Can't import from iMovie HD

I can't import my iMovieProject files from iMovie HD (the one that came pre-installed with tiger in '06)
It creates a blank file in iMovie '08.
Any ideas?

Unfortunately you can't. I tried this awhile back and it actually messed up my imovie file completely (good thing I had it back up).
You can still take your iMovie HD project and put it into the new iDVD but you have to export it into a Quicktime movie first.
I hope this helps,
-HookedonMac

Similar Messages

Importing from iMovie 09

I have iMovie 09 and I just bought Final Cut Express. I created a simple movie in iMovie 09. I exported it as Final Cut XML. I imported the file in Final Cut Express. All as described in the Final Cut Express video tutorial.
However, I just get a "Media Offline" message... the import doesn't seem to work. I have tried this multiple times.
I have tried reconnecting the files, but it doesn't seem to let me select the right file...
Very confused... Is there anything I can do to get this working? (Preferably without having to attempt to reconnect the files)
Thanks!

Thanks Tom.
In the video tutorial it appears as if you do not need to reconnect the files. I assumed that this would only be necessary if the files had been moved, but I didn't move them. I thought that the XML files would include directions to where the video clips are stored. Do you have to manually point to the files every time that you import from iMovie?
My iMovie project is a screen recording. It consists of several .mov files. I have tried removing all the titles / fades / transitions but it still cannot see the video clips when I import them to FCE.
The movie's about 8 minutes long. It's in widescreen. I haven't changed any settings.

Importing from iMovie to FC Express

I have attepted to import AVCHD files from my Canon XA20 Camcorder to FC Express with no success. I then attepted to import the same files into iMovie with success.
I have 2 questions.
1. How can I import AVCHD files direct int FC Express.
2. To import from iMovie to FC Express I cannot find where iMovie video file are on the system. In FCE you can nominate a drive for the files to be put.

That is PAL 25 fps?
The data rate should be fine.
AVCHD is possible to ingest directly to FCE.
Make sure you set the comatching Easy Setup BEFORE trying to capture.
Use Log and transfer over USB cable.
Al

Importing from iMovie 06, lose capture dates

When I import old iMovie 06 movies, the capture dates gets lost. Here is one of the original clips in iMovie 06:
However, after importing in iMovie 11, the capture dates are lost. I tried many variations, like import the iMovie 06 project, or cd to the *.iMovieProject directory and import the actual clips, etc.
Now, good iMovie11 clips have the capture date imbedded in the file name (as in clip-2010-03-14 hh;mm;ss.dv). However, the ones imported from iMovie 06 end up in iMovie 11 with simple names such as clip55.dv. So it's not surprising I cannot see the capture dates in iMovie 11.
So I looked inside the *.iMovieProject directory hoping to find the capture dates either in the file name or in a plist, but I couldn't (nothing in the plists below)
... Jan 23 2010 Cache/Thumbnails.plist
... Jan 23 2010 Cache/Timeline Movie Data.plist
... Jan 23 2010 Cache/Timeline Movie.mov
... Nov 8 2009 Media/Clip55.dv
etc
Finally, I opened Clip55.dv in QuickTime and looked at MovieInspector, but I could not see any capture date (similar to exif in jpegs).
So obviously I missed them. My question is where in the iMovie 06 project can I find them? If accessible, I can write a script to fix the clips imported in iMovie11 by changing their names. I tried it manually, and it worked.
Thanks in advance

Hi - Couple of things.
Click on the offending clip that you imported from iMovie in your FCP Bin and type Command + 9 to see the item properties. Either report those item properties, or if easier, take a screen shot of the item properties and post that.
Then click any where on the timeline you are having trouble with and type Command + 0 (Zero) to see the sequence settings. Either report those settings or take a screen shot of the Sequence Settings window and post that.
In order for FCP to use the video without rendering, both the items properties of the source clip, and the sequence settings must match - and both must be within standard production parameters.
Also, you can click on the source clip in the FCP Bin, then control-click on the clip and select Reveal in Finder from the drop down menu. Once that file is revealed, open it in Quicktime 7 and see if if plays correctly there.
Hope this helps.
MtD

How can i import into imovie using the camera's built in memory?

