also noticed slow system response. This was very distracting and took a lot of time.
Then I installed FlashBlock, but it doesn't stop Flash unless you tell it for each and every website.
When reading news, and opening a link, I will hear the fan start, so i click the block button/icon in Firefox to block the site from using flash. Some sites don't launch with the FlashBlock icon. I have to use the manual kill option for them. This extremely frustrating. I understand why Steve Jobs hated Flash.
I don't like Apple's money-sucking wallet-leach behavior, so I use WinTel and live with the frustrations of which this is the biggest. HTML5 supposedly is the solution, but site builders use flash.
FireFox needs a flash control switch built in the browser to give control of Flash - block/ask, etc. functionality.

By the way, Firefox does have a Click-to-Play feature you can use for Flash. That will delay Flash from starting on a page until you approve it. However, the approval is per site, I believe, so you may need an add-on to control it per page.
To set "Ask to Activate", open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins. Look for "Shockwave Flash" and change "Always Activate" to "Ask to Activate".
When you visit a site that wants to use the Flash, you should see a notification icon in the address bar and one of the following: a link in a black rectangle in the page or an infobar sliding down between the toolbar area and the page.
Not a solution, but hopefully will help a bit.

Similar Messages

  • I can't connect to the itunes store from my iMac...But can from all other devices?? Any ideas?

    When trying to connect to the itunes store from my imac it says unable to connect to the itunes store at this time...please try again later.  Has been for 2 days now.  I'm able to connect from all other devices, just not our imac.  Any suggestions??

    Hi there Kevdog,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    -Griff W.

  • How can I stop the voice over from my apple tv

    I have just connected my Apple TV which appears to be working ok. How do I stop the interactive voice from speaking.

    I have the 2nd Gen Apple TV and it is where I said. Have you updated yours to the latest firmware/software? I can't see why you are unable to find it otherwise. I will take pictures if you want me to.

  • Is there any way to stop the print screen from dropping down on top of the page to be printed.  Can the print screen be moved?

    Is there a way to stop the print screen from dropping down on top of the page to be printed.  Can the print screen be moved?  When the print screen drops down, it covers the page and the info needed to create the file.  Thank you

    You will find that this is application dependent.  Most Apple applications such as Safari and Mail will use the "sheet" type of dialog boxes that you are referring.  There is no way for the user to change that behavior.  Other, non-Apple, applications like Firefox use a "modal" dialog box for printing etc.  The modal boxes can be moved around so you can see the page behind.

  • How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

    How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

    [discussion moved to Creating, Editing & Exporting PDFs forum]

  • How can I stop the E:/ folder from popping up?

    I would like to know how I can stop the E:/ folder from popping up everytime I perform an action e.g. transfering songs, and deleting songs from library.

    This is likely due to an extension. For example, the Web Developer extension has a setting to open the error console, and some mouse gesture extensions have been known to open the error console.
    To track down what extension is causing this for you, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How can i stop the download box from viewing evertime i download something?

    how can i stop the download box from viewing everytime i download something?

    Open Firefox, choose Tools on the menu bar, then Options, General, and there's a tickbox option to deactivate the Downlaods window.

  • How can I stop the Drudgereport page from autorefreshing? None of the standard answers work.

    How can I stop the Drudgereport page from autorefreshing? None of the standard answers work.
    ''locking - https://support.mozilla.com/en-US/questions/775159 ''

    Drudgereport includes JavaScript code that refreshes the page. You could disable JavaScript for the drudgereport site, that will stop it from refreshing. You can do that by installing the [https://addons.mozilla.org/firefox/addon/4922/ YesScript] extension which allows you to block JavaScript on sites that you specify.

  • How to stop the tab bar from automatically hiding itself?

    ive only found how to stop the address bar from disappearing and everyone with the tab problem seems to have posted this over a week ago and still hasnt been fixed yet if noone has a fix im out and done with firefox they can suck a fat one
    why add this feature! i can understand the address bar but not the tabs all you have to do to hide it was push the tab button again and its gone was that so fucking hard that you had ruin a perfectly fine browser

    Hello,
    In Firefox 23, as part of an effort to simplify the Firefox options set and facilitate future improvements to Firefox, the option to hide the tab bar was removed.
    Fortunately, this can easily be resolved if you desire the keep tabs hidden. You can install "[https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/ Hide tab bar with one tab]", an extension hosted on Mozilla's add-ons site, which will restore the ability to hide the tab bar.
    Thank you and I hope this helps!

