Can't import library

I followed the instructions for transfering a library
from Windows to a Mac and so far it's gone fine. Now
I'm trying to get the songs to show up in iTunes with
no success. I dragged the library from the iPod to
the music folder under documents, on the mac. It's
still not showing up in iTunes. I tried importing
these songs from that location and it brings up the
error message: "The file "Itunes Library.itl" cannot
be imported because it does not appear to be a valid
exported file" Any help would be greatly, greatly
appreciated. If you need any clarity because I know
it's jumbled, just let me know.
MacBook
I tried the suggestions of other users to import from an external drive with the same result as you. I resolved this by instead selecting add to library and then browsing to the itunes folder on the external drive. It then copied all the contents to iTunes on the Mac.

Similar Messages

Can I import library from one account to another account?

I have a work account and a personal account and I'd love access to my photos, music, etc, in my personal library. Can I import or sync the libraries? Thanks, Steve

let's try this again...
account = library...
I have 2 libraries, one under username "A" (personal) and one under username "B" (work).
it doesn't matter if they're work or personal, they were just names to refer to different accounts.
I have a library...the library is on a PC. I synced with an iPad. I'm syncing with a new PC ("B" or "work") and would like the import the library from the first PC but created with a different Apple account/ID ("personal" or "work").
I hope this helps explain my question.

Can't import Library List ;_;

I exported a playlist of my music about a week ago to my exterior harddrive, where I also store my music. Two days ago I had to reinstall Windows Xp and lost all of my data. Since everything was on my exterior harddrive I still have everything and I have reinstalled Itunes successfully but I can't import my music. I get all of my playlists, but with no music attached. I can add music back into these playlists, but I lost all of my stars ratings!
The error message tells me "Some of the songs in the file "Library.xml" were not imported because they could not be found".
I think the Letter next to my exterior harddrive in "My computer" has changed...but I'm not sure if that's whats causing this.

+I think the Letter next to my exterior harddrive in "My computer" has changed...but I'm not sure if that's whats causing this.+
that is EXACTLY the problem. You can use these microsoft directiosn to change the drive letter back to what it was before.
http://support.microsoft.com/kb/307844

Can't import library from another computer

I used to be able to sync my aperture libraries from my iMac to my MacBook Pro. I just would use the import Library/Project option and it worked perfectly. Now Aperture just hangs when I try to do it and I can't get it to work.
Does anyone have any ideas?

On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer

Can't import library from External drive to new compueter.

I guess this could be more of a Windows 8 issue but maybe someone knows what I can do. My old 2006 Macbook died and I just got a new Windows 8 laptop. I had my iTunes library on an external drive (formatted in NTFS) because the Macbook had a tiny hard drive. Anyway, this new laptop has big enough HD that I can copy my library directly to it. The problem is, I can't... I opened up two Windows Explorers, one with my old library, and another with the location of the new library. It should let me just copy the contents from one folder to the other but for some reason it just won't. I select all the files/folders, drag them over to the new location, and nothing happens. I tried to copy/paste, both with the right-click menu, as well as keyboard shortcuts, and again nothing. Not even an error message. Why won't Windows let me copy the files? Should I just open up iTunes and drag the files over that way or will that screw things up? Please help!
PS. I'm using Windows 8 64-bit and iTunes 11.1.1.11

Benhermies wrote:
I guess this could be more of a Windows 8 issue but maybe someone knows what I can do. My old 2006 Macbook died and I just got a new Windows 8 laptop. I had my iTunes library on an external drive (formatted in NTFS)\
If this was used with your MacBook, Macs cannot write to NTFS drives.
So what was on the external drive? WHat do you mean by "library"? Which folders?
Copy the entire /iTunes/ folder.
Why won't Windows let me copy the files?
Dunno.
It's not an iTunes issue.

Can't import library from iPod to iTunes

I was having troubles with my laptop so I was forced to re-load the entire operating system, deleting everything previously on my computer. Now, I'm unable to load all of my songs from my iPod into my new iTunes library. The only ones it is allowing me to import are songs that were purchased through the iTunes store. This is a pain because now I'm unable to listen to music on my computer. Can anyone help?

