Can´t Import .mxf Files.

i´ve just updated to premiere pro cc 2014. now i can´t import mxf files anymore. when trying i get an error-message, that something went wrong, but no explanation. so what can i do?, does any body know the problem?
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

Try moving or renaming the folder the media is is.

Similar Messages

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

    I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.  Any help is appreciated.

    Russ and Luis,
    I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in.   Still no luck.  I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support  This is where it is supposed to be as far as I can figure out. 
    Another piece of the puzzle is that  footage shot on a Canon C300 in 2013 and  I reimported today and it DOES import into FCP10.1.3.   Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX.  The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
    Any ideas?  (screen shots below)
    Thanks.
    Peace, Huey
    FYI Here is what Canon says
      "There is another trick that works sometimes though.  Try uninstalling the plugin and XF Utility.  Then, install the latest XF Utility, followed by the plugin, in that order."
    I did do this but no results.  Otherwise they say I need to wait for a new plugin.
    Here's 2014 Canon C300 files does NOT import to FCPX
    Here's 2013 Canon C300 files does import into FCPX.  I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that. 

  • Can not import MXF files into Final Cut Pro

    I am full of anger and frustration!!! I purchased final cut pro only to find out that it WILL NOT import MXF files. How insane is that? ADOBE - NO PROBLEM. Then I had to go back to YOUR STORE and buy two different file converter applications before I found one that worked. Now FINAL CUT PRO will only import the audio segment of converted files after converting to PRORES in PAVTUBE. Are you BUCKING kidding me? This work flow BLOWS. Why the FELL does this have to be sooooo hard!  I am gone to creative cow and other forums to try to find out why I am sooo stupid that I can't get this simple process sorted out. YOU BUCKING MONEY MACHINE! How many more aps will I have to buy before I can edit CANON XF100 files in Final Cut Pro. BUCK politics! You should make your software with plugins that would allow you to edit without this kind of added step. JUST LIKE ADOBE. I want refunds for my final cut pro purchase. This is BUCKING rediculous. What a waste of time!

    Jeff Eyler wrote:
      Good thing I still have an iMac on Snow Leopard with FCP7 where I can import these files.  I was hoping to upgrade that system next month when the new iMac comes out
    There is definite upside to dragging one's feet on upgrades until necessary and this is a prime example. On a desktop running 10.6, and the XF Utility, FCP 7 L&T works reliably. And like you, that's my workflow for FCPX projects. Running 10,7 on a laptop, the EOS plug-in works well for FCPX imports – no workarounds needed. When I finally get around to updating, I will partition the HD, with one SL partition and the other partition with a later OS. Of course this strategy will work only as long as my hardware holds up.
    Russ

  • Can't import mxf-files (Canon XF100) into FCP 10.0.8 after Mavericks

    Hello
    It's not possible for me, to import mxf-files into FCP.
    I haven't yoused FCP for a couple of days, but today I could not import files from my Canon XF100, so i think the problems came with Mavericks??
    Does any of you have same problems?
    What to do?
    Kind regards
    Thomas (Denmark)

    Hi Russ -
    I downloaded the utility and driver from here:
    http://www.learn.usa.canon.com/resources/blogs/2012/20120223_xf_utilities_and_pl ugin_updates.shtml
    But after looking around realized it isn't updated for Mavericks yet. I was only given two files and both weren't in any sort of directory structure- here is a screenshot.
    Thanks in advance for your help!
    -Robert

  • Premiere CS4 I Can't Import .MXF files but Adobe assures me i can?????

    Hi I have Adobe Premiere CS4 and I am trying to import some videos to it and they are in .MXF format. Premiere issues me "codec missing or unavailable" and I don't want to download some sort of converter. Isn't Premiere supposed to support .MXF files?????????

