Can't import from camcorder to firewire drive

I'm having no luck importing video from a digital camcorder to an external firewire drive (using iMovie 6). The playback is OK, but when I try to import the screen quickly goes blue and the importing stops (I get about .5 second of video in a clip before it stops).
This only happens when I'm saving clips to the external drive. If I save the project on my internal hard drive, video imports fine. I've tried with the camcorder daisy-chained through the firewire drive (on my ibook), and plugged into a separate port (on an old iMac w/ dual firewire).
Could it be my firewire drive is too slow to record the video? It's an Acomdata E5, 320gb 400 Mbps drive, formatted Mac OS extended (journaled).
I tried to measure the speed of the disk using Xbench, but not sure how to interpret the results:
Disk Test 34.78
Sequential 26.56
Uncached Write 11.57 7.11 MB/sec [4K blocks]
Uncached Write 55.80 31.57 MB/sec [256K blocks]
Uncached Read 31.14 9.11 MB/sec [4K blocks]
Uncached Read 70.67 35.52 MB/sec [256K blocks]
Random 50.36
Uncached Write 21.41 2.27 MB/sec [4K blocks]
Uncached Write 97.27 31.14 MB/sec [256K blocks]
Uncached Read 83.42 0.59 MB/sec [4K blocks]
Uncached Read 95.71 17.76 MB/sec [256K blocks]
Are there any settings I can adjust or other things to try?
Thanks for any pointers.
ibook dual-usb   Mac OS X (10.2.x)  

You don't say which camcorder you're using.
Many Canon camcorders will NOT work properly with anything else, e.g; an external disc, on the FireWire circuit. Sorry. For those, you'd need to import to the internal disc and then copy to the external, and continue editing with the external drive.
"..Could it be my firewire drive is too slow to record the video?.." No: all modern external FW drives are perfectly fast enough, and a 320gb is certainly a modern drive.
"..formatted Mac OS extended (journaled).." ..are you absolutely CERTAIN..? ..It needs to be, otherwise it'll do just as you describe. And even discs bought for Macs or from Mac stores generally come formatted as "PC Exchange", i.e; MS-DOS formatted. Check it again by right-clicking or Ctrl-clicking it and use 'Get Info'. If it really says "Mac OS Extended" you're OK. If not, you'll need to use Applications>Utilities>Disk Utility, select the name of the disc and click the 'Erase' tab (after you've moved off the disc anything which you might want to keep) and then select 'Mac OS Extended'. CAUTION: be sure that you've selected the external drive: don't accidentally reformat and wipe your internal drive!
"..Are there any settings I can adjust or other things to try?.." No. However..
Some camcorders are not properly recognised by iMovie at first. It pays to open a project which already has some footage in it, play that and then attach the camcorder and try importing. Playing back some existing DV footage often - in my experience, anyway - 'kick starts' the program into accepting more footage from the attached device.
But that only works if (a) the drive DEFINITELY is formatted as Mac OS Extended, and (b) you're NOT using a Canon with an external disc..

Similar Messages

  • Can't import from camcorder with iMove '08

    I'm no longer able to import my movies from my Sony camcorder. I was able to do so in July so I'm assuming there's a problem with the latest software. The camcorder is connected via USB (it show its connected) but iMovie does not come up with the import prompt it used to, nor can I select from Import (it only shows the built-in camera). I have more then enough space, I've tried multiple USB cables, even disconnected everything else, re-booted, powered down the camcorder--everything. Please help, this is very frustrating!