Go get some 3rd-party software like Yamipod, Copypod, etc.
Just google "iPod restore"
As you've found out, iTunes will only restore purchased music.
I can't recommend any certain program, since I haven't had to do this.

Aperture 3.1 won't Import Library over Local Area Network

I have upgraded three Macs on an ethernet LAN. One is the "master" and I periodically Import its Library to the other machines to bring them up to date. This has worked fine since v. 3.0 came out.
With 3.1 I can't Import Library over the LAN. On the target computer I navigate to the "master" computer, select its library, hit go, and Aperture on the target machine does nothing for a few seconds and then hangs with a spinning beachball. I have to force quit.
I have made small test libraries on each machine and confirmed that I can't Import to any machine from any other over the ethernet. But I can use the Finder to drag a Library from one machine to another's desktop over the LAN--and then Import Library from the desktop works fine.
I've done all the usual: repair permissions, database, and eventually restore from Vault. I've reinstalled v. 3.0. Get Info informs me that all the libraries are 3.1. As far as I can see, nothing else is broken. LAN networking works fine for everything but Aperture.
Does anyone else see the same problem? Any suggestions?

Me too. Upgraded both libraries to 3.1, rebuilt both libraries to see if that would help ... but no ... no way I can get one to merge with the other over Wi-Fi. Used to work fine in 3.0. I suppose I will have to try with a FW cable and the MacBook Pro in Target Mode - hopefully that will work in the short-term.

Can't import an iPhoto library into Aperture

I'm using Aperture 1.5.2 and iPhoto 6.0.6 and cannot get Aperture to import my iPhoto library. I am following the procedure in the Aperture User Manual (p. 112) but it doesn't work. I don't get a beach-ball cursor or anything... no images, no disk activity, etc. This is regardless of the “Store Files:” or “Version Names:” or other settings in the dialog box.
I saw the Apple Support doc entitled “Aperture can't import iPhoto Library from iPhoto 6.0.1 or 6.0.2” which promises a fix in Aperture 1.1. Is this still the same problem? Or is it a different problem?
I know I can drag the photos from iPhoto into Aperture, but keywords are not preserved. Any suggestions?
PowerBook Al 15 Mac OS X (10.4.9)

I recently started using Aperture 1.5.2 and imported my iPhoto Library from iPhoto 6.0.6, so it's not an impossible task. I also had a lot of trouble with it. I can say it was a pain and there were several false starts and once it froze half-way through importing them. I did File -> Import... -> iPhoto Library and I left the files in their current location... but you said this was regardless of settings. I swear the thing just sat their for a good 20 minutes after I told it to import, although I can't recall if there was a spinning cursor or not. I'd get occasional errors about being unable to connect to server at the beginning (after it sat there for 20 minutes) and middle of the process. I just kept hitting Okay and if I had all other applications closed, Aperature finally did it. So... I guess that all amounts to: "I had problems, too, but after several tries it worked so maybe just keep trying and let it sit for awhile if no one else has a more helpful suggestion." Good luck!

Can't import songs from Home Share library

Hello,
According to "Tunes Mac 9.0 Help - Sharing your iTunes library across computers," I should be able...
"- To import items from another computer, select the computer (below Shared), and drag items from its library to yours.
- To automatically import iTunes Store items that are downloaded to a computer you’re Home Sharing with, select “Automatically import new purchases from [Computer Name].”
However, despite the fact that I performed all the right steps, and both computers see each other shared libraries, I can not drag items from one library to another, nor can I find where to select "Automatically import new purchases..."
The second computer is a Windows 7, hopefully this is not the problem.
Help! Massive searches did not bring more info.
Thanks,
-Dima

I just noticed this problem for the first time today. I've never had trouble dragging and dropping items from my home shared libraries. Today - no way. For context, when I first accessed the shared library (on my PC) today from my Mac, there was the usual, togglable (entire library or just those not already on the importing computer) "import library" button at the bottom of the pane. But after I toggled to "not on my computer" (or whatever the option is called) and dragged a few new ones to the my Mac, I got a message saying "no can do, home sharing needs to be activated." This apparently was a casualty of a hard drive restoration yesterday, so I reactivated home sharing, and that's when the current problem reared its ugly head, both on my Mac and on my PC.

