Can't Import _MG files into Lightroom

Im running Lightroom 2 and normally import images from my MkII without problems, with the IMG file extension. I used a friends 70D and am trying to import _MG files but the files won't import. Can anyone help as I need the images from this card and need to be able to work on them. I tried importing using a custom filename   sequence number but this didn't work either. Thanks!

"Mk II"? 1D Mk II? 1Ds Mk II? 5d Mk II?
Anyway, the 70D wasn't supported by Lightroom until version 5.2. Old (obsolete) versions of Lr cannot be expected to understand what to do with files from cameras five years newer than the software.
Either update Lightroom or convert the files to DNG with the Adobe DNG Converter - Lr 2 will read them.
Updating is far and away the best option, if you care about the quality of results: Lr 5 is in another league, image quality wise, to Lr 2. 

Similar Messages

  • I can't import raw files into lightroom

    I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

    I don't use nikon software.  I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
    Sent from Yahoo Mail on Android
    From:"dj_paige" <[email protected]>
    Date:Thu, Apr 23, 2015 at 10:22 AM
    Subject:[Photoshop Lightroom] I can't import raw files into lightroom
    I can't import raw files into lightroom
    created by dj_paige in Photoshop Lightroom - View the full discussion
    Do you have Lightroom 5.3 or higher?
    Did you use Nikon software at any point on these photos?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can I import RW2 files into Lightroom 4?Also why can`t I see jpgs related to the same RW2 files?

    I tried ti import my RW2 camera (Lumix) raw files into Lightroom 4.4 and simply couldn`t do it. Also I had jpgs in the same folder and Lightroom didn`t bring them in at all.
    What can I do? Is there any ways or settings? Does Lightroom 5 see RW2?
    Thanks

    What Jim said.
    Either:
    Upgrade to Lightroom 5 then open the RW2 files in LR5, or
    Download the free Adobe DNG converter, convert all RW2 files to DNGs then edit the DNGs in Lightroom 4
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • Problems importing raw files into Lightroom 3.4

    I've just dowloaded lightroom 3.4 and now I'm having problems importing raw files into lightroom.  I havent had a problem before.  Can anyone help me?  My camera is a Nikon D7000.

    Perhaps a few more details are required. Take a look at the FAQ "How to get help quickly"

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Can't import any images into lightroom 5

    Working away in my studio and suddenly I can't import any images into lightroom 5 (version5.5) for macbook pro os x 10.9.5

    Thank you for your response,
    ...my complete goofiness.
    I somehow managed to change my destination folder in Lightroom when importing images and could not copy to the "location" (or as the right panel indicates, the "destination").
    So adjusted my destination folder and am back to importing as usual.
    _Cindy

  • Can I import html files into Buzzword?

    Can I import html files into Buzzword?

    Thank you for your post.
    Buzzword lets you import Microsoft Word (DOC, DOCX), plain text (TXT), Rich Text Format (RTF), Word 2003 XML, and Open Document Format (.odt) files. (Font substitution and other formatting changes sometimes occur on import, depending on the content of the document.) You'll need to convert your HTML file to one of the supported file types before importing to Buzzword.
    Kind Regards,
    Michelle

  • Can't import prores files into Premiere Pro CC or SpeedGrade CC

    Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
    I also can't export to DNxHD files to an MXF file either.
    I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
    Conflict?

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

  • Can you import Dreamweaver files into Muse, how?

    Can you import Dreamweaver files into Muse, how?

    If the images aren't showing up in DW, why do you think they will show in Muse?  Obviously, something is wrong with the paths to those images.  And that will most likely be due to the underlying code.
    Can you post an example of a problem page?
    Nancy O.

  • Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Urgent please
    anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Sounds like the folder Write permissions issue described here with a solution:
    "Some import operations were not performed" from camera import

  • Can't load Raw files into Lightroom 3 form my Nikon D7100

    Can't load Raw files into Lightroom 3 form my Nikon D7100... Why?

    TGTruman wrote:
    How do I convert the Nef to DNG files...
    Download the Adobe DNG Converter (and install it, and run it...).
    Note: an internet search will reveal a link in short order.
    TGTruman wrote:
    I don't mind going to LR5, just don't want to spend the money and then not have it work...
    So use the trial first. No?
    R

  • Can you import PDF files into iBooks Author

    Can you import PDF files into iBooks Author ?

    wozwoz wrote:
    If Apple want to have
    You can tell them your views on that via
    http://www.apple.com/feedback

  • Can i import .sql file into oracle apex?

    i'm new to oracle apex....
    Can i import .sql file into oracle apex?
    i've to import a table into apex...
    what script i have to write into the .sql file....
    pls help...
    Edited by: 794244 on Jan 31, 2011 9:31 PM

    Hi Mahesh
    Navigate to the APEX documentation page - all the documents are listed there ;) (including direct links to the step-by-step "how-to's" - great stuff)
    http://www.oracle.com/technetwork/developer-tools/apex/documentation/index.html
    Enjoy the wonderful world of APEX!
    Mike

  • How can I import vob files into imovie 09?

    how can I import vob files into imovie 09? i have some home movies on dvd that i want to edit.

    You might want to look at this one too.  Very easy to use and it doesn't require the Apple MPEG-2 playback component.
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm

  • How can i import mpeg files into iMovie?

    how can i import mpeg files into iMovie?

    Where are your MPEG stored?
    I have hundreds of old MPEGs stored in my nexternal drive, but unfortunatly i was not able import them into iMovie. I did the following trick: I created a new set of a folder and subfolder and called it "Virtual_CAM/DCIM" and saved it on my desktop. Then went to Disk Utilities>File Menue>New>Disk Image from Folder. Then selected the folder on my desktop and clicked enter. I moved the .dmg file to my external (or just keep it on your desktop). I clicked on the .dmg file. It shoud be visible on the Finder. Open your Imovie and import as you do from your camera.

Maybe you are looking for

  • Iweb site for use with my own hosting company, not .mac

    Hello, What I would like to do is setup a photo album site in iweb but export it to ftp to my own hosting company. I noticed on a link found here that if you do so you lose the ability to have a slideshow......will this effect the ability for a perso

  • Attributes of request do not match buffer attributes

    Hi all, I created a connector of the type 'SAP File Search' in the Enterprise Search Cockpit. But the connector cannot be setted to an active status and when i'm executing the consistency check i get the error message "Attributes of request xx, conne

  • Process Using too much Processor

    Hi all ! I have a real wierd request. I have a process which runs for about a hour converting files. The process only between 10 and 15MB of memory which is fine. The problem is that the process uses basically all the processing power available on th

  • SAP XI 2, JDBC Inbound Adapter. Non Unicode data problem.

    Hi All, As far a I understand the data from inbout JDBC adapter in XI 2 should be in Unicode format. Is it possible to accept non unicode data using this adapter? If answer is yes then how to specify correct data encoding? Best Regards. Victor.

  • Wrong convertation of script in view editor

    hi, i try to create view in datamodeler and in area for script paste my query. after pushing button "Test query" i receive message "Query executed successfully."... fine, but after that i push button "apply" and my script was changed and button "test