    You don't say which camcorder you're using.
    Many Canon camcorders will NOT work properly with anything else, e.g; an external disc, on the FireWire circuit. Sorry. For those, you'd need to import to the internal disc and then copy to the external, and continue editing with the external drive.
    "..Could it be my firewire drive is too slow to record the video?.." No: all modern external FW drives are perfectly fast enough, and a 320gb is certainly a modern drive.
    "..formatted Mac OS extended (journaled).." ..are you absolutely CERTAIN..? ..It needs to be, otherwise it'll do just as you describe. And even discs bought for Macs or from Mac stores generally come formatted as "PC Exchange", i.e; MS-DOS formatted. Check it again by right-clicking or Ctrl-clicking it and use 'Get Info'. If it really says "Mac OS Extended" you're OK. If not, you'll need to use Applications>Utilities>Disk Utility, select the name of the disc and click the 'Erase' tab (after you've moved off the disc anything which you might want to keep) and then select 'Mac OS Extended'. CAUTION: be sure that you've selected the external drive: don't accidentally reformat and wipe your internal drive!
    "..Are there any settings I can adjust or other things to try?.." No. However..
    Some camcorders are not properly recognised by iMovie at first. It pays to open a project which already has some footage in it, play that and then attach the camcorder and try importing. Playing back some existing DV footage often - in my experience, anyway - 'kick starts' the program into accepting more footage from the attached device.
    But that only works if (a) the drive DEFINITELY is formatted as Mac OS Extended, and (b) you're NOT using a Canon with an external disc..

  • Can't Import From External USB Optical Drive

    I have an External USB cdrom drive that I want to use to rip my music collection to my iTunes library. When I put in a CD, iTunes looks up the information and offers to import it to the library. I click okay and it goes ahead. It takes a whooping 5 seconds to rip the whole cd . The files are only 51Kb or 80kb in size and are unplayable. The built in DVD Burner in my laptop works fine for ripping cds but I don't want to put the un-needed wear on it because portable drives don't last long. The drive inside the enclosure is brand new and has previously worked fine at everything else. Has anyone else encountered this problem? Any solutions?

    hmmmm. do you have "Error correction" switched on in your Importing preferences? if so, does switching that off help with the importing issues?
    if no joy there, perhaps some of the other usual suspects from the following document are worth checking on:
    You can't import or play music from an audio CD in iTunes for Windows
    ... and these resources might be helpful with that:
    Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
    iTunes for Windows: Updating the firmware on your CD or DVD drive
    Updating the drivers on your Windows PC
    Where to find firmware for your CD/DVD drive

  • Can I boot from an external Firewire drive?

    I have restored my internal system drive (27GB) to a 100GB partition on a 300GB external FW drive (as a backup).
    Using System preferences I changed the startup disk to be the clone & rebooted to test.
    No start and the only way to get going again was to turn the FW drive off & reboot.
    Is it possible to boot from a FW drive?
    Should a drive as described be bootable?
    Any thoughts will be appreciated.
    John

    Thank you all for your input.
    After some trial & error (& little sleep last night) I have made some progress:
    Further research suggested that:
    1. there may be a hardware issue with my Ex FW case (it has a Prolific PL-3507 chip)
    2. Tiger (10.4.x) behaves differently from Panther (10.3.x) and possibly different versions of Tiger may behave differently
    Also I have previously successfully used DU to move my OS from a 30GB to 120GB disk (both internal drives) under 10.3.9. This disk will boot when placed in a ext FW case.
    I concluded that under 10.3.9 at least my case was OK & Apple DU was OK when run from the boot volume.
    I also checked the clone made using DU under 10.4.3 by taking the HDD out of the FW case & installing it internally in my Mac - it wouldn't boot so DU hadn't made a bootable clone - it was never going to boot internally or externally. Ever.
    Next step - SuperDuper! - worked perfectly - backed up & booted no fuss, no worries.
    This confirms that the Prolific PL-3507 chip will boot an external FW disk under OS X 10.4.3.
    I then referred to Lee Cullens' posts as quoted by Matthew Whiting (with a link above in this topic).
    Lee has the answer (at least for my hardware/software configuration). For Apple's DU to produce a bootable clone it cannot be run from the disk which is being cloned (ie 3 volumes are needed
    1st to boot from & run DU from
    2nd to be cloned (the vloume to be backed up)
    3rd to be colned onto - the backup
    I tried DU from the boot disk again to "prove" it wouldn't work. While it appeared to clone correctly Permissions were all messed up & after over an hour of "Repairing Permissions" I gave up. The volume wouldn't boot even though system preferences saw it as a bootable volume.
    I then ran DU from another volume (the one made using SuperDuper!). After verification (but not repairing permissions as I didn't want to potentially waste another hour!) it booted fine from the ext FW drive. I did however uncheck "Ignore Ownership" after Cmd-I on the volume from the desktop.
    I conclude:
    My hardware is OK (& probably others who may have similar issues)
    Apple DU can make a bootable clone which will work on an ext FW drive PROVIDING 3 volumes are used - boot with DU on, from & to. Suitable for a bootable backup but a bit fiddly ( also free & regularly updated by Apple)
    SuperDuper does the same job with less fuss (don't need a CD or 3rd volume + other features). As noted by Matthew basic cloning is free but I think the shareware cost will be worthwhile ($US27.95)
    SuperDuper! here: http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    Thanks to all for their input.
    I now have an answer that I'm more than happy with.
    John