How can I import into imovie from my cannon video camera built in memory. All that comes up when I connect the USB cable is what is stored on the memory card and it doesn't give me the option to use what is stored on the built in memory

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
With the new Photo app later this year the integration between IOS and the Mac will be much greater
LN

I am trying out Final Cut Pro X and trying desperately to import a project from iMovie 11 (version 9.0.9). There is no export to FCPX in iMovie 11 nor is there import from iMovie in FCPX.

Can someone please help me?
I am trying out Final Cut Pro X on a 30 day trial. So far so good.
I am now trying desperately to import a project from iMovie 11 (version 9.0.9) into FCPX.
I have read multiple posts on this subject and they all recommend File/import/ from iMovie project in FCPX
However there is NO such option under File/import in FCPX - nor is there an option to export to FCPX in iMovie 11
Can anyone please enlighten me.

The current version of FCPX does not work with that version of iMovie. You need version 10.0.3, which allows you to send a project to FCP.

Can't import from Cannon HV20.

I can't import from my Cannon HV20. The camera does not show up as an external camera. I just get the message "to import video, please connect a camera". I get the same message when connecting to my laptop and I have tried two different firewire cables. I have gone through the settings on the camera and I don't see anything that would prevent it. I have the camera in play mode and powered on. I have successfully imported from this camera many times. This started yesterday when I plugged the camera in while using ichat and ichat crashed. I suspect the firewire connection on the camera is damaged.
Any ideas?

I have the same problem with a different camera.
I have used my Sony TRV27 Handycam in making movies primarily with iMovie 6.0.3 on my former G5. It did record from the camera to iMovie 7.1.4 on my Intel core 2 but now can't get in to import to either program 6.0.3 or 7.1.4. It will not recognize that the camera is attached or switch the camera icon to camera mode. If it does it only shows Built in iSight or Time Lapses.
I prefer to use the older iMovie camera because of the options and familiarity of it. I do not care for the newer iMovie program format.
I went to the system profiler as suggested and found firewire but have no idea what the Firewire Device Tree looks like nor did I see anything on the right except Firewire Bus speed.
I have been using the cord from Sony in the past to import movies. My computer does not show the camera even though in Finder/Preferences connected services are checked to show up on the desk top.
I phoned Apple Care today and got virtually no help. The gentleman kept saying it was the camera that was at fault. Or it was the ? slot in the computer that wasn't working. They both work. I checked. I see by posts a lot of other camera owners are having similar problems.

What type of files can I import to iMovie?

I want to know what type of files can I import to iMovie. I recorded a video from a Windows PC, I want to edit it in iMovie but it's on .wmv so I ca't import it.
What type of file do I need so I can import it to iMovie
Thank you

h264 in a mp4 should be fine ...
(that's a very universal combo, should be avail on your Windows machine...)

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

No I haven't formatted it, but don't really know how to either? I am a bit of a newbie at this and thought i just had to buy any memory stick and it would work. can you suggest how to format it for FAT32 ( I don't know what this is either ) as I will be using the memory stick for windows also at a later date.
Thanks for your reply

Can't import from Sony XDCAM memory card to FCP 6

I can't import from Sony XDCAM memory card to FCP 6.01 HD. Am using Macbook Pro, 2 gig of RAM. This is my first time NOT using tape. I can copy the files off the memory card onto an external drive (to free up the card for pro crew's next day's shoot), but can't import either to FCP. Do I need to convert the files in some way before FCP can read them? Need to fix this problem fast as the crew are off to Nepal for 2 week shoot.

Laura,
First, I'm assuming that you're referring to the XDCAM EX. You'll need to install the FCP 6.0.2 upgrade, which contains the XDCAM EX codecs.
Second, You'll need to install the PDZK-P1 Transfer Application, and use that to import your EX clips into FCP. I just noticed that there is a new version available, 2.5.1 which is labeled specifically for Tiger/Leopard. I haven't tested this version yet, and will report back on any stability issues. We're currently running version 2.1.1, without many issues.

Can't import from LR 3 to PSE 10

Installed Photoshop Elements 10 and can't import from LR 3 for external editing. Any suggestions? I've already tried deleting the LR and PSE .plist files.

