Can't import .RTF into Boris Title Crawl without crashing

I laid out my titles in Word, saved as an .RTF and then when I clicked import in Boris Title Generator (crawl) and selected the .RTF file, FCP crashes.
I tried opening a new empty project and doing the title there - same problem.
I tried cutting my .RTF into two parts. Same problem.
I've spent hours tonight first trying to layout in columns and better spacing in Boris (leading command made the lines crazy after render), so finally thought to import but is crashing.
Any help very much appreciated.

What format are you working in? If it's DV, simply create a new file in photoshop using the DV preset and then adjust the vertical dimension to whatever is appropriate. Post back if you want, and I'll look at some of the crawls I've done and see what they're dimensions are.
If you want to send me your email address (my email is in my profile) I'll try and put together a small project with a end crawl or two from some recent projects, along with the photoshop files.
The trick is to create a separate sequence for the end crawl with the field dominance set to none. You animate the title crawl in this sequence and then render out a selfcontained qt and bring it in to your complete sequence.

Similar Messages

Boris title crawl missing after converting with Compressor

Not sure where to put this, since it involves two applications, FCP and Compressor.
I have my credits done as a Boris title crawl (roll). They roll up just like credits in the average movie. They're quite long, spanning almost 4 minutes. Some videos are also included in the open space during this title crawl.
When I convert the files for use with DVD Studio, I used the DVD Best quality 90 minutes presets. It performed that conversion without a hitch.
Looking at the video, everything looks great (it's interlaced, of course). No apparent problems, until the end, where the credits should be scrolling: there's nothing. The videos show up, but only one small section of the credits actually show, and it's cut-off.
I checked the credits again in FCP, and they all fit 100% within the inner title-safe overlays. I've never had any trouble with these rolling credits, except for this problem now.
Any ideas what could cause them to almost completely disappear? most of the time the screen is pure black with absolutely NO text whatsoever. Only three lines show up, and they are cut off on both sides (they extend beyond the view of the screen on both the right and the left).
Many thanks to whoever can assist me.

So you're saying I should just export one as a test? Or, what I was thinking is, export the title crawl as a self-contained movie, then import it back into FCP and then send it to Compressor; can't mess it up like it does if it's a strait-up video, right?
Still can't figure out why Compressor would mess it up like that though. Looks perfect when I export the whole movie as a self-contained movie, which I already did twice. I then burned a sample DVD Using iDVD as a test to see how my video looked on the TV screen. Everything was perfect, except a small amount of flickering in some text (but it wasn't enough to bother me).
Yet, sending it to Compressor completely destroys the title crawl, leaving the intermixed videos untouched. Just plain weird...

Perplexing Problem with Boris Title Crawl

This has been an ongoing problem that occurs whenever I use Boris Title Crawl to create very simple titles (i.e lower third, scolling titles, etc). Within the HD sequence, the titles work as intended, but when I down convert the sequence or export the sequence containing the titles to a QT file (whether via QT conversion or compressor) this is where I get the problems. Titles which were once centered become right justified or visa versa. It doesn't occur with all of the titles and there seems to be no recognizable pattern. Sometimes the title will flip back and forth between centered and justified. Sometimes I go back into the sequence and re-edit the title. This may solve it, but then another title will be effected. This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.

*This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
rh

Applying Boris Title Crawl

Hello,
I'm having a heck of a time getting the scrolling title/credits, that I finally figured out to do in Boris, but am missing a step that's not putting it into the timeline. To start, I clicked on the title icon in the lower right-hand side of the viewer, the chose Boris, Title Crawl, then typed up all my credits. Then it took me to the Controls tab, and then from there, I'm just not getting what's next. Like w/'regular' titles, afterwards, I clicked on the Video Tab, but, nothing was showing up. I also dragged in the blank empty 'box' from the Video Tab, and on the timeline, it is labeled as 'Title Crawl', but again, nothing. Can someone please help, and let me know the step I'm missing? Thank you!

