Can't import MOV files from JVC GY-HM650U Camera

Hi,
For some reason when I try to import an MOV into premiere that was generated by this JVC camera, I get an error:
" The file has to audio or video streams".
It plays fine in VLC player. I tried converting it to MP4 using ffmpeg.exe. Still get the same error. I don't want to have to re-encode it using another tool just to bring it into premiere for editing, this makes no sense. Usually premiere is pretty good about bringing in just about any kind of file.
We did recently upgrade to Premiere CC 2014, I never had this problem with the older version.
Strange. Any suggestions?

Welcome to Apple Discussions,
What model of Kodak is it?
There is a discussion thread on this topic: http://discussions.apple.com/thread.jspa?messageID=11942367&#11942367
Try using a media card reader (sometimes built into printers) to see if that allows the import. Others seem to report having luck by importing the movies off the card using a different computer, deleting them, and then importing the pictures.
Hope that helps.

Similar Messages

Can't import .mov files from my camera into iPhoto

I am not able to import .mov files from my kodak camera into iPhoto. It says the file is not readable. Also, if there are any photos after the video file, those are said to be unreadable too, even if I select just the photots for import. I tried to import the .mov file with image capture as well, and that gave me an import error also. I can view the file fine on my camera and iPhoto and image capture both will give me the properties of the video file but will not import. I have imported .miv files before with no trouble. I have tried several different files with the same results. Even tried different memory cards. Not sure how to get this file on my computer or why there is a problem all of the sudden.
Thanks.

Welcome to Apple Discussions,
What model of Kodak is it?
There is a discussion thread on this topic: http://discussions.apple.com/thread.jspa?messageID=11942367&#11942367
Try using a media card reader (sometimes built into printers) to see if that allows the import. Others seem to report having luck by importing the movies off the card using a different computer, deleting them, and then importing the pictures.
Hope that helps.

Cannot import .mov files (from JVC HM100) into After Effects CS6

Hi,
I am trying to import .mov files into After Effects CS6. Unfortunately, when I try to import the .mov files, AE tells me "After Effects error: 210_0001_01.mov cannot be imported -- this '.mov' file is damaged or unsupported." The file works in Premiere CS6. I have the latest Quicktime, and even with Quicktime 7 Pro installed, I got that same result. I would appreciate any advice on this problem.
Thank you.

RobertHorn2012 wrote:
I'm going to set up a new sequence with just the clip I'm using after effects on. I'm going to import that sequence into AE.
Your footage is currently a long-gop codec, which may be giving Mocha fits. So instead of Dynamic Link, you may want to simply export the clip in question from Premiere using a lossless codec. Remember to leave handles on the footage.
To get back to Premiere you would then render in a lossless codec. It's not very handy, but it will get the job done.
Give it a try and see what happens.

Can't import .mov file from iphoto

Can anyone tell me why I can't import an .mov file into imovie from iphoto. The help manual says I should be able to but. when I try, the .mov files on the import window are greyed out and not selectable. I thought imovie played this type of file.

Can anyone tell me why I can't import an .mov file into imovie from iphoto. The help manual says I should be able to but. when I try, the .mov files on the import window are greyed out and not selectable. I thought imovie played this type of file.
MOV files are compatible with iMovie '08 if, and only if, both the audio and video compression formats are "edit" compatible with iMovie '08 and the MOV file container does not contain incompatible extraneous tracks (e.g. a "Tween" track). Kodak, for instance, stores its video clips as MPEG-4 video (compatible with iMovie '08) and µ-Law 2:1 compressed audio (which is not). In this case, all you would need to do would be to convert the µ-Law compressed audio to a compatible compression format like AAC (MPEG-4 audio). Another example would be a slideshow made in iPhoto. In this case a "Tween" track is used to transition between slides but is never removed once the transition is applied and results are re-saved in the MOV container. If you delete or strip out this track, the file then becomes compatible with iMovie '08.

QTP can't read .mp4 files from JVC HM-100 cam...

My QTP gives me the following message when I try to open an .mp4 file created with a JVC HM-100 camera: "The movie could not be opened. The movie contains some invalid data."
VLC and iSkysoft (video converter) can read the file with no problem, so it can't be corrupt. I put a similar post in a thread about the JVC cam, but no one knew a solution.
Right now, it looks like the only way to convert the mp4 files from the JVC HM-100 is to buy a video converter software for $50 because QuicktimePro, which cost me $30, can't do this, even though it claims to support mp4. Any ideas here?
So in lieu of QTP, are video converters like iSkySoft reliable enough to use? Do I risk losing any quality? Am I forced to pay for 3rd party functionality again that I already paid for in QTP?
Thanks... David

Problem solved.
I used the FREE software ffmpegX to convert the mp4 files.
So why does FREE software do the job that PAY software like QTP promises to do, but can't deliver?
Hmmm?
David

Will FC X import XDCAM.mov files FROM JVC, not XDCAM EX ?

