Can't import 27 min clip.

Is there a work around? I'm really not interested in buying more software.

Hi
Can't figure out Your problem ?
Windows XP ?
AMD 64 ?
Where do Your movie originate from ? miniDV tape Camera ?
Via FireWire ?
To what program do You try to import it to ?
iMovie doesn't run on any Windows platform ?
Please describe: Computer, RAM, free space on internal hard disk
OS version, QuickTime version and movie editor name and version ?
Yours Bengt W

Similar Messages

Why i can't import a clip of AVCHD format from iPhoto originaly from my Sony NEX-5N

why i can't import a clip of AVCHD format from iPhoto originaly from my Sony NEX-5N?

Hi there. For anyone searching, here are the results of my research and corresponding advice back to Sony...
Thanks, your comments looked correct but did not solve my problem. You may be interested to know after much testing and research, I was able to ascertain that some of the camera's AVCHD settings iMovie cannot see at all (only some, which made it even harder to figure out!). Plus, if you have recorded movie clips in more than one format to the memory card (MP4 or any one of the AVCHD's), iMovie cannot see any of the AVCHD's.
Bottom line - forgo the benefits of AVCHD on the Sony NEX-5N and just use MP4 until Apple makes it easier.

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

Can't import hourlong clip - how to edit down?

I was going to import an hour long clip but apparently I can't import anything over 10 minutes. So, how do I edit the video into manageable segments without having to forkout for Final Cut Pro as recommended on the pop up?
I only want a bit of shareware...
thanks

You should still be capable of importing a lengthy video - iMovie just has a tendency (I don't know why) to break up long shots into 10 minutes clips that are still useable. Just drag all of the segments of the clip into the timeline - it should still play continuously without hiccups - just as it would had you split a video clip at the playhead.
If there are a great many segments, you can select them all (or a select number of them simultaneously) and bring them down into the timeline together in one shot.

Can't import video clips using Transfer Utility LE

I'm experimenting with my new VIXIA HF R50 camcorder. Having trouble getting the scenes onto my computer. Is it necessary to use Transfer Utility LE with this camcorder, or can I import them using my video editing software - Studio 16 Ultimate? I tried the latter, and it hasn't worked yet, but then nothing is working.

Hello Magnolia!
When saving movies on a computer, you can use Transfer Utility LE for AVCHD movies and ImageBrowser EX for MP4 movies.
Saving AVCHD Movies
With Transfer Utility LE, you can save to your computer the scenes you have recorded. Download the software and install it before you connect the camcorder to the computer for the first time.
1. Power the camcorder using the compact power adapter.
2. Camcorder: Press < > to set the camcorder to Playback mode.
3. Camcorder: Open the desired index screen for AVCHD movies.
4. Connect the camcorder to the computer using the supplied USB cable.
NOTE : Camcorder: When the [Select the memory for connection] message appears, touch [All (for PC only)].
5. Computer: Double-click the icon shown below to open the software Transfer Utility LE.
6. Use Transfer Utility LE to save your AVCHD movies.
Saving MP4 Movies and Photos
When saving MP4 movies to a computer for the first time, it is necessary to install theImageBrowser EX software..
1. Power the camcorder using the compact power adapter.
2. Camcorder: Press < > to set the camcorder to Playback mode.
3. Camcorder: Open the [Movie Playback] index screen for MP4 movies or [Photo Playback] index screen.
4. Connect the camcorder to the computer using the supplied USB cable.
5. Computer: Start CameraWindow.
6. Computer: Save the desired MP4 movies or photos to the computer.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Using Elements 8.0. Can't import *.mod clips

When attempting to import *.mod clips made on a Sony FS200, two things happen: (1) the thumbnail doesn't display, and instead I get a blue box and (2) I get an error message saying:
"The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed."
I tried installing the DIVX codec on the suggestion of the tech at Staples. Didn't work.
Does anyone have a fix for this? Would it help were I to upgrade to 10.0?
Thanks.

See if this Adobe document helps:
http://kb2.adobe.com/cps/332/332125.html
Ken

Can't Import Sound Clip into Flash CS6

I clipped a song using Audition and added a fade. I exported it to MP3.
I need to import that clip into Flash. I tried: FILE>IMPORT>IMPORT TO LIBRARY
It read: Couldn't Import (file name)
I tried to convert the sound clip to a .wav file and ran into the same problem.
I tried to drag and drop into the library. Same problem.
I am a novice at Flash. This is for a school assignment. It worked in class but not at home. I am using WINDOWS 8.1 and have a creative cloud version of flash (which I THINK is CS6).
Suggestions?

