Can't import .RW2 into LR5

Keep saying preview unavailable when importing .RW2 off of a Panasonic GH4 into LR5. Have tried DNG Converter 8.4 and it doesn't recognize it either?

RAWs from Panasonic GH4 is not supported by Adobe Software at this time. Most likely it will be when the next version of software updates is released.
For now, you have to use Panasonic software to read the photo, convert it to TIF, and then import it into Lightroom.

Similar Messages

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.

I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days.

I can not import photos into lightroom 4.4 Had no problem before this time.

I can not import photos into lightroom 4.4 Had no problem before this time. I have camera raw7.4 and use a NikonD7100. I have a Mac using 10.6.8. I can see the images and selected for import in Lightroom, but after I check "import" I get a message that Lightroom could not read the files. This happens with both raw and jpeg files. Thanks for a repl

thanks for the reply. would you please tell me how to check for the folder to have write permission. I have done the same settings as before but this time does not transfer. It says can not read files with a code "298". I can see the thumbnails on the screen prior to trying to import the photos, also can see them with the card in the camera and using the view mode. I have up to date camera raw 7.4 for my Nikon D7100 and the settings allow for 7.1 and above

How can I import video into iMovie from a DVD?

How can I import video into iMovie from a DVD?
Thanks,
Doug Davis

You can do this with a free app called MPEG Streamclip and a $20 quicktime component from Apple.
See detailed instructions here.
https://discussions.apple.com/docs/DOC-3951

How can I import music into iTunes from other media .I have music which was downloaded from my Sony Ericcson W715 into "Media Go" and I want to transfer it into iTunes.Is this possible ?

How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
<Email Edited by Host>

chrisfromgoodworth clatford wrote:
How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
Possibly. Media Go supports a variety of music formats, some of which can be imported in to iTunes and then synced on to an iPhone, however some of its formats cannot be imported in to iTunes.
See http://mediago.sony.com/enu/supported-file-formats/ for a list of formats supported by Media Go. iTunes for Windows supports MP3, AAC, WAV, and can import and convert WMA files as well. However iTunes does not support ATRAC, or FLAC.
Furthermore, if some of your music has been bought from an Internet music store it might be procted by DRM. If so it cannot be imported in to iTunes.
To do the importing you would either drag the music files in to iTunes, or tell iTunes to open them. See http://support.apple.com/kb/ht1347

I took a 15 minute video clip on my phone and now I can't import it into iphoto. I've been able to import clips to iphoto in the past. How do I fix this? How can I get it imported onto my MacBook and ultimately iMovie?

I took a 15 minute video clip on my phone and now I can't import it into iphoto. I've been able to import clips to iphoto in the past. How do I fix this? How can I get it imported onto my MacBook and ultimately iMovie?

Maybe try one of the WiFi transfer Apps? There are several to choose from. I use Photosynch quite often to send photos and videos between my computer(s), my iPhone, and iPad.

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac

Have updated to yosemite and now can't import tiffs into illustrator

Have updated to yosemite and now can't import tiffs into illustrator. Help!

sued,
It is known that there are CS4/Yosemite issues.
For your issue, you may try to save your TIFF as a Photoshop .eps file and import that.
Or a rollback to Mavericks.

Can't import loops into LPX that import fine into Logic 9

Hi all,
I'm new to posting to the forum but have learned a great deal from browsing it over the last few years. I've got a question that I've scanned the forum for but can't seem to find an answer to. My problem is this: I've got loops that will import fine into the loop library in Logic 9 but absolutely will not show up in Logic Pro X (10.0.4). I'm running OSX 10.6.8 on a late 2013 MBP (15", 16GB RAM, 512SSD).
These are loop collections that I've purchased from a couple of different reputable companies. Some are in .wav format, others .aiff. I've tried reindexing the loop library, editing the loops individually and as a group in ALU to make sure that they're listed as loops and have the proper collection and naming parameters (all do), etc... Nothing seems to be working. I just drag and drop the folder in LP9 and it works great, but when I try to do the same in LPX, nothing happens.
I'm running my loops through an external harddrive (with an alias on a local folder pointing to the external hard drive), but even when I try to store loops locally it doesn't make a difference.
Does anyone have any ideas/tips? Has anyone else heard of anything like this? For what it's worth, I have just shy of 40,000 loops in LPX (and nearly 50,000 in LP9)... not sure if there's a limit, but it wouldn't make sense that a previous version would allow more loops.
Any advice would be greatly appreciated. Thanks!

Logic Pro X is not compatible with 10.6.8 so how did you download/install it?
LPX requires a minimum of 10.8.4 to download/install correctly.....
This may be the cause of your issue......

How can I import pictures into an existing event?

