Can't import RAW files into iPhoto 6 Library from Nikon D700

For whatever reason I am unable to import RAW files from my Nikon D700 into my iPhoto 6 (version 6.0.6) Library. I can import JPEGs from the D700, but it's no-go with the RAW files. When I attempt to import the RAW files I get the following message:
"Unreadable Files
The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)."
Can anybody solve this mystery for me?
Bob

Bob
I presume that the economically-priced Mac Box Set containing OS X 10.5.6 Leopard, iLife '09, and iWork '09 would be the way to go. Do you concur?
Well that's the cheapest way to do it. You could, of course, buy a new Mac
Do you feel that my 20" Intel iMac--details listed below--would have any problems handling the upgraded programs?
It will have no problems with the updated OS or applications.
'm uneasy at the thought of upgrading my operating system, but I presume that chances of running into problems are much less than if I were upgrading a Windows OS. In case a problem arises my entire hard drive is backed up with a 1T external hard drive using SuperDuper software, but I prefer not to encounter a situation requiring me to use it for restoration purposes.
The key to any update or upgrade is to make sure that you have a good working back up. That way, should anything go wrong, you have a quick way back to where you started.
My tips for upgrading the OS? Disconnect the disk with the back up and all other peripherals when you do the Upgrade. Pop the disk in. Do a standard Upgrade. (There are some folks who swear that you should wipe your HD and start over from scratch before you do, but, frankly, that's overkill. I've been upgrading Macs since 1992 and never had a problem.
Regards
TD

Similar Messages

  • How can i import raw files into iphoto from my Nikon D300?

    Just got a Nikon D300, and it will import jpg and tff, but not raw (nef) files-i prefer iphoto to their software- Nikon says to try talking to apple to find a way to do it- does anyone know any info that can help? I need to decide if I am keeping the camera-from other posts it doesn't look like buying aperture will help either- thanks.

    I would not ditch a camera because of this! If you like the camera, there will always be a way to import Canikon RAW files, though you may need to do some upgrading, and it may take some time for Apple to support a new camera.
    Message was edited by: Keith Barkley

  • I can't import raw files into lightroom

    I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

    I don't use nikon software.  I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
    Sent from Yahoo Mail on Android
    From:"dj_paige" <[email protected]>
    Date:Thu, Apr 23, 2015 at 10:22 AM
    Subject:[Photoshop Lightroom] I can't import raw files into lightroom
    I can't import raw files into lightroom
    created by dj_paige in Photoshop Lightroom - View the full discussion
    Do you have Lightroom 5.3 or higher?
    Did you use Nikon software at any point on these photos?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How do I not import RAW files into iPhoto

    I shoot RAW + Jpeg with my cameras... Up until a recent upgrade to Mavericks... I would put the SD card in the iMac and it would import all the JPEGs, and then say something like 75 files could not be downloaded.
    Those were the large RAW files and I would then just move them to an External Hard-drive and use Lightroom and Canon's DPP to edit them.
    After the OS upgrade the RAW and JPEGs now both import into iPhoto and onto the Mac Hard-drive.
    I can't seem to find a way to not import the RAW file into iPhoto. Is there something I am missing?   I do not want those large RAW files wasting space on the mac, and I have notice iPhoto is really slow since the upgrade.  
    Thanks for any help

    A. To move an iPhoto Library:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    B. iPhoto and Raw
    1. The Raw processing engine in iPhoto the same one used in Aperture, but with less fine control. (Think of the differences between Word and TextEdit, iMovie and Final Cut).
    2. Processing Raw in a 3rd Party Application
    You can also process your Raw with a 3rd Party app like ACR or Photoshop. But iPhoto does not handle this gracefully and it's a bit of a kludge.
    First off set your preferred app as an external editor in iPhoto:
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
    Next: In the iPhoto Preferences -> Advanced, elect to use Raw with your External editor:
    Now when you go to edit the Raw it will be sent to your external editor.
    Now for the kludge:
    You cannot save a Raw. The work you do must be output to a new file, in a new format (jepg, tiff, whatever). However, as the External Editor is making this new file iPhoto has no knowledge of its existence. Therefore you must save it to the desktop and then import it back to iPhoto as a new file.
    This means that you will have your Original Raw and the processed version in iPhoto but they will not be recognised as version and original. iPhoto will see them as two separate shots.
    Further - and this is quite a consideration: Lightroom is not an editor. Like iPhoto it's a database app and images need to be imported, processed and exported from it. It occupies the same place in the workflow (manager/non-destructive processing) as iPhoto does so in makes zero sense to use both...
    Regards
    TD