Hey there,
That's what I thought, that when I set everything up, animation/roll, and switch to my video tab in the Viewer - there's nothing there, even when I scrub back and forth bewteen my in and my outpoint, I do not see my text scrolling up and down. I dragged it into my timeline, scrolled through it, but didn't render it - could that be the issue? I didn't render 'cause I didn't see anything there TO render. And, I thought I would have seen it in the Viewer window. Maybe I'll try rendering, and see what happens...
I did originally try it in the FCP scrolling text generator, and yes, all of the scrolling text is there. But the reason I want to put it into Boris is because it's still 'wavy', despite putting on a de-interlacer, and fixing the whiteness, etc...
I haven't tried the Boris Title 3D tool - only Crawl. Thanks!

Creating Gutter with Boris Title Crawl

Hello all!
I'm doing the end credits for a DV project and as we all know Boris is better than Final Cut's text generators. Just wondering if there's a feature in Boris a la the * in FCP's Scrolling Text generator. You know, to line up those gaps. I've fidgeted and can't find it.
Michael

*This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
rh

Boris Title Crawl Stop at last line

I have the Boris Title Crawl that comes with FCP version 6. I have a "Credits" list at the end of the video with my company at the last line.
TC continues (while the music is playing) until the last line scrolls off of the screen (I am using "Roll")
I cant figure out how to make it stop rolling when the last line is at the middle of the screen.
Any help would be appreciated

Hi -
Use the Percent Completion Slider. It is at the bottom of the Controls tab for your Title Crawl/Roll clip. You might need to scroll the controls window down to see it, It is near the bottom of the Controls pane.
Start your roll by placing a keyframe with 0 Percent Complete, then move your playhead to where you want the roll to stop and make another keyframe. Adjust the slider till the line of type is in the position you want. The Roll will stop there. If you control-click on the second keyframe, you can spline the motion so that the roll will smoothly come to a stop.
!http://www.spotsbeforeyoureyes.com/BorisRollPercentComplete.jpg!
Hope this helps.

Titles created in Boris title crawl disappear after render

I build a title roll in Boris Title Crawl for a weekly TV show that I edit in HDV 1080i60 (that is how I get the footage) that airs on Dish Network and DirecTV. I build the end credits in Boris Title Crawl using the "Roll" animation style. The roll will appear in the perfect position on the screen. However, sometimes over time and subsequent rendering, the titles will disappear completely from the screen, and I believe they are being positioned far off to the side outside of the viewable area. The wireframe for the roll remains in the correct position, it just appears empty. If I re-open Boris Title Crawl and then click "apply" again, the mispositioning is corrected, at least for a while. If I try to export using quicktime conversion to another format (Quicktime Movie with H.264 compression), the roll might disappear again, and the movie will export without the roll. This has only been happening since upgrading to FCP 7, I don't recall it every happening with FCP 6. Any ideas would be greatly appreciated.

I don't use Boris regularly, but when I have, I never encountered this, and I doubt it's related to upgrading to 7. If I understand correctly what you're describing, the changes could be caused by any number of things – like whatever cutting took place on your TL "over time and subsequent rendering" causing re-renders.
How many v tracks do you have and is the crawl on a separate track? Consider exporting the credits clip as a QT movie and reimport it.
And somewhat off topic, typically I get better (and far more predictable) results by exporting my sequence as a QTMovie (current settings) and do all encoding (e.g., H.264) in Compressor.
Good luck.
Russ

I can not import photos into lightroom 4.4 Had no problem before this time.

I can not import photos into lightroom 4.4 Had no problem before this time. I have camera raw7.4 and use a NikonD7100. I have a Mac using 10.6.8. I can see the images and selected for import in Lightroom, but after I check "import" I get a message that Lightroom could not read the files. This happens with both raw and jpeg files. Thanks for a repl

thanks for the reply. would you please tell me how to check for the folder to have write permission. I have done the same settings as before but this time does not transfer. It says can not read files with a code "298". I can see the thumbnails on the screen prior to trying to import the photos, also can see them with the card in the camera and using the view mode. I have up to date camera raw 7.4 for my Nikon D7100 and the settings allow for 7.1 and above

How can I import video into iMovie from a DVD?

How can I import video into iMovie from a DVD?
Thanks,
Doug Davis

You can do this with a free app called MPEG Streamclip and a $20 quicktime component from Apple.
See detailed instructions here.
https://discussions.apple.com/docs/DOC-3951

How can I import music into iTunes from other media .I have music which was downloaded from my Sony Ericcson W715 into "Media Go" and I want to transfer it into iTunes.Is this possible ?

