Can't import from SD Card

My i-Mac, running OSX 10.5.6 is no longer able to import photo files from my SD cards, into Aperture 2.1.2.
I have tried to import both using a USB connection between camera and computer, and by using a USM card reader.
Interestingly, there is no problem importing images from the same cards into I-Photo. This suggests to me that this is not a hardware problem, but is an Aperture problem.
Any ideas?

If you copied the entire contents (even blank folders) of your SD card, then iMovie should be able to read it.
Choose FILE/IMPORT FROM CAMERA ARCHIVE and navigate to the folder that contains the contents of your card.
Here is a sample of what you should see.

Similar Messages

IPhoto can't import from CF card

Hi,
today when trying to import some photos from my kids rugby game, iPhoto can't import several of them. In total there are 51 photos on the newly formatted CF card and 5 of them doesn't even have a thumbnail picture, and even more of them can get imported to iPhoto. I get a kind of nonsense error message telling me that iPhoto can't import a picture because it can't get recieved or something similar. If I use Image Capture I get 38 of them imported.
I really want to save these photos, what can I do?
And what has happened, is it the memory card that is bad? I sure must prevent this from occuring again in the future.
Thanks...
/Mans

Are you importing via a card reader or are you plugging the camera directly into the computer?
My suggestion is if you are using a card reader, you may want to go through the camera instead if you can to see if the camera is better able to hand off the photos to the Mac.
But it sounds more like a card issue if you have problems outside of iPhoto like when trying to use Image Capture.
Patrick

How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

Hi All,
Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options. The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
Thanks in advance,
Phil in San Diego

Phil,
PhilipCWells wrote:
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed. The link is:
http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
One of them should help you with this.
Jeff (in San Diego as well)

Can't import from Sony XDCAM memory card to FCP 6

I can't import from Sony XDCAM memory card to FCP 6.01 HD. Am using Macbook Pro, 2 gig of RAM. This is my first time NOT using tape. I can copy the files off the memory card onto an external drive (to free up the card for pro crew's next day's shoot), but can't import either to FCP. Do I need to convert the files in some way before FCP can read them? Need to fix this problem fast as the crew are off to Nepal for 2 week shoot.

Laura,
First, I'm assuming that you're referring to the XDCAM EX. You'll need to install the FCP 6.0.2 upgrade, which contains the XDCAM EX codecs.
Second, You'll need to install the PDZK-P1 Transfer Application, and use that to import your EX clips into FCP. I just noticed that there is a new version available, 2.5.1 which is labeled specifically for Tiger/Leopard. I haven't tested this version yet, and will report back on any stability issues. We're currently running version 2.1.1, without many issues.

Can't import from internal SD or external SD to Mac Photos app

I have been using Photos since it was released without any issues except that I can't seem to import from SD cards. Trying to import from either the internal SD slot on my Mac Mini or externally connected card readers fails.
When I choose file, import within Photos and navigate to the SD card source, the "review for import" dialog is grayed out, as are the folders themselves. If I manually navigate to the SD card outside of Photos, I can select the files and choose open with Photos and import like that without issues. My library is on an external drive, if that matters. Any ideas how I can fix this or why its happening?
thanks!

If there is no other way, drag the images to a folder on your desktop and import them from there.
Keep it simple

Import from SD card hanging

New laptop (toshiba qosimo w/20gb ram, ssd and hd), new os (windows 8), new version of lightroom (5.2) new bloatware (toshiba), new problems.
I can usually get one import from sd cards to work per boot in lightroom. when lightroom ejects and a new card is put in (I run several cameras per shoot) it shows the pix thumbnails, correctly identifies the new images and then just hangs on import. the import bar jumps to about 2/3 and stops, even running over night does nothing. At this point trying to use the windows explorer browser to access the sd card also hangs explorer. I can click the close "x" on the import status bar and it does eventually close though I must physically eject the card before the "Import Results" error dialog pops up. I can then re-mount the sd card and manually copy the files into thir dated folders, making new ones as needed, and sync the parent folder in lightroom and continue working but that is very tedious.
I've made sure all bloatware is not indexing, importing, or any other bad behavior. I have tried killing of all apps and background bloatware item by item with no success. Rebooting allows me one additional import but hangs on the second sd card.
While it criples lightroom I doubt it's lightroom's fault. Anyone have any ideas on how to troubleshoot? If it matters I'm using the built-in SDHC card reader which is a realtek pcie unit running the "RiconMan.exe" process. I've even tried killing that and letting it restart with no joy.
Thanks in advance,
Mark
UPDATE:
My third paragraph made me think it could be connected to the built-in reader so I searched around and eventually "borrowed" my wife's USB reader. I was able to do 2 imports on it after the 2nd import on the built in reader had failed. Looks like it's a conflict between realtek's reader and lightroom. I can copy files from several sd cards in explorer so this problem only seems to afflict lightroom.
Message was edited by: Mark4Cambodia

Photos > View > Show Sidebar
YOur card should be listed near the top of theSidebar. Select it and check the box above to Open Photos for this device.
You can also make Photos the default app in Image Capture.