  • I have a macbook pro.How do I stop the color wheel from spinning?

    I have a macbook pro.How do I stop the color wheel from spinning? I can not get the computer to shut down w/out doing a force quit.

    I suggest you download and install EtreCheck from http://etresoft.com/etrecheck
    Run EtreCheck and publish report here
    Allan

  • Start and stop the Communication channel from Java Mapping

    How to start and stop the Communication channel from Java Mapping in XI 3.0
    Scenario  PI - > MQ -> Third Party web application 
    Web application is down and then Communication channels are stop manually .  
    We need to automate this process,
    MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
    Trigger will send u201CSTOP u201C message to PI
    How to configure PI scenario to stop different com channels when this message received ?

    check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
    make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
    However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

  • Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the pro

    Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the program and did a few profile building sessions, now it pops up each time I start the program, blocking me from using it. Help sure would be appreciated.
    Jay

    I looked at your post this morning and did not know enough to respond, other than to find out that links to iListen now go to newer, renamed software. Considering it's been nine hours with no response, I'm suspecting few people here have experience with that software. You could contact the current copmany that used to sell that package and see if they have any archived support info.
    BTW: please check you entry for "Mac OS" in your profile. It says iOS, which cannot run on an iMac. iOS is the system for phone and iPads but can't run on Mac computers. Do "About this Mac" from the Apple menu and see what it says about the OS version. Should look like this:
    If the "Processor" line says "Intel," you have a newer Mac than the old modles this forum covers; Intel iMac have their very own forum here:
    iMac (Intel)

  • How to stop the output panel from displaying

    Hi,
    in CS5 (ancd CS3-4) how do I stop the "Output" panel from showing up automatically each time I test the movie using the Command+Enter keys? I know I have an error but it's a network error which does not effect my clip. it's annoying!
    Thanks
    Mic

    You can use F2 to close the output window. I dont think it can be stopped from displ
    aying.

  • Stopping the service order from further processing

    Hi Experts,
    According to my requirement, the service orders will be generated by the call centre agents , then they will release and the technicians will be determined . The pager messages will go to the technicians.
    But the service order whic are generated after 5 PM , we should not send the messages to the technicians althought the service orders are released.
    For this where should I do the coding , which is the exact place to stop the service order from further processing.
    Please help me out in this.
    Thanks in Advance,
    Praveen

    Hi,
    The best way would be to implement a ORDER_SAVE Badi..wherein u can stop a service order for further processing based on the status..
    Regards,
    PePe

  • Howto stop the application module from using a DB

    Hello,
    Maybe and unusual question, but is there a way to stop the application module from connect to a DB? I know its purpose is to do so. But currently we are using ‘stub’ views and entities.
    In the executequery and dodml we wrote our own code to access data from webservices.
    We did this because we are also using JHeadStart which requires BC.
    It all works fine, but the application module needs a valid connection to a DB, although it will never query anything there.
    So is there a method which I can overwrite to make the application module think its connected to the DB but it actually isn’t?
    A second problem is most likely its state table.
    Anton

    Example #96 on my blog does this. It might have some useful clues.

Maybe you are looking for

  • Where is the frame rate setting control when making a slide show?

    I am trying to make a slide show using QuickTime Pro and cannot find the frame rate control.I put all my consectively-numbered jpegs in one folder. I then clicked on "File," the "Open Image Sequence," then a window opened up and I click on the first

  • Where can I download Adobe Premiere Elements 9

    I was just wondering if anyone knows where I can find a download for Adobe PE 9. I purchased the software several years ago, and I still have the serial key for it. However I cannot find my installation CD to reinstall the software onto my computer.

  • How to check if the module specified in RUN_PRODUCT exists?

    Hi, I use RUN_PRODUCT to call report in form. I have a problem that if the module specified doesn't exist, no error message will be prompted except a log the in Report Engine as follows: REP-0110: Unable to open file <module>. REP-1070: Error while o

  • Business Object Repository (BOR) in CAF

    Hi, The Business Object Repository (BOR) is the object-oriented repository in the R/3 System. It contains the SAP business object types and SAP interface types as well as their components, such as methods, attributes and events. Is there something si

  • Viewing order on iPad music app

    I use a PC with itunes.  When I sync to my ipad the playlists are not in alphabetical order.  How do I fix this?