So basically I uninstalled Photoshop Elements 10 trial version. I uninstalled LR4 upgrade version. After reading about all the on line grief that people have been having with LR4, why go there? Sounds like more hype with a wopping side order of hooey. Did the online text conversation with Adobe support person prior to logging on to this forum and his only suggestion was call tech support Monday. Uninstalled and reinstalled LR 3.6. Uninstalled and reinstalled PS CS3. Everything works perfectly like it did before. Why or why did I waste all my time with supposedly compatible upgrades? First time I've really been disappointed with Adobe. Hope it's the last.

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

For future reference, if there is an error message, you should probably quote it in your original message on the subject.
"Could not be read" indicates that you do not have WRITE permission to the destination directory when you try to import, so change your permissions.
"not recognized" might indicate the camera card itself is corrupted or the card reader is failing ... or the problem might go away if you change your permissions.

Can't import from camcorder with iMove '08

I'm no longer able to import my movies from my Sony camcorder. I was able to do so in July so I'm assuming there's a problem with the latest software. The camcorder is connected via USB (it show its connected) but iMovie does not come up with the import prompt it used to, nor can I select from Import (it only shows the built-in camera). I have more then enough space, I've tried multiple USB cables, even disconnected everything else, re-booted, powered down the camcorder--everything. Please help, this is very frustrating!

You don't say which camcorder you're using.
Many Canon camcorders will NOT work properly with anything else, e.g; an external disc, on the FireWire circuit. Sorry. For those, you'd need to import to the internal disc and then copy to the external, and continue editing with the external drive.
"..Could it be my firewire drive is too slow to record the video?.." No: all modern external FW drives are perfectly fast enough, and a 320gb is certainly a modern drive.
"..formatted Mac OS extended (journaled).." ..are you absolutely CERTAIN..? ..It needs to be, otherwise it'll do just as you describe. And even discs bought for Macs or from Mac stores generally come formatted as "PC Exchange", i.e; MS-DOS formatted. Check it again by right-clicking or Ctrl-clicking it and use 'Get Info'. If it really says "Mac OS Extended" you're OK. If not, you'll need to use Applications>Utilities>Disk Utility, select the name of the disc and click the 'Erase' tab (after you've moved off the disc anything which you might want to keep) and then select 'Mac OS Extended'. CAUTION: be sure that you've selected the external drive: don't accidentally reformat and wipe your internal drive!
"..Are there any settings I can adjust or other things to try?.." No. However..
Some camcorders are not properly recognised by iMovie at first. It pays to open a project which already has some footage in it, play that and then attach the camcorder and try importing. Playing back some existing DV footage often - in my experience, anyway - 'kick starts' the program into accepting more footage from the attached device.
But that only works if (a) the drive DEFINITELY is formatted as Mac OS Extended, and (b) you're NOT using a Canon with an external disc..

How can I import from homemade DVD to iMovie ?

In converting VHS to DV in iMov I use the original 1988 camcorder for obvious tracking reasons. However, I have one tape that was left in the hot sun on my dashboard and, no surprise, is very flaky, but only in camcorder playback. This happened years ago and I had to transfer the (tape only) into a new cartridge. And since I was playing back from a newer VCR it did as well as could be expected. Then last year I put all my VHS tapes onto DVD thru a Panasonic HD/DVD recorder. Since my homemade DVD has no copy protection why can't I import into iMovie? My only other option is to copy from Panasonic to DV tape and then import to iMov and I worry about quality losses with only S video coupling. All my tapes went to HD and DVD in XP mode (1 hour per DVD).

Hi,
See this thread: QuickTimeKirk, "copying dvd to imovie project" #1, 08:53pm Oct 9, 2005 CDT
You'll need to convert the dvd back to a form iMovie can import, details are in that discussion. Hope that helps.
Vicki

Canon HV-40 and iMovie '09. CAN'T IMPORT FROM CAMERA!

Canon HV-40 (USB) and iMovie '09 8.0.3 (802) - (USB Based video editing software) NOT TALKING!!!!
Just bought the camera because my new MacBook does NOT have a FIREWIRE connection.
Now I have three cameras.
Two Firewire ones, and one USB.
Can't work either with iMovie '09, nor iMovie HD 6.0.3 (267.2).
Thank you for helping me...

To import from Tape based cameras, you need Firewire. If you can still return your MacBook, trade it in for the 13" MacBook Pro with Firewire that was announced last week.

Can't import from iMovie HD

Similar Messages

Maybe you are looking for