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

For future reference, if there is an error message, you should probably quote it in your original message on the subject.
"Could not be read" indicates that you do not have WRITE permission to the destination directory when you try to import, so change your permissions.
"not recognized" might indicate the camera card itself is corrupted or the card reader is failing ... or the problem might go away if you change your permissions.

Confusion re: photostream, import from memory card, events, etc.

confusion re: photostream, import from memory card, events, etc.
Up until a few weeks ago, my travel-photo-handling went like this:
Each night, I download photos to my iPad for safekeeping. They, of course, wind up in Photostream.
When I return home, I connect my camera card to my iMac (where I have my iPhoto library), and I can "see" the photos on my memory card - the photos which, although in Photostream, I have not yet manually downloaded.
I select and ownload them.
New Events are created in my Library automatically, as I have my preference set to Autosplit Events.
This week, I came home from a trip during which I had downloaded to iPad during my time away.
I connected my memory card to the iMac.
iPhoto did not "see" any photos to import - as far as iPhoto was concerned, those photos were already in my Library.
I had iPhoto show all photos on my card, selected the photos from my trip (I shot over 1000) and clicked "Import Selected"
iPhoto says they're duplicates.
However, the photos have NOT been downloaded manually and there are NO Events in my Library for those days.
Note: yeah, they're in Photostream, but IN THE PAST - and I mean literally up until 3 weeks ago - the photos have ALWAYS been "visible" and importable even if in Photostream, as long as I had not yet manually downloaded to the computer.
So my question, I guess, is multi-part:
What changed in iPhoto and/or Photostream in the past couple of weeks?
Why are Photostream photos suddenly considered to be the same as the photos on my card which have not yet been manually downloaded to the computer?
What the heck is going on?
I hate having duplicates, but I also hate being confused by something that used to be really easy, then - with Photosream - became annoying, and is now simply perplexing and sometimes imcomprehendable.

Check iPhoto's Photo Stream preference pane to see if the highlighted checkbox in the screenshot below is checked. If it is then all photos taken by the iPad are automatifdally being imported into your library.
Go the the Events mode and check the View ➙ Sort menu option to verify where new Evens will be located, at the top of the window or the bottom. Then check to see if your PS pictures are there.
As a test launch iPhoto with the Option key held down and create a new, test library. Connect your iPad and import all photos. Dismount the iPad, close and reopen the test library, connect the iPad again and test to see if the same problem persists. Does it?
If it does'nt then your current library is damaged and needs to be repaired.
OT

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

No I haven't formatted it, but don't really know how to either? I am a bit of a newbie at this and thought i just had to buy any memory stick and it would work. can you suggest how to format it for FAT32 ( I don't know what this is either ) as I will be using the memory stick for windows also at a later date.
Thanks for your reply

Can't import from Cannon HV20.

I can't import from my Cannon HV20. The camera does not show up as an external camera. I just get the message "to import video, please connect a camera". I get the same message when connecting to my laptop and I have tried two different firewire cables. I have gone through the settings on the camera and I don't see anything that would prevent it. I have the camera in play mode and powered on. I have successfully imported from this camera many times. This started yesterday when I plugged the camera in while using ichat and ichat crashed. I suspect the firewire connection on the camera is damaged.
Any ideas?

I have the same problem with a different camera.
I have used my Sony TRV27 Handycam in making movies primarily with iMovie 6.0.3 on my former G5. It did record from the camera to iMovie 7.1.4 on my Intel core 2 but now can't get in to import to either program 6.0.3 or 7.1.4. It will not recognize that the camera is attached or switch the camera icon to camera mode. If it does it only shows Built in iSight or Time Lapses.
I prefer to use the older iMovie camera because of the options and familiarity of it. I do not care for the newer iMovie program format.
I went to the system profiler as suggested and found firewire but have no idea what the Firewire Device Tree looks like nor did I see anything on the right except Firewire Bus speed.
I have been using the cord from Sony in the past to import movies. My computer does not show the camera even though in Finder/Preferences connected services are checked to show up on the desk top.
I phoned Apple Care today and got virtually no help. The gentleman kept saying it was the camera that was at fault. Or it was the ? slot in the computer that wasn't working. They both work. I checked. I see by posts a lot of other camera owners are having similar problems.