  • Why can't I edit the photos I just imported from a usb flash drive?

    Why Can't I edit the photos I just imported from a usb flash drive? I scanned them into a desktop pc, copied them onto a flash drive, imported them into iphoto. Once I remove the flash drive I'm unable to edit them. Says it can't find the original...or something like that. I appreciate any help you can give me! Trying to get a slide show ready for a funeral, therefore I have an approaching deadline, eek!

    Copy the photos from the drive to your desktop import then again and delete the images. If the same mistake appears, there is something wrong with your import settings into iPhoto - > may be you didn't imported the original files to your iphoto library.

  • Import from camcorder stops after few seconds. Never used to! Ideas?

    Hi you wonderful experts and enthusiast out there.
    Been using iMovie HD 5 successfully for a couple of years, but all of a sudden I can't import from my camcorder. I have a long, unbroken, recorded sequence on the camcorder, but when I go to import iMovie imports just a few seconds before stopping. And if I hit import again it does the same, but the "bits" don't match exactly so I cant even splice them together. Which leaves my with no idea how to proceed.
    I did wonder if the movie was already too full (unlikely, but the same happened on a brand new movie) and also whether the DV tape was just too old (but the same is happening with a brand new tape).
    It's a Canon MV960, if that helps.
    ANd if I can't use iMovie to import it - is there another way? (Like I can use image capture in place of iPhoto if I so desire.)
    Message was edited by: Trevor C

    Hi
    My list of what to try:
    Test another FW-Cable.
    The GarasgeBand trick. Start GB save a fake project close it. Now try iMovie again.
    Test Your Camera on another Mac so that DV-in still works OK
    Toogle in iMovie pref: Play-back via Camera (on<->off some times)
    Other ways to import Your miniDV tape:
    Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    Using WHAT ? :
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    Free space on internal (start-up) hard disk ? (Others don't count)
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Delete iMovie pref file may help sometimes. I rather start a new account, log into
    this and have a re-try.
    from LKN 1935:
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten:
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check:
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    Yours Bengt W

  • I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

    I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
    I have iPhoto version 9.1.5 (615)
    Mac OS X version 10.6.8
    I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
    if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
    if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
    if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
    Any help would be greatly appreciated

    Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
    The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    For the annoying start-up message:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • Can't import from Cannon HV20.

    I can't import from my Cannon HV20. The camera does not show up as an external camera. I just get the message "to import video, please connect a camera". I get the same message when connecting to my laptop and I have tried two different firewire cables. I have gone through the settings on the camera and I don't see anything that would prevent it. I have the camera in play mode and powered on. I have successfully imported from this camera many times. This started yesterday when I plugged the camera in while using ichat and ichat crashed. I suspect the firewire connection on the camera is damaged.
    Any ideas?