Will FC X import XDCAM.mov files FROM JVC, not XDCAM EX ?

Hi Kenneth,
We work with Sony XDCAM, and as long as I know you can only export it to .MXF or .MP4 (XDCAM EX).
Kind Regards,
Roberio

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

I can not import 60p files from Sony NEX-FS100U to Final Cut Pro X.

I can not import 60p files from my Sony NEX-FS100U to Final Cut Pro 10.0.1. Does Sony offer a plug in?

I shoot fishing footage of big catches. Slow motion playback appears to me to be much better when shot it 60p even compared to 60i. It also blows away all of the other formats for a "still" grab. Thank you for your help as I did a search and downloaded Clip Wrap which converted the files to .mov and they actually do import the full 60 frames. Thank you again for your reply.

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

Can I import movies originating from video's that were put on a DVD import in IMovie?, Can I import movies originating from video's that were put on a DVD import in IMovie?

Can I import movies originating from video's that were put on a DVD import into IMovie?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Luis Sequeira1 wrote:
b) Use an utility like Clipwrap or MPEG Streamclip to convert the mts file to a quicktime (mov) file
Luis,
Just to clarify one point…in order for Streamclip to convert the MTS I believe a plug-in like the AVCCAM QuickTime importer from Panasonic needs to be installed. (Credit David McClain over at the FCS boards for that info.)
Russ

I updated my computer and now I can't play mov files from anywhere

I updated my computer and now I can't play mov files from anywhere - won't play in FCP 7, Quicktime. Not sure what updates they were specifically since i hit the "update All" button without going over each one. Please help!! operating on 10.6.8 with FCP7

Just take a look at the last few days posts here and you'll see many people with the same problem and some possible solutions.
But you should never do any software updates unless you have a bootable backup of your startup drive. FCP7 is no longer being supported by apple and updating anything is fraught with dangers.

How can I import Raw files from a canon eos 6d?

How can I import RAW files from a Canon Eos 6D into aperture?

Doesn;t look like the 6d is supported yet. I'm surprised, thought it would have been in the latest update, 4.02.
In the meantime you can shot RAW+JPG and use the JPG's now and then switch to the RAW's once it is supported or else you an convert the RAWs to DNG using Adobe's converter and import the DNGs.
While I can't say for sure Canon cameras are usually supported fairly quickly so hopefully you won't have to much longer to wait.
regards
And in the meantime let Apple now you want this see Aperture->Provide Aperture Feedback

Must I use a converter program to import movie files from Canon powershot s95?

Must I use a converter program to import movie files from Canon powershot s95?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
With Elements 11 you cannot.
The SX60 HS was first supported in Camera Raw 8.7 which is only compatible with Elements 13 and later.
Options:
Pay to upgrade to Elements 13
Free option: download the Adobe DNG converter, convert all SX60 HS Raw files to DNG format then edit the DNGs in Elements 11
Photoshop Help | Digital Negative (DNG)

Unable to import movie files from iphoto '08 into imovie HD

I have recently bought a 2008 macbook (2.2 GHz) and have recently downloaded imovie HD in addition to owning iLife '08 due to its extra capabilities. I have found that I am unable to import any of my movie files from my iphoto library folder as it seems to need to open the actual iphoto application before the files can be accessed. In addition, when not using any specific program it would be nice to be able to access my photo/video files within the iphoto folder without iphoto automatically opening as the default viewer.
Any ideas??!! Thanks.

ahostmadsen wrote:
.. and I import AVI video clips directly without converting to .dv, without problems.
lucky you.. .avi is just a container, no 'format'/codec .. I can show you dozends of .avis, which will NOT import into iMHD6, due to being playback-codecs, not convertable by the underlying Quicktime engine into separte, editable audio+video streams ..
.. If you convert to .dv, the size just blows up.
dv is 13GB/h and a codec meant for editing; e.g. it stores every frame (video=30 frams/sec) of a recording, as mpegs usually doesn't do so.. = your Mac has to estimate content, when converting and 'recovering' the content = lossy process.
iMHD6 is a dv-editor; the mpeg4 feature is only a toy, to spice up iSight recordings.. for sure, the QTengine can convert a lot, but too much conversion (from one lossy codec, e.g. divx, into another, e.g. mp4) means a (dramatic) loss of pic quality..
my 5€ cents ..

Can't import MOV files from JVC GY-HM650U Camera

Similar Messages

Maybe you are looking for