Can't import from LR 3 to PSE 10

Installed Photoshop Elements 10 and can't import from LR 3 for external editing. Any suggestions? I've already tried deleting the LR and PSE .plist files.

So basically I uninstalled Photoshop Elements 10 trial version. I uninstalled LR4 upgrade version. After reading about all the on line grief that people have been having with LR4, why go there? Sounds like more hype with a wopping side order of hooey. Did the online text conversation with Adobe support person prior to logging on to this forum and his only suggestion was call tech support Monday. Uninstalled and reinstalled LR 3.6. Uninstalled and reinstalled PS CS3. Everything works perfectly like it did before. Why or why did I waste all my time with supposedly compatible upgrades? First time I've really been disappointed with Adobe. Hope it's the last.

Lightroom freezes during import from SD card

OSX 10.9.5
LR 5.4
Macbook Pro approximately 5 years old
This has happened all of the last three times I'm importing to Lightroom from an SD card that came out of my Nikon D7000. I'll get about 175 photos through an import from a shoot that day. Might have 800-1000 jpegs to import. At around 175 the whole process just hangs. I can still use other programs but LR is hanging. I have to end the task (successful) but quitting LR is impossible without a Force Quit. I've tried different SD cards, that's not the issue. Any thoughts?

Photos > View > Show Sidebar
YOur card should be listed near the top of theSidebar. Select it and check the box above to Open Photos for this device.
You can also make Photos the default app in Image Capture.

Can I import from Panasonic P-2 Videocamera?

I can't get I Movie 09 to import from my Panasonic AG-HPX170P that uses P-2 cards. Can you offer any help? Is it possible?
I Movie appears to see the camera in the "Import from" window, but cannot import it's video.
Thanks so much.

A CMX 3600 list from Premiere will import nicely into FCP...
I think Premiere can export a batch list too for your individual clips. Open this list in excel to change the column headers for import into FCP. They must match exactly (Name, Media start, media end, reel, is all you really need. I'd recapture from tape in FCP too, Premiere's DV files aren't optimized for FCP, however they will work...
Just did this very thing Monday.
Jerry

SQL modeler can not import from data dictionary

It was very frustruted to see that the SQL Modeler hang in import from data dictionary of a database as part of revise engineering. I have to question myself if sql modeler is a serious tool and should I give up.

I am not sure if Data Modeller is still in Beta./Production. First couple off initial versions of a new product are normally buggy.
Regards
Alternatively, If this product is still in Beta, then you can contact the development team or report the issue so that they can take care of this issue in next beta release.
Edited by: skvaish1 on Mar 30, 2010 3:18 PM
Edited by: skvaish1 on Mar 30, 2010 3:26 PM

Can't import from camcorder with iMove '08

I'm no longer able to import my movies from my Sony camcorder. I was able to do so in July so I'm assuming there's a problem with the latest software. The camcorder is connected via USB (it show its connected) but iMovie does not come up with the import prompt it used to, nor can I select from Import (it only shows the built-in camera). I have more then enough space, I've tried multiple USB cables, even disconnected everything else, re-booted, powered down the camcorder--everything. Please help, this is very frustrating!

You don't say which camcorder you're using.
Many Canon camcorders will NOT work properly with anything else, e.g; an external disc, on the FireWire circuit. Sorry. For those, you'd need to import to the internal disc and then copy to the external, and continue editing with the external drive.
"..Could it be my firewire drive is too slow to record the video?.." No: all modern external FW drives are perfectly fast enough, and a 320gb is certainly a modern drive.
"..formatted Mac OS extended (journaled).." ..are you absolutely CERTAIN..? ..It needs to be, otherwise it'll do just as you describe. And even discs bought for Macs or from Mac stores generally come formatted as "PC Exchange", i.e; MS-DOS formatted. Check it again by right-clicking or Ctrl-clicking it and use 'Get Info'. If it really says "Mac OS Extended" you're OK. If not, you'll need to use Applications>Utilities>Disk Utility, select the name of the disc and click the 'Erase' tab (after you've moved off the disc anything which you might want to keep) and then select 'Mac OS Extended'. CAUTION: be sure that you've selected the external drive: don't accidentally reformat and wipe your internal drive!
"..Are there any settings I can adjust or other things to try?.." No. However..
Some camcorders are not properly recognised by iMovie at first. It pays to open a project which already has some footage in it, play that and then attach the camcorder and try importing. Playing back some existing DV footage often - in my experience, anyway - 'kick starts' the program into accepting more footage from the attached device.
But that only works if (a) the drive DEFINITELY is formatted as Mac OS Extended, and (b) you're NOT using a Canon with an external disc..

Can't import from SD Card

Similar Messages

Maybe you are looking for