How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
<Email Edited by Host>

chrisfromgoodworth clatford wrote:
How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
Possibly. Media Go supports a variety of music formats, some of which can be imported in to iTunes and then synced on to an iPhone, however some of its formats cannot be imported in to iTunes.
See http://mediago.sony.com/enu/supported-file-formats/ for a list of formats supported by Media Go. iTunes for Windows supports MP3, AAC, WAV, and can import and convert WMA files as well. However iTunes does not support ATRAC, or FLAC.
Furthermore, if some of your music has been bought from an Internet music store it might be procted by DRM. If so it cannot be imported in to iTunes.
To do the importing you would either drag the music files in to iTunes, or tell iTunes to open them. See http://support.apple.com/kb/ht1347

Boris Title Crawl

Hi all,
did some looking around and couldn't find anything this specific.
I am able to get the "Text window" when using the Boris Title 3D. But when I go to use the Boris Title Crawl and click on the "banner" for the Text window, nothing happens. I do get a new menu for Title Crawl but no real working options. I am not able to use it at all.
Has anyone else seen this problem?
Thanks!
--Tim

Could it be a corrupt font?
To validate fonts:
Open Font Book and select one or more installed fonts to check.
Choose File > Validate Font.
In the Font Validation window, review the fonts listed for warnings or errors. Use the pop-up menu to display warnings and errors separately, if necessary.
For fonts with warnings or errors, click the disclosure triangle next to the font to see which validation rules show errors.
To remove a corrupted font, click the checkbox next to the font. Make sure fonts you want to keep are not checked. Then click the Remove Checked button.
Dual 1Ghz G4 Quicksilver Mac OS X (10.4.7)

Boris Title Crawl question

I am using the title crawl but would like to hold he last line on the screen.
does anyone know how to set the parameters to hold? i fiddled around with the motion tab but nothing i am doing is changing anything. the credits are rolling from beginning to end. Anyway to stop it in the middle? thanks.

FWIW, I create a file in photoshop and then simply use the motion tab in fcp to define the motion or do the whole magilla in After EFfects. Taking a quick look at the Boris title crawl, I don't see any obvious way to do this, however, you could freeze the appropriate frame and put the freeze on a higher video track at the appropriate point in the timeline. Not sure if the "stop" would be smooth enough. Maybe there's something in the boris interface I'm missing.

Getting Smooth Text with Boris Title Crawl (Scroll)

Hi, using FCP 5 (Studio) with Boris Title Crawl generator.
It seems to work pretty well, does what it should, renders relatively fast, all that. The only problem is the upward scrolling motion is a little jumpy. Just wondering what things I should be tweaking or some general strategy for getting a smooth text scroll.
The timeline is 10-Bit uncompressed NTSC so there aren't DV text issues here (or so I'd think). I'm trying different fonts, bold and sans-serif. It looks OK, but not broadcast (DVD actually) ready.
Thanks everybody, much appreciated.
Jason

Thanks Jim, makes sense.
To adjust speed, do you mean basically slightly change the length of the clip? I don't see any other place to alter that.
Thanks,
Jason

I took a 15 minute video clip on my phone and now I can't import it into iphoto. I've been able to import clips to iphoto in the past. How do I fix this? How can I get it imported onto my MacBook and ultimately iMovie?

I took a 15 minute video clip on my phone and now I can't import it into iphoto. I've been able to import clips to iphoto in the past. How do I fix this? How can I get it imported onto my MacBook and ultimately iMovie?

Maybe try one of the WiFi transfer Apps? There are several to choose from. I use Photosynch quite often to send photos and videos between my computer(s), my iPhone, and iPad.

How can I import pics with the title info?

How can I import pics with the title info? Title info not importing, just the pics with original title info

jfromcal wrote:
the info is on the pics on the cd I'm importing to my iphoto library. I maybe using the wrong terminology. Basically naming or writing a description underneath for each individual photo.
js
exactly where is it - the file name? in the IPTC data? Actually "on the photo"?
LN

Can't import .RTF into Boris Title Crawl without crashing

Similar Messages

Maybe you are looking for