Can't import a JPEG: "video bit depth of this file is unsupported"

Re above error message when attempting to import into a Premiere CS6 project.  I used Media Info to inspect the file's properties as per below. All of the video in my project  is 8bit video. Any help is much appreciated..
Image
Format                                     : JPEG
Width                                        : 1 306 pixels
Height                                       : 979 pixels
Color space                             : YUV
Bit depth                                   : 8 bits
Compression mode                : Lossy
Stream size                              : 2.83 MiB (100%)

Hi Jeff, thanks!!
I guess one cannot import cannot import a CMYK image in Premiere at all.
When I inspected the image in Media Info it ID'd it as a YUV and so I assumed that the imagwe was converted for use in a video that they'd created sometime in the past.
Is there even such a format as YUV for still images? Probably not even though Media Info ID'd it as such.
Anyway, Photoshop ID'd it as CMYK and when converted to RGB that did the trick! 
Thanks!

Similar Messages

  • Iphone 4s - How can I import photos or videos from a PC

    Iphone 4s - How can I import photos or videos from a PC

    You can't, natively with the iPhone. The photo sync is one way: computer to phone. To do what you want requires third-party software, like this:
    http://www.ecamm.com/mac/phoneview/

  • How can i import songs or videos from my iPod to my computer?

    How can i import songs or videos from my iPod to my computer?
    iTune doesn't seem to be able to get this done...

    You can't sync your music back from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. They will all transfer songs but if I recall, only iPodCopy also does videos.
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    iGadget Windows Only
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes

  • I can't import and view videos from a camera.

    I can't import and view videos from a camera.  Even if I open the file and copy the .avi files onto the hard drive.  I have tried iMovie, Quicktime, and Flip player.  Flip player will open it but I only get the audio,  Quicktime freezes, and iPhoto tries to automatically import only to then error saying the files are not compatible.

    Hello Hese,
    try the following:
    1. delete preferences (com.apple.iMovie.plist) and empty the trash
    2. repair disc permissions with Disc Utility and reboot your mac
    3. use Diskwarrior or MacJanitor for disc clean-up
    4. disconnect any other firewire devices
    5. take off any non-system desktop pictures
    If nothing else helps, you might want to consider resetting your Firewire port(s)
    How to reset your Firewire ports:
    http://discussions.apple.com/thread.jspa?messageID=2001817&#2001817
    hope this helps
    mish

  • HT204053 sir; i can't import song and videos from pc to my iphone pls help me

    sir; i can't import song and videos from pc to my iphone pls help me

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - if you would like help then you will need to provide more information than 'can't import' e.g. how are trying to sync content and what happens when you do it ?
    You have the latest version of iTunes installed on your computer, and your phone appears in it when it's connected to your computer ? If not then see if this troubleshooting page helps : http://support.apple.com/kb/TS1538
    You should be able to sync music and films/TV programmes by selecting your phone on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via control-S on a PC) and then using the tabs on the right-hand side of the iTunes screen to select and sync your content
    Is that how you are trying to do it and it's not working ?
    If you haven't synced your phone to that computer before then you may also find this page useful : https://discussions.apple.com/docs/DOC-3141

  • Premiere CS4 - How can you import QuickTime (.mov) videos and which settings for the sequence?

    Premiere CS4
    How can you import QuickTime (.mov) videos and which settings for the sequence?
    Please reply in plain English or if possible in German
    Greetings from Vienna, Peter

    I have not installed Quicktime.
    I got a few scenes (.mov) from a Canon Eos 70d.
    I want to create a short film (in Premiere CS4) with these scenes, mixed with photos and MP3 music.

  • How can i import contacts from another AIM account to this new one

    If you reference my last ichat question, you will see that I have had serious problems and had to create a new account.
    How can I import contacts from another AIM account to this new one??