    I have the same problem with a different camera.
    I have used my Sony TRV27 Handycam in making movies primarily with iMovie 6.0.3 on my former G5. It did record from the camera to iMovie 7.1.4 on my Intel core 2 but now can't get in to import to either program 6.0.3 or 7.1.4. It will not recognize that the camera is attached or switch the camera icon to camera mode. If it does it only shows Built in iSight or Time Lapses.
    I prefer to use the older iMovie camera because of the options and familiarity of it. I do not care for the newer iMovie program format.
    I went to the system profiler as suggested and found firewire but have no idea what the Firewire Device Tree looks like nor did I see anything on the right except Firewire Bus speed.
    I have been using the cord from Sony in the past to import movies. My computer does not show the camera even though in Finder/Preferences connected services are checked to show up on the desk top.
    I phoned Apple Care today and got virtually no help. The gentleman kept saying it was the camera that was at fault. Or it was the ? slot in the computer that wasn't working. They both work. I checked. I see by posts a lot of other camera owners are having similar problems.

  • Can't import from Sony XDCAM memory card to FCP 6

    I can't import from Sony XDCAM memory card to FCP 6.01 HD. Am using Macbook Pro, 2 gig of RAM. This is my first time NOT using tape. I can copy the files off the memory card onto an external drive (to free up the card for pro crew's next day's shoot), but can't import either to FCP. Do I need to convert the files in some way before FCP can read them? Need to fix this problem fast as the crew are off to Nepal for 2 week shoot.

    Laura,
    First, I'm assuming that you're referring to the XDCAM EX. You'll need to install the FCP 6.0.2 upgrade, which contains the XDCAM EX codecs.
    Second, You'll need to install the PDZK-P1 Transfer Application, and use that to import your EX clips into FCP. I just noticed that there is a new version available, 2.5.1 which is labeled specifically for Tiger/Leopard. I haven't tested this version yet, and will report back on any stability issues. We're currently running version 2.1.1, without many issues.

  • Tecra M2: Can I Boot from External USB/Firewire-HDD ???

    Hi All,
    how can I boot from an external USB Drive ?
    The Bios 1.20, 03/15/2004 doesn't seem to support this on my Tecra M2.
    I have an Maxtor 300Gig external HDD which can be connected via Firewire or USB. Usually I am using an Firewire PCMCIA-Card to connect this HDD, which has 3 partitions on it.
    Would it also be possible, to Boot via PCMCIA-Firewire ?
    Many thanks in advance.
    Lembong

    Hi
    As far as I know its not possible to boot from a USB HDD. I know that in some cases its possible to boot from compatible USB FDD and CD/DVD drives but note from HDD.
    This theme was disused a lot of time here in the forum.
    Please check this other posting:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4534&messageID=14824#14824
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8963&messageID=31325#31325
    Regards

  • Booting os x from *partitioned* external firewire drive?

    Hi all,
    my internal hard disk (on a 12" powerbook G4 867 mhz running osx tiger 10.4.10) has started acting weird (many people are reporting failing hard drives, and I'm assuming mine is failing too), so I'm preparing for replacing it with a new hard drive.
    I've backed up the drive to an external firewire drive (LaCie portable 80 GB firewire drive "Design by F.A. Porsche") using Carbon Copy Cloner with the option 'make bootable' selected.
    PROBLEM: I can't boot OS X using my clone on the external drive.
    I'VE TRIED:
    1. holding down Command-Option-Shift-Delete while booting to bypass the internal drive. (This didn't work: I saw an os 9 icon blinking/alternating with a question mark for a while, and then the computer booted from the internal hard disk.)
    2. holding down Option to select the external drive in Startup Manager. (Didn't work either: Startup Manager opened fine, but only showed my internal drive volume. I tried clicking the 'rescan' button, but it couldn't find my external drive.)
    3. SELECTING THE EXTERNAL DRIVE under Startup Disk in System Preferences. Note that the external drive volume *did show up* there. So under some conditions at least, the external volume is identified as a bootable volume. (This didn't work either, though: When I shut down the computer and booted up with the external drive connected, it still booted up from the internal drive.)
    POSSIBLE EXPLANATION?
    My external drive is partitioned into three partitions of different formats:
    1. "Mac OS X Extended (Journaled)"
    2. "Mac OS X Extended (Journaled)"
    3. "MS-DOS File System (FAT32)"
    The bootable volume is the first partition with the os x format.
    Could my problem be caused by this partitioning of my external drive?
    Either way, what to do?? I hope some of you savvy people out there can help me out.
    Cheers,
    Philip