    Not sure about CS4, I started with CS6. And hope I'm not being preachy here, but an awful lot of troubles over MXF files have the same root problems. Even some very experienced editors have had issues with this. The vast majority of the times this error comes up people have not imported as PrPro needs it ... MXF files are a form of AVCHD ... the camera makes separate (and oft fairly short) sections of video file and matching audio files, stored on the cam in separate folders, with a database to tell any further software use which pieces are part of the same "full-length" clip, and that data is stored in a different folder-tree from the other files. If you don't properly import the whole folder tree, PrPro says ... no go.
    So ... when uploading onto the computer, or moving the files around to various drives, you ALWAYS need to take the entire folder-tree from the camera and move it intact. Some other softwares manage to sort out MXF/AVCHD files while the top level folder didn't get copied, PrPro probably will choke. Next, you need to navigate to the files in the Media Browser and then select and "Import" those files, then work them from the Project panel.
    Oh ... and often times if these are on external drives, PrPro can be picky about seeing/working with them.
    Neil

  • Can't importe MXF-File from Canon XF300, 4.2.2 codec

    premiere pro 4.2.1 say the video is too big; doesn't CS4 support this codec???

    sounds suspiciously like the prores 4.2.2. from panivision genesis..maybe close to hdcam hd...
    some info on that stuff that might help determine custom settings, maybe conversion first without loss...etc..
    hdcam hd
    http://www.apple.com/finalcutstudio/resources/white_papers/Sony_XDCAMHD_whitepaper.pdf
    Ingest
    Once all footage has been shot, it must be transferred to a computer hard disk for
    editing and converted into a format editable by Final Cut Pro. Although the XDCAM
    HD camera records directly to digital files on the Professional Disc, the files are stored
    in a special file type called MXF (Material Exchange Format).
    In order to edit the files in Final Cut Pro, the data within the MXF files must be transferred
    to QuickTime files. This translation does not damage or cause quality loss to the
    video files. The MPEG HD data is simply unwrapped from the MXF file and rewrapped
    in a QuickTime file.
    One additional benefit of the XDCAM HD format is that low-resolution proxies of every
    clip are automatically created and stored on the Professional Disc media. These proxies
    allow you to quickly view the clips before importing the full-resolution data and
    choose which clips to ingest and which to leave on the Professional Disc media. You
    can even log different sections of the proxy clips (using In and Out points) to avoid
    importing unwanted parts of the full-resolution HD files you may not need for editing.
    more info
    http://bssc.sel.sony.com/BroadcastandBusiness/docs/brochures/v-2320.pdf
    ps...I imagine the camera manufacturer would have info available for editing this material , maybe free software for "capturing", conversions, etc

  • Can't import .MXF files into FCP7

    I have several .MXF files (Sony XDCAM) I'm trying to import into FCP7.
    I downloaded the plug-in from Sony's website, and installed it -- but Log & Transfer does not allow me to import the .MXF files.
    What should I do?
    (I've also tried ClipWrap -- did not work for this.)

    First off...please tell me you have the FULL card structure, and not just the MXF files.
    Second, you need to use the Sony XDCAM TRANSFER UTILITY for this. Log and Transfer doesn't work.  If you install the utility, it should show up in FCP as an option, or you can convert outside of FCP, and then import the converted QT files.
    Clipwrap is only for AVCHD files.

  • Can't import mxf files into AE CS5.5 beyond that the files were rendered on the same AE

    When I try to import a MXF file AE crash inmediatly. The weird thig is that these MXF files were rendered in the same AE.
    I rendered my composition in MXF xdcamhd 50PAL, then when I try to load it in AE it crashes!! But in Premiere Pro this problem do not happens. I can load them in it fine.
    The Error message is:
    "After Effects error: Crash in progress. last logged message was: <7984>
              <DynamicLink> <5> 000000001C817BB0"
    Then the message to contact Adobe Technical Support (0::42)
    Then the chance to save the project
    I'm in AE 5.5 (10.5.0.253) - Windows 7 Ultimate SP1 - Intel i7 - 8gb ram

    MOV is a container format which may contain all kinds of codec, while iTunes only import MOV whose video codec is DV, MPEG-2, MPEG-4, H.264, or AIC.
    Even if the MOV meet the above requirement and supported and playable in iTunes, it will still fail to sync to iPod/iPad/iPhone/Apple TV if the MOV video does not fit the specification like resolution, bit rate, aspect ratio, size, and audio codec of the iPod/iPad/iPhone/Apple TV.
    In order to successfully import MOV to iTunes as well as sync MOV to Apple TV, iPod, iPhone, iPad, we have better convert the MOV video to a more compatible video format.
    Step by step guide on how to convert itunes unsupported mov to itunes supported one at How to Solve Can't Add MOV to iTunes to Play MOV in iTunes/iPod/iPad?