  • IPhoto:  How can I import pdf files into iPhoto?

    It seemed to work before but I can no longer import pdf files into iPhoto.  What heppened and how can fix it?  Many thanks in advance ... Abe

    Have you tried opening the PDF in Preview and printing using the PDF option selecting save PDF to iPhoto?
    LN

  • How can I import DNG files into iPhoto 8?

    Shooting with a Canon Rebel XT, I've downloaded RAW files onto my hard drive, edited them in Adobe Camera Raw (ACR) and saved them as digital negatives (DNG) with the .dng extension. Bridge and iPhoto work with these just fine, but iPhoto doesn't seem to want to import them.
    Aside from saving them as jpegs or TIFFs, is there any way to get these files to play nice with iPhoto 8?

    I'm having the same problem with iPhoto after editing my images in Bridge and converting the files to DNG before importing to iPhoto. The metadata on the DNG file will not show up in iPhoto when I import DNG files. Yet, if I convert the DNG files to JPEG and import the JPEG files into iPhoto all the metadata and keywords in the original DNG files is imported. I use Bridge and CS3 for editing but want to use iPhoto for asset management.

  • Import Raw files into iphoto

    I'm having the same problem importing raw .nef files with a Coolpix5400, which is listed as acceptable for raw import into iphoto. There are several work arounds which seem to work for system 10.4.8 and iphoto 6.0.5. However, my experience is they don't work for systems 10.4.9 or 10.4.10 with iphoto 6.0.6.
    If there is no other way, I guess I could reinstall 10.4.8 and iphoto 6.0.5, get raw to work, and then go back to system 10.4.10 and iphoto 6.0.6.
    Has anyone had experience with raw files in iphoto 6.0.6 and system 10.4.10?
    I know the original question was listed as answered. For some reason I could not enter a new question so I tried this way as a last resort.
    Thanks.
    G4 Mac OS X (10.4.10) iphoto 6.0.6

    Bob
    I presume that the economically-priced Mac Box Set containing OS X 10.5.6 Leopard, iLife '09, and iWork '09 would be the way to go. Do you concur?
    Well that's the cheapest way to do it. You could, of course, buy a new Mac
    Do you feel that my 20" Intel iMac--details listed below--would have any problems handling the upgraded programs?
    It will have no problems with the updated OS or applications.
    'm uneasy at the thought of upgrading my operating system, but I presume that chances of running into problems are much less than if I were upgrading a Windows OS. In case a problem arises my entire hard drive is backed up with a 1T external hard drive using SuperDuper software, but I prefer not to encounter a situation requiring me to use it for restoration purposes.
    The key to any update or upgrade is to make sure that you have a good working back up. That way, should anything go wrong, you have a quick way back to where you started.
    My tips for upgrading the OS? Disconnect the disk with the back up and all other peripherals when you do the Upgrade. Pop the disk in. Do a standard Upgrade. (There are some folks who swear that you should wipe your HD and start over from scratch before you do, but, frankly, that's overkill. I've been upgrading Macs since 1992 and never had a problem.
    Regards
    TD

  • How to merge RAW files into iPhoto Library?