I am loading up my new MAC with various photos on CDs and would like to be able to import them into specific existing events, instead of creating a new event and dragging it to merge with another. How can I do this? If not, is there an easy way to merge events without dragging from one end of the list to another - hard when you have a couple of hundred events.

You can't. All import will go into a new event. Then you can drag that event onto the Event you want to put the photos in and that will merge the two.
OT

I can't import files into the new iTunes 11. Why?

Since downloading the new iTunes 11, required for the new iOS 7, I can no longer import files into my iTunes library.
When dragging and dropping the files, nothing happens.
When importing them via the iTunes menu. Nothing happens.
I've tried adding them to the iTunes folder "automatically add to iTunes library". Nothing happened.
I've had the new iTunes for one day, and it doesn't work.
Can somebody please help me?!

Sorted. Sorry.
The files did not have album name / artist name etc... etc.... Had to find them and type them manually.

Premeire Elements 13 - can't import files into Project Assets, Expert Mode. Win8.1

Hello there - I've tried uninstalling/reinstalling. Can't seem to figure this out. In other computers, I have imported files into the Project Assets area to "pre-edit" before adding to timeline. I can add media directly to timeline in Quick Mode, but it's too cumbersome. Really need ability to select segments of media in the Project Assets list.
Any help greatly appreciated as I spent a ton of $$ on a new computer and program!!
Thanks folks!

krauss bicycles
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
What is the typical outcome...
a. Expert workspace open....Add Media/Files and Folders/and no import into Expert workspace Project Assets, but you do find the import switching to Quick workspace Filmstrip?
b. Quick workspace open....Add Media/Files and Folders and media goes directly to Filmstrip. And, if you switch to Expert workspace, you find copy of import in Project Assets?
c. Other
Please delete the Adobe Premiere Elements Prefs file.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
13.0
and in the 13.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 13.0 Folder in which the
Adobe Premiere Elements Prefs file exist. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see
the whole path described.
If that does not work, then do the uninstall, free ccleaner run through (regular and registry parts), and reinstall with antivirus and firewall(s) disabled.
Download and install the 13.1 Update using an opened project's Help Menu/Updates.
We will be watching for your progress.
Thank you.
ATR

Can't import photos into Aperture

Prior to upgrading I was using Aperture 2, I exported each project individually into folders - I decided to keep my photo organized by folders (and referenced) rather than in the Aperture library.
I upgraded to Aperture 3.0.1.
I can't import anything - either individually or by folder. Individually, I select import then navigate to the folder I'd like to import but I can't see any images in it, Aperture says 'loading assets' (I've left it there for hours). If I choose to import by folder, I can navigate to the folder, I see the image files but they are greyed out. I can click on import, but nothing happens.
If I navigate to the folder in Finder, drag and drop it onto Projects in Aperture I see the green plus sign. I let go and nothing happens. Images are both RAW and JPEG.

Prior to upgrading I was using Aperture 2, I exported each project individually into folders - I decided to keep my photo organized by folders (and referenced) rather than in the Aperture library.
I upgraded to Aperture 3.0.1.
I can't import anything - either individually or by folder. Individually, I select import then navigate to the folder I'd like to import but I can't see any images in it, Aperture says 'loading assets' (I've left it there for hours). If I choose to import by folder, I can navigate to the folder, I see the image files but they are greyed out. I can click on import, but nothing happens.
If I navigate to the folder in Finder, drag and drop it onto Projects in Aperture I see the green plus sign. I let go and nothing happens. Images are both RAW and JPEG.

Can't import photos into iPhoto

I have a Sony DSC W5 digital camera. For five years I have been able to import photos from the Sony camera into iPhoto. In the last two days I can no longer import photos into iPhoto. I get an "unrecognizable file" prompt. I can drag the photo files onto the Finder and view them there. The photo on the Finder has a .jpg suffix just as all the other photos in iPhoto. Anybody got an idea on how to solve this problem? Thank you.

get the photos off of the card and reformat the card using the camera format command
Can you import the photos from disk once you have moved them from the camera to the disk? If not try opening one preview and saving as to create a new file and import that
LN

Can't import MP4s into iMove '08

I recorded some videos on my Nokia N95 and wanted to put them into iMovie and export them onto YouTube after some editing, but iMovie won't import my MP4s! Are there any free and painless ways to convert MP4s into more compatible formats for use with iMovie '08?
Any help greatly appreciated!

Oh sorry!! It turns out that when you import movies into iPhoto '08, when you export them they come out as images, instead of movies; how strange!! :S You can view movies in iPhoto but you can't get them out of there, thanks for your help anyways , you can drag and drop movies from iPhoto into iMovie so I'm all sorted now.

Can't import .RW2 into LR5

Similar Messages

Maybe you are looking for