Can't import JPGs created in Photoshop Elements

I get an error upon importing. Any ideas? I use Photoshop Elements 2.0

Philippe, for future reference...
--First thing to know and remember is this...Do not drag any images, folder of images into the iPhoto Library in the Finder. Images have to be imported into iPhoto within the application. Do not scan images and save them into the iPhoto Library folder in the Finder. Save them to another location such as the Pictures folder or even the desktop. You can then import them into iPhoto.
--You have a folder of images on your hard drive and want to import them into iPhoto. Drag the folder of images into an open iPhoto Library window and the folder of photos will be copied into the library, resulting in a new roll with the name of the folder. You now have two copies of those photos, the ones in iPhoto's database and the ones on your desktop. You can keep the ones on your desktop that you just imported as backup or you can delete that folder.
-- you scan a picture/pictures and save it in a folder. You cannot scan directly into iPhoto or the iPhoto Library folder in the Finder.
You want all your photos in iPhoto so you import them into iPhoto.
Now you have two copies of that picture/pictures, so you can delete the originals that were in the scanned folder and keep the one/ones that were imported into iPhoto.
-- You download pictures from your camera into iPhoto.
There is now one copy of each of the pictures.
You want to change something about a picture you imported, such as
cropping it or changing the size, or changing the orientation.
Once you do that to a picture, you now have two copies of the picture
in iPhoto, the original and the edited one. The edited one will be in the library organize view. The original is packed away in an Original folder in your iPhoto Library folder under the date of the roll. You can always revert to the original by control clicking on the photo and choose "revert to orginal" You will not have this choice if you used iPhoto Diet to get rid of the Originals.
(a quick note on cropping within iPhoto...when you are in edit mode, you automatically will be in the crop mode with cross hairs to highlight the crop area. To finish cropping you must click the crop button and then go back to library view and your cropped picture will be there.
3.You want to use Photoshop or another graphic program to edit a picture in your iPhoto library.
You can open up prefs for iPhoto and choose "when double clicking on
photo ..do" choose "other" and select Photoshop. Now you can edit all
pictures in your iPhoto library in PhotoShop by double clicking. If you save the photo with the same name and as a flattened file it will be saved right into iPhoto and you will see the changes. If you don't want to save it into iPhoto then do a "save as" and save to the desktop. You will then have the original photo still in iPhoto and your new edited photo on the desktop.
Or, with iPhoto open, you can drag a picture from the library window
to your desktop (you see a + sign on the pic you are dragging). You now
have two of the same picture, one in the iPhoto library and one on your desktop. You can open up the one on your desktop in any graphic program and work on it. The one in iPhoto stays the same. You can also share/export the picture/pictures to your desktop or folder to work on them or do batch processing, etc. You will still have the originals in your iPhoto Library.
Or, you can open up the ~/Pictures/iPhoto Library/folders and option drag any
picture out of the folder to your desktop. Notice that you will see a plus sign while dragging the photo. This is copying the file to your desktop
I would advise anyone not to do this as they might forget to use the option key and drag the photo out. Next time you open iPhoto the photo will be missing.
Two Apple kbs for you to read
Don't tamper with files in the iPhoto library folder
<a href

Similar Messages

  • Can I import a catalogue from Photoshop Elements to Photoshop CS5

    I have 5000 photos organised in catalogues in my old Elements and have just upgraded to Photoshop CS5 Extended edition running under Windows 7 64 bit.  Is it possible to import my existing catalogues into CS5 or do I need to recreate them all again?

    Probably not... most DVR makers code to the hard drive in a proprietary format that will not work in any other DVR
    You may be able to PLAY the video out to an external recording device, such as a VCR or a DVD recorder
    Or, for a computer, you may be able to use a converter such as at http://www.grassvalley.com/products/converters

  • I can not import video frames in photoshop elements 12

    Hello,
    I want to import video frames (for making an animated gif). The instructions how to do this in elements is clear (Go to File, choose Import, choose video frames), but I don't see that last option in the menu... See screenshot.
    (I tried to import video via Organizer but that is not possible either)
    So what to do?
    Thanks for any help.
    Robert

    Frame from video was removed because it was just too old and not useful for what video is like today. It was designed to grab a frame from those short tiny videos that early digital cameras made, you know the ones that could record about 30 seconds of video at 300 x 400. It was never any good at longer videos and couldn't do HD at all, so adobe removed it because it was becoming more of a problem than a solution. It is not in any language version of PSE 12.

  • Can't import CR2 images into PHotoshop Elements 9

    Please could someone help me with importing CR images from my Canon S120 camera...it just says doesn't recognise file type?

