Can't import midi files in garageband 11 after lion install?

I can't import or open midi files in garageband 11 ,tried reinstalling from my app dvd, will not allow, it is grayed out was using snow leopard and updated
to lion and thats when it quit also my quicktime pro 7 will no longer export midi.

Same here. Now that I think of it, I recently put in Logic Studio 8 and Garageband didn't open on it's own anymore. That was iLife'06. I then up-graded to iLife '08 and Garageband still doesn't open to a new project. The only way I can still open Garageband is to make a "template" out of one of their demos, then when that opens I strip the tracks out and start with new ones. By the way, I just tried to install XLN Audio's Addictive Drums. They work in Logic Studio, but do not open at all in Garageband. Error message says the plug-in is not "valid". So much for Garageband being easier than Logic.

Similar Messages

  • CAN'T IMPORT MIDI FILES INTO GARAGEBAND

    Installed iLife '08 in order to use the new GarageBand. However, when I open up a new track and drop a MIDI file onto the window both the MIDI file and the track disappear. Any remedies?

    Same here. Now that I think of it, I recently put in Logic Studio 8 and Garageband didn't open on it's own anymore. That was iLife'06. I then up-graded to iLife '08 and Garageband still doesn't open to a new project. The only way I can still open Garageband is to make a "template" out of one of their demos, then when that opens I strip the tracks out and start with new ones. By the way, I just tried to install XLN Audio's Addictive Drums. They work in Logic Studio, but do not open at all in Garageband. Error message says the plug-in is not "valid". So much for Garageband being easier than Logic.

  • No sound in garageband after Lion install.

    No sound in garageband after Lion install, can anybody help please?

    12 hours ago my midi played through Garageband with no problems. Today it does not play. The Garageband window shows that the keys are being played.
    In the moments following I turned on iTunes and all was fine so I burned a disc in my usual factory installed burner, late 2008 iMac, and the message was "no disc burner found". I turned iTunes on and off and same message. Ran Disc Utility and no flags. I am using the Disc Utility that is on my desktop. Is there a hidden Lion disc utility? Nothing worked unless there is a hidden function.
    I was able to burn using Toast. This would indicate that the problems is with iTunes 10, OS 10.7.1

  • Can't import MIDI file

    I am not able to drag a MIDI file into Garageband 3.0.4. I know I've been able to do this in the past but when I drag the file to a track or the blank area below the tracks nothing happens. Any ideas?

    Some MIDI files are in a non-standard format. if you have QuickTime Pro you can open the file in QuickTime Player and then export it as a "Standard MIDI FIle" and it will work in GB. ~~Hang

  • Can't import audio files in FCP after snow leopard update

    i've recently updated to snow leopard. and i'm running Final Cut Pro 6.0.6
    i opened a .fcp project i created a long time ago. i tried to import a .aif file and final cut crashes. i converted the .aif file to a .mp3 file. tried to import it, and final cut crashed.
    i then went and deleted the preference files for final cut pro, reopened final cut, tried importing both files again, it still crashes.
    does anyone have a legitimate answer for why this is happening?

    BenB wrote:
    1st, FCP does not officially support MP3 audio files, so don't even use them. I'm running FCP 7 on Snow Leopard, no problems with audio files.
    1- How are you encoding them? What software is creating these files?
    2- Are you running on an external FW800 drive?
    3- How much RAM are you running?
    And as my final observation is, NEVER run Final Cut Pro 6 on Snow Leopard! Huge no-no! If you upgrade to Snow Leopard, only use FCS3. I've updated lots of systems for my students and clients, and I've seen lots of FCP6 on SL problems.
    Message was edited by: BenB
    I agree that you shouldn't use MP3 files with FCP, the manual tells you that somewhere If I recall properly, but it shouldn't cause Final Cut to crash, at least that has never been my experience, it has just caused a skipping problem, or not playing the complete song.
    I don't really understand wht a FW800 drive or the amount of RAM have to do with it, it would sure be interesting to hear your comments on that.
    However, in all due respect, to make the statement that one should NEVER run Final Cut Pro 6 on Snow Leopard seems pretty "out there" would you be so kind as to provide your rationale for such a drastic statement as that. Has there been anything official from Apple along those lines?

  • Cannot import midi files into GarageBand 2.02

    not even sure this relates to Quick time but this is one of the only things i upgraded on both my G5's.
    this import wont work with any of these files i made from cubase. i get vent du midi to work. but they wont import
    I can import files off the web.
    anyone with a clue

    Same here. Now that I think of it, I recently put in Logic Studio 8 and Garageband didn't open on it's own anymore. That was iLife'06. I then up-graded to iLife '08 and Garageband still doesn't open to a new project. The only way I can still open Garageband is to make a "template" out of one of their demos, then when that opens I strip the tracks out and start with new ones. By the way, I just tried to install XLN Audio's Addictive Drums. They work in Logic Studio, but do not open at all in Garageband. Error message says the plug-in is not "valid". So much for Garageband being easier than Logic.

  • Can't Import audio files into Garageband (MP3's, Aiff's). Lion OS. PLEASE HELP!!

    Everything is lower case. I dragged a file from the finder, it shows the plus sign, and say's it's converting, and it adds a new track, but nothing shows up... Dragging from itunes does even less -doesn't even show a plus sign or convert at all... I recently upgraded to Lion, and also upgraded to Garageband 11, though I never tried this with Garageband in the past.  Please help. It's sorta urgent.
    THANKS!!!!