    Hi,
    Use AIM for Mac and use the Export and Import features.
    Other than that it is a question on making sure every Single Buddy has more than just their Screen name in the IChat Address Card so it is added to the Address Book and dragging them back from there
    9:08 PM Thursday; February 7, 2008

  • HOW TO FIX IT, GARAGE BAND FOUND  AUDIO FILES IN 8 BIT FORMAT. THIS FORMAT IS UNSUPPORTED AND CANNOT BE PLAYED

    HOW TO FIX IT, GARAGE BAND FOUND  AUDIO FILES IN 8 BIT FORMAT. THIS FORMAT IS UNSUPPORTED AND CANNOT BE PLAYED

    Hi..
    Post your topic in the GarageBand community >  GarageBand for Mac: iLife: Apple Support Communities
    More GB users will see your post there.

  • Importing audio - sample rate/bit depth

    Hi forum,
    I am working on project at 44.1K, 24 bit. Audio elements are being sent to me to be added. Some have come in incorrectly; at 48K, 16 bit. I can convert easily but didn't think I needed to.
    I thought by selecting the "Convert Audio Sample Rate When Importing" option when creating the project that would all be worked out.
    That is what I've done - and the file seems to be the correct pitch -- yet shows up in the audio window with it's original specs (48/16). Also ... will logic keep it at 16 bit and play all other files at 24 bit?
    I want to be sure about this ... something seems fishy.
    Cheers
    Dee, Ottawa

    Hi,
    I am re posting.
    Regarding the same project: must everything in the arrange window of a project be the same sample rate (and bit depth). My understanding is that there is real- time conversion during playback. That all file types supported by logic - and all virtual instrument samples are converted in real time to conform to the selected bit depth and sample rate of project.
    I ask only as I recieved reference sound files to temporarily place in a mix to see how mix will sit when going to Post. Two audio files are almost a semi tone higher than they are supposed to be (which is odd - so I am pretty sure it was just quickly sung in the wrong key at there end). And one file which was supposed to be timed out is not lining up.
    I can work around this on this project. And I can simply convert in the sample editor and re import to compare.
    But again ... I just want to check my understanding for future reference. The manual indicates differing rates etc should not be a problem. (ie: That Logic allows one to have differing rates and bit depths. Inversely, the M Sitter video implies just the opposite.
    I just want to be sure of this for future reference. Any adive?
    Thanks in advance.
    Cheers
    Dee

  • How can I import only jpeg and not jpeg plus RAW into Photos on iPad?

    I capture both on my camera.  I do post-shoot processing on computer (Lightroom/Photoshop) but want to see larger previews on iPad (the "new" version with retina display) than my camera LCD allows.  I am using the Apple hadware adaptor to load from an SD card.  The RAW files are taking up way too much memory on the iPad--it seems Photos imports both files at once.  I can't figure our how to tell it to import only the smaller JPEG files.
    If there is a better App than Photos for this, please advise.  Note I will not be doing any serious editing on the iPad.
    Thanks,
    Doug

    It doesn't matter what App you use it will copy all the photos from the SD card.
    But I have a workaround;
    All you do is import your JPEG+RAW images using the camera connection kit.
    Go to Albums in the Photo App, choose Change, Choose New Album, give name, choose Last import, choose Select all photos, choose Finish.
    Now go back into the photos app and delete all the photos from your "Last import" Album. It will say that it is going to delete them everywhere but really it doesnt because it leaves the JPEG in the new album. The result is that you will only have your JPEGs that you imported in your camera roll and the RAW images get deleted.
    First try out before you delete photos from SD card!

  • Can't import ESP mode Video into iMovie...

    I can't import video recorded in ESP mode into iMovie or Final Cut. Is there some trick to it, or am I kinda screwed?? PLease help me if you can..

    If your camera has analog inputs, then yes. Unfortunately, today that's a big "if" as most cameras only has analog OUTputs (to play on a TV).
    From VHS to DVD
    Give New Life to Old Movies
    http://www.macworld.com/2004/05/features/fromvhstodvd/

  • Can't import my photos/videos to my computer

    Since the new update, I can't import my photos or videos taken on my iPhone 4 to my PC (HP). I have always just linked my iPhone to my computer and a file would be created in my Pictures folder. Now I can't seem to upload anything from my iPhone to my computer. Need some help... Any suggestions?

    Still not able to import pictures to my computer. Can anyone help?

  • FCE 1.0.1 Can't Import "Original" JPEGs - FCE 3.0 Can !