Fix: I converted it to a .wav file and everything was a-ok.

Premiere 6.02 - can't import video clips from a different editing program

If anyone has an answer I would really appreciate it. I am using Premiere 6.02 and XP. I have a 80 GB hard drive, 256 mb ram, and 1.7ghz. I have about 9 minutes of footage that I captured on MGI's videowave 4, which came bundled with my computer from Dell. It seems that I have to import the entire 9 minute clip from videowave into premiere to be able to edit it with premiere. I have been able to carefully make a few very broad edits of this 9 minutes in my premiere timeline, however, everytime I try to open it up I can't even make a single move before premiere is not responding and it has to close down. Is there anyway around this so I can utilize this 9 minutes by adding audio tracks, fades, and specific cuts? I have to be able to use this footage. Any suggestions would be great. Also, are there any chat rooms that exist where people discuss troubleshooting issues with premiere? Thanks for taking the time to read this.
Ryan
[email protected]

Thanks for the help. I'm in a bit of a tough situation right now.Again I have xp with 1.7 ghz, 256 mb ram, and 2 hard drives ( 40 gb and 80gb) with approx. 75 gigs free space. I'm trying to save about 12 minutes offootage that i captured with videowave 4 from being totally useless. I know you suggested to me that i convert from avi 1 files (videowave) to avi 2files (the only files premiere 6.0 accept apparently). I haven't been able to find anywhere online that has the software to do that with. My other alternative, considering the original footage on my camera has long since been erased, is to export from videowave to my camera and then import that footage into premiere and then i would be set. I wish I could. I couldn't get videowave to recognize how to "produce video" so I uninstalled and reinstalled. Now I am able to get all the way to the point where I'm simply supposed to choose "output to dv" under the output menu. When I click the dropdown menu the only option available is "full screen", which I tried anyway. It does play the footage on full screen, but it certainly doesn't capture the footage to my camera. I've looked everywhere on the videowave web site and their solutions are brief, difficult to understand, and inconclusive. Oh, something that sounds like a problem is when I reinstalled videowave it said something about missing a indeo codec. I looked for it in my video codec properties and found a couple of versions,but what I gathered from online research was that I might need indeo codec xp 5.2 (seeing as how I'm running xp) which costs $15. I thenlooked onlineto find that codec for free somewhere to no avail. HELP!!!! THANKS!!
RYAN

How can I import video clips from my Kodak Z740?

I have done this three times, and now I am unable to. I am losing my mind! I believe that when I did it before, I imported pictures first off the camera into iPhoto, then I pushed the import button again and the movie clips came in, which I then transferred to iMovie. This isn't working now. Help!

Hi Brealyn - welcome to iMovie Discussions!
Can you tell us more about what you are wanting to do?
Are you wanting to use movie clips from your digital still camera to make an iMovie video?
What part of the process is not working now? Are you able to import the still pictures into iPhoto successfully?
Can you also import the movie clips successfully, or is that the problem area?
If you have been able to import them, can you then not get them into iMovie?
Are you saying that you have succeeded three times in getting movie clips like that into iMovie?
Lots of questions!! Just want to clearly establish what you have managed before and what you cannot do now.
The following info comes from the iMovie Help Menu:
MPEG-4 video cameras (which yours is) may not have a FireWire connection, but have a USB connection. To transfer the video from and MPEG-4 device to your computer, connect the device to your computer using a USB cable. Your MPEG-4 camera or device appears as a hard disk on your desktop. You can open the hard disk icon and drag the video footage into your iMovie HD project or to your desktop for importing later.
When importing footage from an MPEG-4 device, your video is imported as a single clip into your project; iMovie HD does not break it up into cllps automatically. You cannot use the capture controls to import your video or control your camera. You cannot use the Make a Magic iMovie feature to import video automatically from an MPEG-4 camera connected by a USB cable.
The Help Menu is really worth looking at.

Can not import video clips into iMovie from Photos

I have some clips that I copied from my GoPro to my iPad via the Apple Camera Connection Kit. When I open iMovie there are icons for the clips but iMovie will not import them. The format is H.264. Is there a way of tricking iMovie?

Here is the problem, Im making a movie, I took all the video on my Kodak V610 Camera. I have the clips in .mov format. The clips are stored on an external disk in my iPhoto library.
Your digital camera probably uses MPEG-4 video (compatible with iMovie '08 in combination with µ-Law 2:1 compressed audio (which is not iMovie '08 compatible). While using the MPEG Streamclip MPEG-4 conversion will work, the prefered methof would be to use the QT "Movie to MPEG-4" option in QT Pro (quicker if you have it) or GarageBand (via the "Expert Settings option) to "pass through" you video while converting the audio to AAC (MPEG-4 audio). A mono setting of 64 Kbps with a 44.1 KHz sampling rate is a bit of "overkill" with respect to the original audio but will be quality compatible with what iMovie uses for its output presets.