HT1567 I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

How can I import my library to a new computer?

Hi:
I just bought a new computer, and I'm trying to import my library from my old computer to the new one. I've transferred my 'My Music' folder (along with the iTunes folder inside it) onto the new computer using an external hard-drive, and I've reinstalled iTunes, but when I import the XML file (which I manually backed up from my old computer), I only get 400 songs of my 6,000 (I think these are the songs from 'My Music / iTunes').
I've tried clearing my library and just adding 'My Music' folder, and although this gets all my songs into the library, it puts the full file name under song name (my files don't have any tags on them), and it leaves the artist field blank. Basically, I'd have to go through all my songs and re-do the sorting fields.
I think the problem is that on my old computer, the pathway to 'My Music' was different from the pathway to 'My Music' on my new computer. Does anyone know how I can get my library to look exactly the same as it did on my old computer? As I've said, I have all the files in place, and I have the XML file ready to go. I think I just need to figure out how to get iTunes to find the songs in 'My Music'.
Thanks!
J

It's a brand new computer, so there wasn't an iTunes folder in the music folder. I just copied it there from my external hard-drive. I think the problem is that on my old computer the pathway to my songs was: C/documents and settings/Ken/my documents/my music, and on my new computer the pathway is C/documents and settings/dell 720/my documents/my music. I have the songs in the right folder, and I have the iTunes folder inside the folder as well, but iTunes is only finding the iTunes folder ... it isn't finding the songs in the 'My Music' folder. I don't know what to do about this. If I clear my library and start from scratch using 'add folder to library', I'll have to re-enter all my info fields, which isn't a pleasant thought.

How can I import an m4v movie from my desktop to my event Library in iMovie?

How can I import an m4v movie from my desktop to my event Library in iMovie? I want to include the m4v movie into another project in iMovie.

When you import DV Stream from tape, iMovie 11 will assume that you are importing raw footage from a camera, rather than a finished movie. It will create a new clip everytime it detects a scene break (the record start/stop button was pressed). These clips will be placed in chronolgical order - not the order they were on the tape.
One way around this is to import the tape into the application that you used to create it. For example, if you used iMovie 6, import the tape back into imovie 6. In iMovie 6, you can export the tape back out using FILE/EXPORT USING QUICKTIME. Choose the DV codec in an MOV container. You can then import this MOV file into iMovie 11 and have everything in the proper order for your finished movie.
Another option is to use FInal Cut Pro X.

HT1495 My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to d

My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to do this?

You are more likely to get relavant and useful suggestions posting to the Mac forums instead of the iTunes for Windows forum where you've posted.

How to upgrade a Library on an external drive created in a previous version of aperture so I can re-import it from the external drive into Aperture 3.5.1 on my MBP ?

I have exported earlier Projects [which were created in Aperture 3.4.5] to an external hard drive. Now I wish to reimport them into Aperture 3.5.1 - which I use after having upgraded to Mavericks - but am given an error message saying I can’t reimport because the external drive is storing a Library created by an earlier version of Aperture than I’m using now. It tells me to upgrade that externally stored Library.
The Question - one can only upgrade a Library on one’s computer, not on the external drive. How can I upgrade it if I can’t get it back into Aperture [3.5.1] on my MacBookPro in the first place ?
Thank you
Bob

The Question - one can only upgrade a Library on one’s computer, not on the external drive. How can I upgrade it if I can’t get it back into Aperture [3.5.1] on my MacBookPro in the first place ?
You can upgrade the library on the external drive. Connect your external drive to your computer.
Then select the library with the exported projects on the external drive and double-click it to open it in Aperture. This will upgrade the library to Aperture 3.5.1. Since upgrading can sometimes be problematic, I recommend to make a backup copy of the library before you try to upgrade the library.
After that you should be able to merge the library into your main library using File > Import.

Can't import library

Similar Messages

Maybe you are looking for