Can't import the exercise zip files

I downloaded the exercise zip files and tried to import them to flex 3.
I can browse to the zip but flex will not let me finish.

Not sure what you are saying.
Downlaoded the exercises to my HD. Created a folder "Flex in a week" and tried to import the exercises.
Same problem wirh some books. Download the source code as a large zip. unzip the file and try to import projeect folder or project zip and can't.
Must be operator error software can't be that hard
Herman

Similar Messages

How can I import the vlan.dat file to flash?

I have copied the config and vlan.dat files via tftp to the computer and want to import them to a replacement switch. Both switches are 2960 model. I get the config over fine but not sure how to get the vlan.dat file to the flash.

Hi Jerry,
Please try below command.
copy tftp://x.x.x.x/vlan.dat flash:
Where x,x,x,x is the tftp ip address.
Hope this helps.
Regards
Najaf
Please rate when applicable or helpful !!!

Where Can I Find the classes.zip File?

I am looking for the JDBC driver for the Oracle database. I have been to the http://www.oracle.com to look for the classes12.zip and could not find it. Has the name of the zip file changed for Oracle JDBC 10.1.0?

There are two parts: the java version and the database version.
This would normally be: classes11.zip, classes12.zip and ojdbc14.jar.
You should probably be using the last. The first two would be for earlier versions of the database and java.
If you install the Oracle client it should have it (look for a jdbc dir.)
There is some place to download it from the otn site as well.

I only have the exported .zip file for a project, can I import to captivate and make a .cptx source file?

I am working on a multi-person team with Captivate 7. The CPTX source file cannot be located for one module. We have the exported .zip files in our Version Control system. Can I take these files and recreate the .cptx file. I don't mind having to recreate a little functionality, but am hoping to avoid starting from the beginning with this file.
I know this can be done for RoboHelp files, was hoping some script existed for Captivate as well.

You might be able to save a bit of headache by extracting the content of the zip. Likely a SWF will be inside along with other files. You could then play the SWF and capture the screens. Might save a tiny bit of effort.
Cheers... Rick

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

Electronic Press Kit.
Usually in the form of video outtakes, movie trailers, cast and crew interviews. Basically, the stuff that gets bunged onto commercial DVDs as extras or ends up on late night TV "Making Of..." shows.
To answer the OP, you want a button on the menu that leads to a still image, or series of them, set up as a slide show. You can copy/paste the text in DVD Studio and then add formatting via the Text menu. (Highlight the text and right click to access formatting controls). Or do it in a graphics application using the appropriate video image preset.

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

Can I import and open raw files on the new photo app?

Hi,
Can I import and open raw files on the new photos app on my ipad? Does it convert it to jpeg automatically when you want to share them?
Thanks.

Clem is telling you to click on the View menu, move the pointer down to the item "Metadata," & from its choices make sure "Show Titles" is selected. Do this, then make sure you are in a view in the main window that shows one or more videos (or whatever) that you want to title. Click once on one of them, & if the separate Info window is not open, open that (on the Windows menu or command + i as a keyboard shortcut). In the Info window the top line will be "Add a Title."
Click once on that & type your title.
This works for any item, video or photo.

I can't import the RAW files from my Nikon D800.

I can't import the RAW files from my Nikon D800.

Go to the editor on the menu click:
Help >> Updates…
Install Camera Raw 6.7 if you have PSE10.

From where can be the WebCenterSRDemo.zip file downloaded ?

Hi,
Oracle® WebCenter Framework Developer's Guide
"2.3.2 Setting Up the Oracle ADF Service Request Demo
To view the SRDemo and perform some of the example tasks in this guide, you must download and install the starter files. To do so, perform the following steps:
Download the WebCenterSRDemo.zip file, located on this page:
http://www.oracle.com/technology/products/webcenter/documentation.html
This is not the right link and the WebCenterSRDemo is not available via JDeveloper "Check for Updates Wizard".
Please, inform me of its location, if existing...
Regards
Boris

Thank you Peter,
can you inform us also about the integration with the Oracle SOA Suite :
3.3 Enabling Oracle SOA Suite or a Standalone OC4J for WebCenter Applications
" If you have Oracle SOA Suite 10.1.3.1.0 or a standalone OC4J 10.1.3.1.0, then you can update it to create, deploy, and run Oracle WebCenter Suite 10.1.3.2.0 applications. Patches to enable you to run WebCenter applications will be released in the future. Watch for more information about MetaLink and the Oracle Technology Network:
http://www.oracle.com/technology/products/webcenter/index.html..."
What I'm missing in the WebCenter Suite is a tool for Business Process Modelling , like Business Process Architect (ARIS ToolSet)...
Regards
Boris

I can't import the .MOV file .how to i use it??

i can't import the .MOV file .how to i use it??

You might need to tell us a bit more about your problem. Do you mean you can't import a video file into Premiere, or your computer is having trouble playing Quicktime files?