Can I import movie clips to imovie from iphoto?

I am having difficulty importing Iphoto video into the imovie. Any suggestions?

Process the Movie in iMovie then export it as a mov file to the finder and then import to iphoto.
Regards
TD

How to import movie clips from DVD?

Hi,
A really stupid question, and possibly this has been asked before, but I am at my wits end--is there a way I can import video clips to iMovie from a DVD disc that contains video files? When I try to select 'import movies' from the file menu, it won't import the clips because the video files contained within the dvd are VOB. IFO. and BUP. formats, and the iMovie will only read MPEG or mov. Is there a way I can somehow import these clips by changing the setting somewhere in the iMovie or am I to require some other type of application to convert these files before I can successfully import them?
I'm really only trying to make a simple short clip, nothing big. The longest it will probably be is at most 5 mins. Any suggestions?
Thanks!

Is there a way I can somehow import these clips by changing the setting somewhere in the iMovie or am I to require some other type of application to convert these files before I can successfully import them?
Not by changing a setting. Multiplexed MPEG-2 content is not iMovie '08 "edit" compatible. Either the content is recognized as being on a compatible camcorder and converts the content to an "edit" compatible compression format or you must manually convert the multiplexed MPEG-2 content yourself for import at the "Finder" file level.
Any suggestions?
If your VOB files are not encrypted (i.e., on a homemade DVD), then they can be copied to your hard drive. Once on your hard drive, you can use any of several applications to perform your conversion. Cost and work flow depend on the application you use. I normally recommend a new user try something like iSquint for their initial attempt. It is free and simple to use. Simply drop the copied VOB file containing the video you want to the application work area, set the "Optimize for TV" option, and press the "Start" button. This will produce an MPEG4/AAC file that can be edited. Other applications can produce alternative compression formats for editing but are either more difficult to use or are not totally free. My preference would by MPEG Streamclip here, but it requires a $20 QT MPEG-2 Playback component and s much more difficult to use since it has many more options and capabilities. Visual Hub (iSquint's "big brother") is as simple to use, but is a "pay-ware" application. In any case, the free application should allow you to do what you want and then you can decide if you need/want to invest more in the way of cost, time, and/or effort in a better application.
I use Quicktime pro as well to export any file to a version that iMovie will work with
Unfortunately, QT Pro will not work in this case since QT Pro is not conversion compatible with multiplexed MPEG-2 formats. Even if you add the $20 QT MPEG-2 Playback component, it will only convert the video portion of the file. Use an MPEG-based, third-party application like those mentioned above or FFmpegX (donation-ware/difficult to use) or MPEG2 Works (Pay-ware that also requires the $20 MPEG-2 component, etc.

Can't import .mov file into iMovie

I have a video clip in .mov format that won't seem to import so that I can edit it. I'm a guy who's worked with windows for years and I am Mac illiterate. Is there a reason why I can't import the clip, but it still plays in quicktime?
G5 Mac OS X (10.4.4)

Hi Solace,
welcome to this forum
to give you some background info for better understanding in the future:
the file extension".mov" is a bit irritating, should NOT be translated with "movie"! a .mov is just a socalled container, it can contain (sic) many kind of media: stills, music, VR...- and for sure video.
just to impress you, have a look in this list:
Apple's list of formats supported by QT
iMovie is an edit-app meant to work with firewire-connected miniDV camcorders..... you can import "other" files&formats, but then it gets a bit tricky....
so, my usual guess, you're trying to import some mpegs (contained in a .mov file, you don't read .mpg as suffix.....)
some very good advices here, in plain english:
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
have fun with your Mac!

A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip: So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email come

A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip: So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email comes through empty. Please help.

Copy that voice memo, create a new email and paste it and send it to yourself! You can save it to your computer now and send it to someone else

How do I add e-mail addesses to my new ipad mini or can I import them from my PC - e-mail otherwise working OK?

How do I add e-mail addresses on my new ipad mini or can I import them from my PC - e-mail othwise working OK?

You have to manually add:
Settings > Mail, Contacts, Calendars > add here
Read here: http://help.apple.com/ipad/7/#/iPad995bb603

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyone

BaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect.

Can't import 27 min clip.

Similar Messages

Maybe you are looking for