    When you open GarageBand the image on the far right is selected to the "i" button.
    Select the Media Button on the right
    Select iTunes it should open your entire music library.  Dang and drop any song into GarageBand.  Kinda lame that Lion wont let you drang and drop from iTunes anymore, but this seems to work just as well.

  • HT4622 How to import .band and .mid files into GarageBand for iOS

    Using GarageBand for MacOS X, I have no difficulty importing and playing .mid (MIDI) files.  Indeed, I can even rename .kar (Karaoke) files to .mid, import them into GarageBand for MacOS X and see the lyrics along with the score.  Using File Sharing for iOS apps in iTunes.app, I have tried to import .mid and .band files (made from .mid files with GarageBand for MacOS X) using this mechanism.  I get no errors but it doesn't seem to work.  That is, neither the .band file nor the .mid file are accessible from within GarageBand for iOS as far as I can tell.  What should I be doing instead?

    As I understand it GarageBand for iOS .band projects can be imported to GarageBand for OS X, but the reverse isn't true. GarageBand for iOS does not import midi files.
    The File Sharing section of iTunes doesn't validate the files you put into it, but if the app doesn't like the structure of the file it will just ignore it.
    tt2

  • After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow?  Thank you, Filippo

    On IMac 10.9  After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now?  Anyone know?  Thanks, Filippo

    I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
    I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
    Thanks

  • One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this?

    One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this? is in final cut pro 10.1.4

  • Can I Export midi files out of garageband 1.1

    Can I Export midi files out of garageband 1.1. If so, How?

    77music wrote:
    how can I export midi files from new garageband 10/ 2013?
    unfortunately, like the previous 6 versions of GB, MIDI export is not supported. you would need to open the file in Logic in order to do that

  • Hey guys, my question is how can I export midi files from new garageband 10/ 2013? Thanks

    Hey guys, my question is how can I export midi files from new garageband 10/ 2013? Thanks

    77music wrote:
    how can I export midi files from new garageband 10/ 2013?
    unfortunately, like the previous 6 versions of GB, MIDI export is not supported. you would need to open the file in Logic in order to do that

  • Having problem importing midi files.

    Hello everyone,
    I am having trouble importing midi files in GB. Every time I do all I get is a single insrument, and not the whole midi file as it was when I downloaded it. I tried Dent du midi and cant even get that to work. It looks like it is working, but never seperates the tracks. I would really like to be able to pick apart midi files. Anyone have any ideas. This is my first Apple, but I have been a PC Tech for 8 years now. (I Hate PCs, I love the Mac)

    Welcome to the forum. Yes, sometimes these issues occur. Since I am the biggest importer of MIDI files to GB3, I will see what I can do for you.
    First, when you wish to import a MIDI, drag the file onto an empty area (ie no tracks) of the GarageBand window. Hold until you see a + sign. Drop, and you should see the tracks appear.
    How did you obtain the MIDI file? From the Net? How did you save it? What were the steps?
    Do you have Quicktime Pro? Sometimes the way you save a MIDI file will make a difference. You have a choice between "save as movie" or "save as source", and I believe the latter works best.
    Has it worked for other MIDI files? Or is one or two giving you issues? Perhaps if you can post a link to the MIDI file, I can have a look at it.

  • How to import midi files into garage band for ipad

    I have the newest iPad and installed Garage Band.  I don't have a MAC computer, only Windows machines.  I want to use the iPad to send the midi files to a Roland 150 keyboard to make it play the music.  Is this even possible?  The Roland has Midi In and Out ports and I have the camera adapter kit and a Yamaha UX16 USB to Midi cable.

    You cannot export midi files from GarageBand, sorry. You can only share audio files in aac-format or GarageBand project files, and both are not midi. See what is currently supported: http://help.apple.com/garageband/ipad/1.2/index.html#chsec12c387
    Regards
    Léonie

  • Can't import prores files into Premiere Pro CC or SpeedGrade CC

    Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
    I also can't export to DNxHD files to an MXF file either.
    I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
    Conflict?

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

Maybe you are looking for

  • Motion 3 - Crashes every time I try to change font

    I'm having trouble with Motion on my Mac Pro at work. I'm trying to create a title graphic. I can create a text layer and type the text, but when I choose the font drop-down list from the HUD, Motion crashes. Help! It's getting a little frustrating.

  • How to move Mail and Address book content from 10.3 emac to 10.5 iMac

    How do I move Mail and Address book content from my old 10.3 emac to my new 10.5 Leopard iMac directly, or do I have to move the names etc, one by one? Richard

  • Use of backslash sign but not in fraction format

    I have trouble formatting a cell so that a backslash sign does not read as a fraction. A cell formatted as "automatic" will return 88/97 when I type 88/97, but 1 9/88 if I type 97/88. I could not find the relevant instruction in the user guide.

  • Material Priceing Report

    Hello every body,                Plz help me, I am stuck with a report is to display all the priceing details based on Sales organization and division ( Material Priceing Report ) Kindly Plz send me as early as possible.

  • [OSB1031] how to call a RESTful service from OSB with authentication

    Hi all, I called successfully a RESTful service from OSB. We have a business service, named OrderTracer, that wraps the call to the RESTful service. The RESTful service requires an authentication so we are trying to find out how the OSB business serv