    You need camera raw 8.3 for your camera. It is only compatible with PSE12 or PSE13. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.3
    Mac download (.dmg file) click here DNG Converter 8.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Are .mov files usable in PE 13?  If not, can PE 13 convert them to a usable format?  Will the result be usable in a slide show created with Photoshop Elements 13?

    Are .mov files usable in PE 13?  If not, can PE 13 convert them to a usable format?  Will the result be usable in a slide show created with Photoshop Elements 13?

    jayarl
    Please do not duplicate thread. It gets confusing for you as well as for those trying to respond to your question.
    I have replied to your question in your other thread.
    https://forums.adobe.com/thread/1662961
    Please continue the discussions there.
    A moderator will probably delete or close one of the duplicates as soon as seen.
    Just a note...Photoshop Elements 13 and Premiere Elements 13 are standalone products. Each comes with the
    Elements Organizer 13. When both are on the same computer, they share the same Elements Organizer 13.
    ATR

  • ¿Dear Sirs, I can create with "Photoshop Elements 12", a PDF file of several pages?. I can create a "pdf" file, but not of several pages. Thank you

    ¿Dear Sirs,
    I can create with "Photoshop Elements 12", a PDF file of several pages?.
    I can create a "pdf" file, but not of several pages.
    Thank you
    Valentín Uriarte

    This is the Photoshop Elements forum.
    If you are using Acrobat, ask Here:
    Acrobat

  • Can a slide show be created  in photoshop elements 11 that can be viewed on an ipod?

    can a slide show be created  in photoshop elements 11 that can be viewed on an ipod?

    You can create a sideshow in PSE but I don't know anything about ipod so can't tell you whether it can be viewed in it.
    Just for interest sake, what does an ipod do?  I thought it was mainly for the music and speech based stuff but you seems to suggest otherwise.
    For an old tutorial of creating  SIDESHOW SEE THIS VIDEO:
    <http://tv.adobe.com/watch/learn-photoshop-elements-9/creating-a-slide-show-windows/>
    Good luck.

  • How to Import one slideshow from Photoshop Elements 5 into 8?

    Hi!
    Please advise on how to import one slideshow created in Photoshop Elements 5 in to Photoshop Elements 8.
    The customer is trying to do the same, but all he is getting is text captions, not the images.
    I tried doing the same on my station, but could not re-create the problem.
    Please advise. Any link would be highly appreciable.
    Thanks...

    Hi! Thanx for your response.
    It is not clear that he has imported it as wmv or pdf, but the slideshow has to be imported in such a manner that it can still be edited (Captions, effects etc.)
    Creating a wmv or pdf will not allow the same.
    Any Ideas?

  • How can I make a mural in photoshop elements 6?

    How can I make a mural in photoshop elements 6?

    You can have options of creating greeting cards, photobook, photo collage rather than having an option of mural. You can use different templates layouts of the application to create a mural like creation.
    Thanks.

  • How can I remove an object using Photoshop Elements 7?

    How can I remove an object using Photoshop Elements 7?

    You could probably use the 8 point garbage matte in this situation. I personally think the 8-point garbage matte is a bit cumbersome, but it should get the job done.
    1. Use the Razor Blade tool to place a cut before and after the shot with the bottle.
    2. Select the bottle clip.
    3. Press and hold Shift + Option, then drag the bottle clip up one track. This should create a duplicate clip directly above your original clip. (I'll refer to this duplicated clip as bottle2.)
    4. Locate the 8-point Garbage Matte filter and apply it to bottle2.
    5. Locate the Gaussian Blur filter and apply it to bottle2.
    6. Control click bottle1, and uncheck the "Clip Enable" setting from the shortcut menu. This will disable that clip.
    7. Double click bottle2 to load it into the Viewer. Then select the Filter tab.
    8. For the Garbage Matte filter, you'll notice 8 rows of numbers, these are the current locations for the control points, which you should be able to see in the Canvas. Start with point #1, and click the "+" button in the filters area, then in the Canvas click and drag to move the point. When you release the mouse button, you'll need to reclick the "+" button in the filters tab. Repeat these steps until you've isolated the bottle.
    9. Feather the edge of the matte.
    10. Adjust the Blur amount.
    11. Reenable bottle1. Playback the clip and make any necessary adjustments.
    Depending on your experience with Motion, you might also want to try sending bottle1 to Motion, then use Motion to control the layering.

  • Importing ACDSee database into Photoshop Elements 12?