    Hi,
    I have several (Aperture-) modified photos in iPhoto. When I click on any one of those photos in iPhoto (9.5.1) and then click on File -> Reveal in Finder -> Modified File – it reveals the location of a jpg-file inside my iPhoto Library. So far, so good.
    However, when I choose File -> Reveal in Finder -> Original File it takes me to an external folder (located in my Home Picture library) and reveals the original RAW-file. I don't know why they are in a folder outside the iPhoto library but I suppose it has something to do with me editing them outside of iPhoto. And this is not a library but just a regular folder containing RAW-files.
    How can I merge all my RAW-files so that they are, neat and tidy, all inside my iPhoto library?

    However, when I choose File -> Reveal in Finder -> Original File it takes me to an external folder (located in my Home Picture library) and reveals the original RAW-file.
    You can use Aperture to move the raw originals back into the iPhoto/Aperture library, if your iPhoto and Aperture versions are still compatible.
    Open your library in Aperture and select all photos with raw originals in the Browser and use the command "File > Consolidate Originals".
    You will be prompted, if you want to move the files or to copy them. Select "Move files".
    The reason they originals are outside the library is probably caused by the way you imported them. Check your import settings in Aperture.
    In the Import panel the option "Store files" should be set to "In the Aperture Library".
    And in iPhoto the "Advanced" preference for importing should be "Copy items to the iPhoto Library"
    Regards
    Léonie

  • Importing RAW files into iPhoto'08

    I'm trying to import photo's taken in a RAW format from my Canon 550d into iPhoto'08 and all the time after trying to move the photo into an album I get an error message saying 'unable to import unreadable file'.
    could this be due to a software update needed for iPhoto'08 for the 550d which I have yet to install?
    I have noticed on occasion, a software update would come up to support other camera's when using RAW files.

    since I've downloaded the trial version of Aperture 3 I have noticed I can now import and work on RAW images taken off my 550d in iPhoto '08.
    so it seems thats a way to get it to work. although now that I'm using Aperture 3 (just the trial version for now), I do not want to go back to using iPhoto '08! lol, its a cruel world...

  • Can we import RAW photos into iphoto?

    My brother-in-law has many photos from past reunions that are in RAW format. Can we import these into iphoto and have it work? I really want the photos but he thinks it won't work.
    What are the steps? He says the file sizes are very large

    That's not enough.
    The Raw format of each camera model - not make, model - is different. So the Raw of the Nikon D40 is not the same as the Raw from a D60, which is different from the D80 and so on.
    But hey, have you tried plugging it in and seeing if it will import?
    Regards
    TD

  • Re: thought I was importing RAW files into iPhoto 09

    I've imported several hundred RAW files from my Canon T2i into iPhoto and when I went to open them in Photoshop Elements they are JPG files (new to Mac, switched from Windows).  When I select an individual photo and select show extended photo info it says it is a CR2 file and 7.9MB (a RAW file).  I've read many threads but my question is:  Has all the data from the RAW file been lost and it's now compressed into a JPG file or can I somewho get that file back to it's original RAW format with all of it's info?  And if I can, how??
    Thanks in advance for any help,
    Kristy

    No data has been lost. Your Raw files are unchanged in any way. This is a bit long but it might help explain things.
    Processing Raw in iPhoto
    When you import a Raw to iPhoto it automatically makes a jpeg Preview of the shot. Currently, this is what you re sending to Photoshop - read on.
    Why? Because you can't do anything with Raw - can't print it, share it online, use it in other apps etc. So to allow you to use the file immediately the Preview is available.
    You can, however, also process the Raw in iPhoto simply by editing it. The Raw processing engine in iPhoto the same one used in Aperture, but with less fine control. (Think of the differences between Word and TextEdit, iMovie and Final Cut). The output from the processing then replaces the preview.
    You can choose to save your output as either jpeg or tiff in the iPhoto Preferences.
    When you are processing Raw in iPhoto you will see the Raw badge on the bottom of the iPhoto Window
    Uploaded with plasq's Skitch!
    Note: After you have processed a Raw, subsequent edits to the photo are carried out on the processed jpeg (or tiff) not the Raw. If you want to go back to the original then you need to use the Photos -> Reprocess Raw command.
    Processing Raw in a 3rd Party Application
    You can also process your Raw with a 3rd Party app like ACR or Photoshop.
    But iPhoto does not handle this gracefully and it's a bit of a kludge.
    First off set your preferred app as an external editor in iPhoto:  You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway
    And the key bit for you...
    Next: In the iPhoto Preferences -> Advanced, elect to use Raw with your External editor:
    Uploaded with plasq's Skitch!
    Now when you go to edit the Raw it will be sent to your external editor.
    Now for the kludge:  You cannot save a Raw. The work you do must be output to a new file, in a new format (jepg, tiff, whatever). However, as the External Editor is making this new file iPhoto has no knowledge of its existence. Therefore you must save it to the desktop and then import it back to iPhoto as a new file.
    This means that you will have your Original Raw and the processed version in iPhoto but they will not be recognised as version and original. iPhoto will see them as two separate shots.
    Regards
    TD

