Can't import Inbox.dbx file

I am using Outlook Express 6 and would like to import my Inbox.dbx file.
Through Outlook Express, File/Import/Messages/Microsoft Outlook Express 6/Import Mail from an OE6 store directory/Brouse & select the "Mail" file with all the dbx. files, I am able to import all the files except the Inbox.dbx file.
The "source" Inbox.dbx shows it as having 10,737 KB.
When I move the "source" Inbox.dbx into it's own folder, and try to just import it, I get a:
"No messages can be found in this folder or another application is running that has the required files open. Please select another folder or try closing applications that may have files open." message.
Even doing a restart (soft boot) doesn't make any difference.

Hi,
Based on my research, this behavior can occur if the files that you try to import have the read-only attribute set. The read-only attribute can be set if you copy the .dbx files to a CD-ROM by using a CD-R or CD-RW device.
To resolve this issue, copy the files to a writable disk (for example, a floppy disk or hard disk), and remove the read-only attribute from the file's properties. You should then be able to import the files by using the Outlook Express import feature. You
can refer to this KB article:
http://support.microsoft.com/kb/252603
In addition, this forum is for general questions and feedback related to Outlook, Outlook Express is not supported here. If you need further assistance about Outlook Express, I'd recommend you post a question in the following forum:
http://answers.microsoft.com/en-us/windows/forum/windows_xp-ecoms?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1413510240654
Thank you for your understanding.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

How can I import an ibook file back into iBook Author?

I exported an ebook from iBook Author thinking it is the equivalent of saving the file.
I did not save the file, I only exported it and than exited the program.
My active file is vannished.
I need to make some adjustments to the ebook, but can not bring it back up.
Is there a way that I can re-import the iBook file back into iBook Author?
When I open iBook Author and try to open the exported file the program does not recognise the ibook file...
Thanks for your help!

Check for previous versions of that book in iBA....even if not saved.
You can dig into the .ibooks file by changing the suffix to zip, but you'll have to manually extract what you can from assets you find. Please only do this with your own books.

How can I import a .swf file in Adobe Flash CS4?

Hi,
How can I import a .swf file in Adobe Flash CS4?
Thanks.

you can use file/import but that would be a mistake.
you should "load" your swf, not import it.
if you want to load it and need help, are you using as2 or as3?

How can I import an AVCHD file to iMovie 11?

How can I import an AVCHD file to iMovie 11?

Support for eps was removed from Elements 11:
Supported file formats

How can I import iPhone Garageband Files to Mac Garageband?

How can I import iPhone Garageband Files to Mac Garageband? I've found lots of threads about this but no direct answers/how to.
Thanks

With the latest build of GarageBand on the device, move to the My Songs view, tap the Edit button at top right, select the shaking song you want to export, then tap the sharing arrow symbol at top left, tap iTunes, then GarageBand.
Connect the device to iTunes, select it in the left-hand column, then select the Apps tab. You should find the exported file in the File Sharing area of the GarageBand app and from there you can copy it to your computer, then open it with the GarageBand application.
tt2

Can't import .mxf video files in Premiere CS5

Hi all!
I've just installed Premiere CS5 and imported some .mxf files to a project. But premiere just recognizes the audio tracks, it don't recognizes the video one.. it's like it was a simple audio file.. and i can see the video outside premiere.. anyone knows why is this happening?
With cs4 i never had this problem.
Thanks in advance!
André Inácio

Assuming you're not using the trial version :
if you can't import XDCAM EX files using the Media Browser, which will only import what Premiere needs, then there is something wrong with your installation.
PPro CS5.02 woks with all flavors of XDCAM EX files including those from the 350/320 cameras.

Can't import MPEG-2 files in FCE HD

I can't import MPEG-2 files into Final Cut Express HD. Before I bought the software, I took an MPEG-2 file to the Apple store and they imported it just fine. This is why I decided to buy the software. I know it can work, I just don't know why it won't work on my Mac. Anyone have any ideas?