    I use ACDSee Pro for my 15,000+ collection. In ACDSEE, all photos include captions and tags. Would like to switch to Photoshop Elements 12 but must take ACDSee's database with me, it took 5 years to build it!
    When I catalog a directory into Elements 12, captions and tags are not copied over, even though such data is 'embedded' (an ACDSee phrase).
    How can I import my ACDsee database into Elements 12??
    Would very much appreciate any help and great ideas.
    Ben Marselis

    Have you tried writing the ACDSEE metadata into the image files and see what they then look like in PSE?
    http://files.acdsystems.com/english/support/acdseepro/4/help/Content/1Topics/3_Manage_mode /Organizing/IDDH_SET_EXIF.htm
    Adding  Metadata to files and using Presets
    You can add information to your images using IPTC and ACDSee Metadata. IPTC information is automatically embedded into your image, while ACDSee Metadata can be embedded into your file, or stored in the database. You can add this information to one or multiple files at a time. You can also save frequently used metadata values as a preset, allowing you to quickly input this information without having to rewrite it.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • I want to upgrade from Photoshop Elements 5 to Lightroom 5.  Can Lightroom 5 read/convert a Photoshop Elements 5 catalog, or is Elements 5 too old to read?

    I want to upgrade from Photoshop Elements 5 to Lightroom 5.  Can Lightroom 5 read/convert a Photoshop Elements 5 catalog including all of the tags, captions, etc, or is Elements 5 too old for Lightroom 5 to read/convert?  What's the best way to migrate?  (My catalog has over 100k images in it.)

    Adobe changed the catalog software from PSE6 onwards to the SQLite database – as used in Lightroom.
    Earlier versions of PSE including PSE5 used a Microsoft Access database, stored in a file called [Catalog Name].psa.
    If you have already embedded keywords and captions by writing file info into the images they should be readable even if catalog conversion fails. Lightroom does have the ability to import a PSE catalog but in view of the age of PSE5 I would recommend downloading the 30 day free trial of LR5.6 and then you can judge the level of success of catalog conversion.
    http://www.adobe.com/products/photoshop-lightroom.html

  • Can't add jpg files to Premier Elements 9 timeline

    When I try to add jpg files to Premiere Elements 9 timeline, I get an error saying "This file is not supported, or the required codec is not installed". Windows 7 can open/display every one of the jpg files.  Photoshop Elements can open them as well.  I appreciate any help.

    Hi Steve,
    I tried to send you an e-mail ,but, your box was advised as"full". I can understand why somehow you closed the Forum on "Very disappointed with Premiere Elements". I would like to thank you for the advice you have indirectly given me on other technical matters. I cannot understand why Adobe do not allow their own Technicians to have an input to these Forums. I continue to be disappointed to Adobe Technical Phone and internet support in the Oceania Region .
    Regards

  • Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

    Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
    If so how do I accomplish this act?
    Are their additional menus available for Encore CS4?

    The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
    As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
    Good luck,
    Hunt
    PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

  • I can not open the Editor in Photoshop Element 12

    Hallo and sorry for my bad english!
    I can not open the editor in Photoshop Elements 12.
    After clicking the stands ".... only the workspace is loaded", but nothing happens.
    After installation in May, he has about a month and suddenly no longer works.
    What can I do?

    Version CS3
    Adobe DNG Converter and Camera Raw 4.6 update
    6.2MB
    10/10/2008
    Camera Raw 4.6 update
    3.5MB
    10/10/2008
    Camera Raw 4.5 update
    3.5MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.5 update
    6.1MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.4.1 update
    5.4MB
    4/10/2008
    Camera Raw 4.4.1 update
    3.3MB
    4/10/2008
    Camera Raw 4.3.1 update
    3.3MB
    11/15/2007
    Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
    72.8MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.3.1 update
    6.1MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.2 update
    5.9MB
    9/13/2007
    Camera Raw 4.2 update
    3.2MB
    9/13/2007
    Camera Raw 4.1 update
    3.2MB
    5/30/2007
    Adobe DNG Converter and Camera Raw 4.1 update

Maybe you are looking for

  • [SOLVED] How to add modules to build with the kernel?

    Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed. svart_alg% sudo mkinitcpio -k 3.15

  • What is the system status for a transaction ?

    Hi All, I want to know what is the exact meaning (usage) of system status ? We can create a user status in status profile and attach it to transaction type, then why do we use system status ? Regards, Ashish

  • Change Document Objects

    Hi All,      I am new to this topic      While created Object for couple of Customization tables (Header & details table) from Tcode SCDO, I can get INCLUDS & Function Modul. My doubt is, Is it necessary to use the INCLUDE in my report, If yes, How c

  • How to adjust power output of time capsule

    I was told that the power output of the time capsule is adjustable and that Apple does not ship the units at full power. Is this correct?

  • Creating new process through java

    Hello, I wanna create a new "process" through java and wanna do interprocess communication.