  • Can't import .pdf file into iphoto

    I think the problem is that I had taped pics onto 8.5x11 paper and at copy shop they scanned into a .pdf file which has 8 pages of pics. What I want to do is find a way to drag pics off of a page into iphoto to email to family.
    Maybe this is impossible? I don't have a scanner, is why I went to copy shop.
    I can view the pages in PREVIEW and in ADOBE reader, and try to highlight pic and copy into iphoto, but it only shows a part of top of image.
    I also tried in Adobe Reader the menus: Tools/Select and zoom/snapshot and it shows "copied to clipboard" but when try to go into iphoto to paste, the PASTE word is greyed out; same if try to paste to desktop. Any ideas how to get photo's off .pdf file? TKS ahead for help!

    In preview go to print and click PDF and select send PDF to iPhoto . In iPhoto duplicate the resulting image and crop to a photo and repeat as needed
    LN

  • Import jpeg files into iPhoto library - closes iPhoto

    I scanned some images and saved them as jpeg. They will open and display fine using various applications. When I try to use File > Import from iPhoto 6, iPhoto closes without importing the file. When I reopen iPhoto, a message tells me that an image file in the library failed to import and I'm prompted to import it. Why I say yes, it again closes without importing.
    I've tried this with numerous files, always with the same result. And this also occurs if I use the drag & drop method, rather than using the imprt function.
    Any suggestions? I'm running OS X 10.3.9
    Mac Mini   Mac OS X (10.3.9)  

    Your suggestion led me to the solution, I think. Thank you.
    The original scans were VERY large (about 4 MB each) and were stored in .JP2 format (a .JPEG format updated in 2000 to reduce lossiness.) They "choked" iPhoto.
    I re-saved them in uncompressed .TIF format and also saved resized versions of under 1 MB each.
    Result: As .TIF files, iPhoto accepted both the large (as big as 6.2 MB) and the smaller (1 MB) files.
    Theory: The problem was with the .JP2 and resaved .JPG files. I think that iPhoto won't deal with .JP2 formatted images, even if they have been resaved as regular .JPGs.

  • IMPORTING NEF (RAW) IMAGES INTO iPHOTO 6 FROM NIKON D80

    I have just got my self a Nikon D80 and find that I cannon import the NEF(RAW) images into iphoto6 - the files are not recognised - if I shoot in jpeg format it is fine
    Bit of a disappointment as I was really excited to see what the ophotos would come out like! I have not imported the software that came with the camera - but I didnt think that was necessary.
    Any help gratefully received

    David
    What kind of computer do you have? What version of the OS? What version of iPhoto? Have you applied the RAW updates from http://www.apple.com/support/downloads?
    Regards
    TD

  • How can I import eex files into Applications EUL from the unix command line

    How can I import *.eex and *.dis files into an Applications EUL from the unix command line?
    Thanks

    Hi
    The simple answer is you either have to use the client tool DIS51ADM to import files using the command line (Discoverer Admin is a windows only client tool), or the Java command line which needs a browser.
    In theory if you have a browser running on your Unix box you may be able to use the Java command line to make this work.
    Best wishes
    Michael

Maybe you are looking for