    Hi Philip,
    My problem has been fixed, & I imagine it's the same for you...:
    With the excellent help from Dave Nanian at shirtpocket.com - the developer of 'SuperDuper!' (thanks Dave - you rock!), the problem (as Michael suggested) is to do with the Partition Scheme of the drive.
    If your drive was like my portable LaCie Porsche drive, it was FAT32-formatted for PC out of the box. This format has an underlying MBR (master boot record) partition-scheme. When re-partitioning a drive in 'Disk Utility', the original partition-scheme sticks, so if you simply re-partition the drive to Mac OS Extended, it will still have an MBR partition scheme... which Macs cannot boot from!
    For a Power PC Mac to be able to boot from an external firewire drive, the drive MUST have an APM (Apple Partition Map) Partition Scheme underlying the Mac OS Extended partitions. To do this, click on the 'Options' button in 'Disk Utility' when on the 'Partition' page before partitioning. You will see the options:
    GUID Partition Table (for Intel Macs... (n.b. Power PC's cannot boot from a GPT drive))
    Apple Partition Map (to create a bootable drive for a Power PC Mac)
    Master Boot Record (to create a bootable PC drive)
    So.... to make your external drive bootable for your Powerbook G4, choose 'Apple Partition Map' in the 'Options' page prior to partitioning.
    Special note about Intel Macs: Contrary to info supplied by Apple, an Intel Mac CAN boot from an APM-partitioned drive (this is why the OSX installer can be univerally bootable!), BUT, the problem is that the OSX installer will NOT let you install OSX-intel on an APM-partitioned drive....
    You can, however, clone an Intel-Mac-OSX internal drive that has a GPT partition-scheme (using CCC or SuperDuper) to an external drive with APM, & the Intel Mac will still be able to boot from that clone...
    The only real use for doing this, though, is if you want a multi-partitioned backup drive with separate bootable partitions for OSX-PPC & OSX-Intel machines. (Remember that a PPC machine cannot boot from a GTP-partion-scheme drive, hence the need to use APM in this instance seeing as the Partition Scheme applies to the entire drive (it can't be different for each partition.)
    Good luck - let us know how you get on!
    Jason

  • Starting up from external partitioned firewire drive

    Hi all,
    I have a lacie external firewire drive. I have it partitioned. One partition has a copy of OSX. If i start up on my main drive and set the "start up disk" preferences to the OSX partition on the external drive my G5 will start up on the OSX partition.
    However, if i don't set the "start up disk" preferences to the partitioned firewire drive and i try holding down the "option" key during a cold start the G5 won't recognize the partitioned OSX as an option.
    I want to have this external copy of OSX as an emergency start up using the "option" key during a cold start.
    For the last two years i've used a non-partitioned external firewire drive with OSX installed as an emergency start up disk and the G5 has always recognized the drive while holding down the "option" key from a cold start.
    Now that i have OSX on a partitioned external drive, a cold start holding down the "option" key won't recognize the external OSX.
    Any ideas?
    Also, if i'm not able to start up from this partitioned firewire drive, are there any special instructions for creating a DVD copy of OSX to use as an emergenct start up disk?
    Paul

    Allan,
    I can boot fine from the external, partitioned firewire drive if i first set my "start up disk" preferences to the external drive.
    But i if have my "system startup disk" preferences set to the internal drive (as it is normally), shut the machine down, then try a cold start holding down the "option" key, the G5 won't recognize the external drive (partitioned) as an optional system from which to start up from.
    In the past, i've dedicated an entire external firewire drive (NOT partitioned) as my emergency start up disk and when i did a cold start of the G5 holding down the "option" key, the G5 had no problems recognizing the external (not partitioned) drive as an optional system for start up.
    I'm wondering if by partitioning the external firewire drive i have some how rendered the external drive useless as an alternate start up device.
    Questions, questions ...
    Paul

  • All clips missing after import from camcorder!