Well, I figured if I talked to myself long enough, I might figure it out. I did. I had to buy the QuickTime MPEG-2 Playback component in order to import these files into Final Cut Express HD. I have the video in FCE HD rendering. If there was another way, I'm waiting to hear.

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

Electronic Press Kit.
Usually in the form of video outtakes, movie trailers, cast and crew interviews. Basically, the stuff that gets bunged onto commercial DVDs as extras or ends up on late night TV "Making Of..." shows.
To answer the OP, you want a button on the menu that leads to a still image, or series of them, set up as a slide show. You can copy/paste the text in DVD Studio and then add formatting via the Text menu. (Highlight the text and right click to access formatting controls). Or do it in a graphics application using the appropriate video image preset.

Can't import my mp3 file on my computer at work

can't import my mp3 file on my computer at work but the same format will successfully import on my computer at home. Only difference is that work runs win 7 32 bit and home win7 64 bit.
can anyone help on this
regards,
Aron

iTunes seems to be quite fussy and may refuse to play/add MP3 files other palyers accept.
If you have the CDs you could try resaving them. Also some tag editors claim to have repair abilites. For example this one:
http://www.magnusbrading.com/mp3ts/
Or there is a repair tool here:
http://www.drtag.de/en/description_mp3rt.htm
I haven't tried these myself and it is always a good idea to work on copies of files if you are experimenting.

Can't import an xml file

Hi,
I am using Captivate 5.5 on Windows. I have an .swf file which needs to have an xml file with it in order for it to behave the way in which it was intended. The developer has said that the two files need to be included in the same folder.
I have no problem importing the swf file however I can't import the xml file which is called flashParams.xml. I have been editing the xml file in windows notepad and it is working perfectly outside Captivate. However when i try to import the xml, I get the message 'Cannot import XML'. I have been using File/Import/from xml to get the file loaded but no luck. I have also tried dragging it into the library but no luck here either.
Can anyone suggest what I might be doing wrong and how they would approach what surely must be a very simple task.
Thanks,
Nick

Hi Rod,
Thanks for the reply.
I think what I could do is to launch the swf by clicking on a link in the Captivate session to an external url (it will be hosted on Moodle). The one problem I have is that when I do this in Captivate, the slide refuses to pause and moves onto the next slide. What I would like is for the user to be able to click on the link for the url and for the slide to pause until the user clicks on a next button to go to the next slide.
Nick

Can InDesign import a CAPS file?

I work for a phonebook company, and they keep their data in an antiquated program that only supports Quark. The program can export data for page layout as a .DTG file that they give us a proprietary Quark extension for, so that the tags are read and formatting is applied as the text comes in. But their program can also export something called a CAPS file, which seems to be a simple text file with characters in front of the data to call up style sheets. There is a number and then a tag that corresponds with our UDACs. (UDACs are the names for the different categories of directory listings.) Does InDesign have a filter for importing a CAPS file, that can read these simple tags and apply formatting? Or, is there perhaps a third-party application that would do this? I would like to kiss Quark goodbye.
Thanks.

I've never heard of CAPS, but Indesign can certainly import a text file.
And if the text is coded, you can then search and replace the codes with
styles or formatting. If the routine is the same every time, it could be
scripted. Or you could just save your Find/Changes. Or you could bring
your DTG file into Quark, save as Quark 4, and then open the Quark file
in Indesign.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

I can't Import video&Audio file in photoshop cs6

I can't Import video&Audio file in photoshop cs6
And mytimeline is like Cs5

NO!~ is CS6 i'm very sure

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

Can't import uncompressed AVI files in CS6 Premiere Pro

Hi!
I'm using Adobe CS6 Premiere Pro on Windows 7 Pro (64bit) but can't import uncompressed AVI files.
I get the error that the file has no valid fomat or is damaged, but I can watch the avi videos without a
problem with the media player.
I also have CS4 installed, with CS4 I can import this files.
What can I do to solve this?

AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

Can't import Inbox.dbx file

Similar Messages

Maybe you are looking for