    Not a serious problem - just a puzzling quirk.
    When I try to import JPEGs which have been produced by my digital camera, FCE 1.0.1 shows them greyed out and impossible to select.
    However, if I make a copy (or in any way manipulate the JPEG) in Photoshop and save it, it shows up nice and black and can be imported.
    FCE 3.0 works perfectly with either an original camera image or a copy.
    Can anyone explain why FCE 1.0.1 behaves in this strange way?
    What is the difference between the original and a copy? They are both JPEGs after all.
    Ian.

    Thanks Al.
    I think this my be one of those mysteries like the Meaning of Life!
    There seems to be no logical reason. The JPEGs from my camera are perfectly bog-standard and are recognised by everything including FCE 3.0 but 1.0.1 doesn't.
    I tried to save the JPEG in Photoshop and it was still grey.
    However if I use the "Save As" command the newly saved version can be imported into 1.0.1 with no problem. Somehow the "Save As" command must be imparting some subtle change in the format that 1.0.1 can detect.
    This has no practical impact on my life because normally I will never use 1.0.1 for that - it's just that I don't like mysteries.
    Ian.

  • Can't import a jpeg file to iPhoto

    Hello,
    I'm having trouble importing a jpeg file from another user to my iPhoto. We are both admins, file sharing is on for both users, read and write is on for both users. (I toggled file sharing on/off to see if it would update, and no changes).
    In the file sharing, the shared folders are documents, pictures, and downloads folders. The jpeg file is filed on the desktop and in the pictures folder. When I do a File/Import to Library, and search for the jpeg file, it comes up greyed out.
    My last option is that I emailed the jpeg from the other user's iPhoto to myself. I was going to go into my email and see if I could save the jpeg and try to import it that way?
    Any suggestions? Thanks! 

    Have you tried just dragging the file into the open iPhoto Library window? What version of iPhoto are you using? 
    What color mode (RGB, grayscale, CMYK, etc.) is it and what color profile is embedded (sRGB, Adobe RGB, Dot Gain 20%-grayscale, CMYK)?
    OT

  • Can't import sims 3 videos on to imovie

    Hi guys,
    I have been trying to import my sims 3 videos on to imovie and for some reason, it won't import and I have tried to covert the file from avi, to mpeg and other file names, nothing seems to be working, what would be the solution to my problem and I am sure I'm not the only one. Also I don't want pay extra for a converter, as I don't have that kind of money to spend on these things, as I am a student and money is tight, so bare that in mind thanks guys, really appreciate if could get responses 

    Here is a good Tutorial I found on YouTube. The video is for iMovie 09, but the process is the same for iMovie 11.
    Keep in mind that if you shoot in 60P, you would need to convert to 30P before using in iMovie. Final Cut Pro X supports 60P natively.

Maybe you are looking for

  • Interfaces, Abstract Classes & Polymorphism

    I have a friend taking a Java course as part of a larger degree program, and she's asked for some help with an assignment. The assignment is as follows: This assignment is to write a simple encryption/decryption application.  There will be a single a

  • ME_READ_PO_FOR_PRINTING - Deleted Items

    Hi, I am using the FM ME_READ_PO_FOR_PRINTING . If i pass 1 to cx_druvo , I am getting all the items displayed in my Form. But if an item is deleted, that item does not get read with cx_druvo = 1. For that I need to pass cx_druvo = 2. But with cx_dru

  • Frame icon for JDialog

    Hi all, I have a JDialog which is passed an instance of JFrame as parent component in its constructor. The problem is that if i set the dialog as non resizable, the icon that appears in title bar(top left corner) goes. It is visible only when the dia

  • How to upload/download screen from one report to another report

    Hello experts , I have to upload a screen from a report say zrept1 screen 0100 to another report say zrept2 screen 0100. Please , reply . regards, Jeet Moderator message: standard SE80 functionality for copying objects, please do more research before

  • Query assistance - Based on CurrentDate

    Hi, I need to create a query for a daily alert. I need the result to list customer records that have the UDF value (number) match the today's date. Ex. if today is May 4, it would list all customers with invoice date of 4 (UDF value). Below is what I