  • Can I import MXF Files directly into CC Premiere Pro

    I'm currently running CS5 and I have to use a 3rd party converter to edit MFX files. I shot on a sony f5 and I would like to use the original files as i'm losing quality via these converters. I need to upgrade to the CC but would love to know if these files can be imported directly.

    CS6 and later all support MXF files. Your dilemma is whether to upgrade to CS6 perpetual or start renting forever with no way back.

  • How can I import mxf files from my Canon XF100?

    I downloaded software/plugins from Canon. Didn't help.

    Here is the plug-in you need.
    These files import easily into FCPX with this installed. (Don't pay for a converter.)
    Use a card reader. Import directly from the card or make a camera archive.
    Good luck.
    Russ

  • Trouble importing .mxf files into Premiere Pro CS6

    Having problems importing MXF. file types into my Premiere CS6 project. I will go to import the folder and the yellow loading bar will come up to say that it's importing. Then it will freeze and the color wheeled loading symbol will come up (I'm using a Mac) and will just sit there. From there I'm forced to do a force quit on my project and re-open it again. Is there any way to fix this issue and if so what is the problem causing this issue?
    Also my mac is running on OSX v10.7.5 and Premiere is running on cs6 v6.0.2

    Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
    So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

  • Trouble importing MXF files into Premiere Pro CC

    When importing MXF files into Premier Pro (CC or CS6) from a Canon C300, If I have stopped and started the Camera (during an interview for instance) ie, if there are several takes, multiple duplicate verions of my fooatge appear in the folder on my card, when viewed through the media browser in Premier Pro.
    If I try to ingest the footage into Premiere Pro (CC/CS6) or use Prelude (CC/CS6) the conformed footage file does not start in the right place. Example, an interview with two takes once ingested (as one file) has the second take first.
    Has anybody else encountered this?

    Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
    So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

  • How to import MXF files to Final Cut Pro with smooth editing

    Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
    If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
    you may be familiar with Material eXchange Format (MXF). Though MXF is a
    great video format to record high-definition videos, it is not easy to
    use in that they are not natively supported by most NLE systems like
    Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
    Along with some help from a top MXF Converter, it can be done. To
    help those who wanna edit MXF files in FCP without problems, here I
    share with you a simple guide on how to convert MXF files to edit in
    Final Cut Pro 6/7 or FCP X.
    First of all, downloading the App- Brorsoft MXF Converter for Mac
    Overall, the program is a professional yet easy-to-use MXF Converter
    on Mac (Mavericks included) which can not only convert XF100, Canon
    C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
    simple video editing functions for you. The MXF to FCP Converter not
    only can convert MXF to ProRes for FCP, but also can transcode MXF
    videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
    Just download it and follow the tutorial below to get the work done.
    Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
    1. Import MXF files to the converter
    Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
    2. Select FCP editable format
    Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
    Tips:
    a. Settings- click to set video
    resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
    20Mbps), frame rate (24p/30p)
    b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
    3. Start transcoding MXF video to FCP
    Click “Convert” button to start converting MXF files to Apple ProRes
    MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
    is done, you can transfer MXF footage into Final Cut Pro (X) for editing
    smoothly on Mac with ease.
    Source:How to import MXF files to Final Cut Pro with smooth editing
    [quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

    You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
    It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

  • Can't import prores files into Premiere Pro CC or SpeedGrade CC

    Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
    I also can't export to DNxHD files to an MXF file either.
    I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
    Conflict?

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

Maybe you are looking for