    All clips are missing after import from camcorder - Canon ZR20.  For some tapes all clips are there, for others there are none.  All the files are there in the finder, but I don't know how to have them show up in Final Cut Pro X.
    Any suggestions?

    Ok - this is frustrating.  I have been importing my old miniDV tapes again into FCPX as I wasn't able to transfer all of these projects from iMovie - don't get me started...  After importing about 7 of the tapes the first 3 came in fine, but the last 4 didn't have any clips as I said in my original posting.  Now after restarting FCPX a couple of times all of a sudden the clips are all coming in!  Strange!  Guess I'm OK now.

  • Trouble with installing 10.5 from an external firewire drive

    I have a family pack of 10.5 and installed it just fine on my macbook. But, I'm having trouble getting my imac DVD player to read the DVD. It just spins and spits it out, and spins and spits it out. The imac is not covered under applecare so spending money to get the DVD drive fixed (which I barely use) is not something I want to do right now.
    Anyway, I followed instructions on a this website to install 10.5 from an external firewire drive. (http://iuseapple.com/blog/apple-how-to/advanced-os-x/2007/10/29/how-to-install-l eopard-from-external-firewire-hard-drive/)
    But I get stuck and am not able to actually get my imac to boot from the installer. Basically, I am able to use disk utility to create a copy of the disk image on my macbook. That resulting file ends in ".cdr" and it mounts when I double click it.
    And I partitioned my firewire hard drive without problems.
    I think I'm messing up when it comes to doing the restore. If I try to drag the .dmg mounted file in to the "source" it doesn't work (is greyed out). If I try to drag the mounted .dmg there than it works, but I get an error when I click "restore" (something about scans and images not being found). I tried physically copying the .dmg file onto the partition, but then when I plugged the HD into my imac, I wasn't able to get the imac to boot from the installer.
    What am I doing wrong? If someone could walk me through these last steps I'd appreciate it!

    Okay I finally got around to creating the bootable disk image of 10.5 using Carbon Copy Cloner. Still my iMac is not booting from the firewire drive!
    Here's a recap of everything I've tried. I'm at a complete loss now!
    - I partitioned the HD into 2 partitions-- a 10gig one for the 10.5 install, the then the rest for Time Machine. I make the partition in Disk Utility on my MacBook.
    - I've partitioned the drive a few times-- always partitioning it in APM format (b/c it needs to boot my non-intel iMac).
    - I've created the disk image using "restore" in disk utility. I've again tried this a few times.
    - I am able to boot my MacBook from the disk image I create! So I know the FW drive is able to be used to boot from!
    - Here's what I've tried in terms of getting the iMac to boot from the FW drive. It always just boots to my internal drive instead. Sometimes I briefly see a folder and question mark. I've tried all 3 FW ports. I've selected the install partition at start up in preferences. I've also held down the option key at start up (only my internal drive shows) and I've held down command-option-shift-delete and again I get the question mark and it boots to my internal drive.
    - And I installed Carbon Copy Cloner and made the disk image that way on my macbook. Still, I tried everything and the iMac is not able to boot from the firewire drive!
    Since my DVD drive is broken, this is the only way for me to install 10.5! Help!

  • I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

    I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

    No I haven't formatted it, but don't really know how to either? I am a bit of a newbie at this and thought i just had to buy any memory stick and it would work. can you suggest how to format it for FAT32 ( I don't know what this is either ) as I will be using the memory stick for windows also at a later date.
    Thanks for your reply

Maybe you are looking for