HT4101 can the ipad lightning connector export to an sd card, and if so, can I import the files on the sd card to my pc

I want to buy an Ipad mini but having had a bad experience with a Galaxy I want to be sure I can use it. My first concern is downloading photos and files from the Ipad to my win computer. Can I use the ipad lighthing connector for an sd card to export as well as import these files. next is the camera. I couldn't read bar codes with the Galaxy as it would not focus up close. Will the ipad Mini?

The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
There's also some apps that will transfer via wifi. Using these apps may be the easiest way of transferring your Photos and Videos to your computer and other iOS devices.
Simple Photo & Video Transfer
https://itunes.apple.com/us/app/simple-photo-video-transfer/id420821506?mt=8
Simple Transfer App
https://itunes.apple.com/us/app/simple-transfer/id411292121?mt=8
Easy Media Transfer : Useful App for Wireless Transfer
http://apps400.com/iphone-apps/easy-media-transfer-useful-app-for-wireless-trans fer.html
Photo Transfer
http://www.phototransferapp.com/
Copy Photos (& Videos) Between iOS Devices
http://tinyurl.com/cnz95bc
 Cheers, Tom

Import a GarageBand zip file

On iPad Safari I downloaded a GarageBand project zip. How do I import it into GarageBand? Thanks.

<i>> if your intention is to upload a PAR file directly to
> portal(not from the NWDS ), you can use the above
> method,
> Sys Admin->Import PAR
>
> if you have a copy of the PAR file and you want to
> make some changes to it and then uploading it.....if
> that is what you are looking for.....then you may do
> the changes by importing the original PAR file you
> downloaded from the Portal to the studio and then
> make the necessary changes for example, the look and
> feel changes int the respective JSP files then deploy
> it with a different name to the Portal
> then create an iView out of this PAR put this in the
> same page, where the default iView was .
> make your new iView visible and the old one
> invisible.
> that is all.</i>
Thanks Steelman, this is exactly what I am looking for. But the application I want to change is a standard one so I can not import it in NWSD and then deploy it... With the .PAR downloaded I am going to change directly the JSP page and then to uploade the new PAR file in the portal (without NWDS). For this is it obligatory to create a new iview or could I change the .PAR of the existing Iview?
Regards,
Jerome.

How can we give the Data Format (File Type ) in Runtime

Hi all,
How can we give the Data Format (File Type ) in Runtime for the following method,
cl_gui_frontend_services=>gui_download.
Thanks in advance
Sri

There is a filetype parameter which you can set
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
*    BIN_FILESIZE              =
    filename                  =
*    FILETYPE                  = 'ASC'
*    APPEND                    = SPACE
*    WRITE_FIELD_SEPARATOR     = SPACE
*    HEADER                    = '00'
*    TRUNC_TRAILING_BLANKS     = SPACE
*    WRITE_LF                  = 'X'
*    COL_SELECT                = SPACE
*    COL_SELECT_MASK           = SPACE
*    DAT_MODE                  = SPACE
*    CONFIRM_OVERWRITE         = SPACE
*    NO_AUTH_CHECK             = SPACE
*    CODEPAGE                  = SPACE
*    IGNORE_CERR               = ABAP_TRUE
*    REPLACEMENT               = '#'
*    WRITE_BOM                 = SPACE
*    TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
*    FILELENGTH                =
changing
    data_tab                  =
* EXCEPTIONS
*    FILE_WRITE_ERROR          = 1
*    NO_BATCH                  = 2
*    GUI_REFUSE_FILETRANSFER   = 3
*    INVALID_TYPE              = 4
*    NO_AUTHORITY              = 5
*    UNKNOWN_ERROR             = 6
*    HEADER_NOT_ALLOWED        = 7
*    SEPARATOR_NOT_ALLOWED     = 8
*    FILESIZE_NOT_ALLOWED      = 9
*    HEADER_TOO_LONG           = 10
*    DP_ERROR_CREATE           = 11
*    DP_ERROR_SEND             = 12
*    DP_ERROR_WRITE            = 13
*    UNKNOWN_DP_ERROR          = 14
*    ACCESS_DENIED             = 15
*    DP_OUT_OF_MEMORY          = 16
*    DISK_FULL                 = 17
*    DP_TIMEOUT                = 18
*    FILE_NOT_FOUND            = 19
*    DATAPROVIDER_EXCEPTION    = 20
*    CONTROL_FLUSH_ERROR       = 21
*    NOT_SUPPORTED_BY_GUI      = 22
*    ERROR_NO_GUI              = 23
*    others                    = 24

I am trying to import BPM Project.zip file into Oracle enterpriserepository

I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
I am getting the following exception. please help if any one know the solution.
Performing import...
Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
     at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
     at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
     at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
     at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
Audit results stored in:
C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
Thanks in Advance.

Hi
Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
They are something that need to be deployed from the process admin on BPM.
There would be the .exp file you would need as its BPM 10g that you would need to use.

Can't import the exercise zip files

Similar Messages

Maybe you are looking for