Can't import .txt keyword file into Aperture! Help!

I have a .txt file that we are using on site at a shoot. But, Aperture will NOT import this file into the keywords when using "import". I've tried copying and pasting, importing, everything. Any help on accomplishing this would be greatly appreciated!

I'm having the same issue on iPhone 3GS.
I have a bunch of images in Camera Roll which are no longer automatically importing into iPhoto.
Hmm.

Similar Messages

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

How can i import an excel file into formscentral?

how can i import an excel file into formscentral?

Thanks for asking. This is not something we currently support but you can add or vote on feature ideas:
http://forums.adobe.com/community/formscentral?view=idea
If you need to add a new idea click "Create an idea" under "Actions" in the top right.
Perry

Can I import a *.mov file into iPhoto?

Can I import a *.mov file into iPhoto? If so, how?

Yes. Open iPhoto:
File > Import to Library... > select the .move file > Import

How can I import a pdf file into numbers so it will open with a click

How can I import a pdf file into a spreadsheet so that it will open with a click?

You can link to a webpage or an email in Numbers-- that's it.
The best way I found to do this is to enable websharing on your machine (see this article if you are running 10.8: http://lowendmac.com/crews/12lc/web-sharing-mountain-lion.html)
You can then place your pdf files in the folder /Users/<your user name>/Sites/<somefolder>
Then link to this using the url "<your machine name>.local/~<your user name>/<somefolder>/<pdf Name>
My machines name is "Proton" (you can get this from the System Preferences > Sharing pane)
My user name is "wayne"
so I stored a pdf file (DM00027543.pdf) in the folder "/User/wayne/Sites/PDFTest"
and stored the URL "http://proton.local/~wayne/PDFTest/DM00027543.pdf" in the "URL" field of the Hyperlink inspector

Can't import an iPhoto library into Aperture

I'm using Aperture 1.5.2 and iPhoto 6.0.6 and cannot get Aperture to import my iPhoto library. I am following the procedure in the Aperture User Manual (p. 112) but it doesn't work. I don't get a beach-ball cursor or anything... no images, no disk activity, etc. This is regardless of the “Store Files:” or “Version Names:” or other settings in the dialog box.
I saw the Apple Support doc entitled “Aperture can't import iPhoto Library from iPhoto 6.0.1 or 6.0.2” which promises a fix in Aperture 1.1. Is this still the same problem? Or is it a different problem?
I know I can drag the photos from iPhoto into Aperture, but keywords are not preserved. Any suggestions?
PowerBook Al 15 Mac OS X (10.4.9)

I recently started using Aperture 1.5.2 and imported my iPhoto Library from iPhoto 6.0.6, so it's not an impossible task. I also had a lot of trouble with it. I can say it was a pain and there were several false starts and once it froze half-way through importing them. I did File -> Import... -> iPhoto Library and I left the files in their current location... but you said this was regardless of settings. I swear the thing just sat their for a good 20 minutes after I told it to import, although I can't recall if there was a spinning cursor or not. I'd get occasional errors about being unable to connect to server at the beginning (after it sat there for 20 minutes) and middle of the process. I just kept hitting Okay and if I had all other applications closed, Aperature finally did it. So... I guess that all amounts to: "I had problems, too, but after several tries it worked so maybe just keep trying and let it sit for awhile if no one else has a more helpful suggestion." Good luck!

I can't import my iTunes files into pages, how can i fix the privileges problem?

when i try to import any mp3 file into a pages document, i get an access privileges error saying it is either corrupt, damaged or "can't be used" because I don't have access privileges. This has happened since I moved my iTunes library to an external drive. Anyone have any solutions? The privileges on both the library folder, and all its files are set to read and write for sharing and permissions.

If you do not have done so, set the "Ignore Ownership" flag on the external drive. YOu can set this flag from the "File > Get Info" panel for the drive.
How is your external drive formatted?
Can other applications open these mp3 files? QuickTime? Do they play in the Finder preview?
Do the filenames contain special charcters?
Léonie

How can I import a .AVI file into my project?

I want to import a .AVI file into my video project but Final Cut Pro will not import it. Final Cut says the file is not recognized but it plays with Quicktime.

Jamison S wrote:
DJ OZA,
Do you get the warning "Media files are not optimized for FCP. Either recapture the media or use Media Manager to crate new copies of the files to improve performance for multi-stream playback."?
What does this mean?
I can import and edit the files no problem either, except for that waring, which concerns me.
It means you will not be able to use the multiclip feature with these files because your Macintosh is working very hard to decode them on the fly. More than one stream will choke your machine.
Your AVIs are visible in FCP because you happen to have acquired an AVI file that uses a codec you have available on your machine.
AVI isn't even supported by Microsoft; it's been a totally concatenated delivery wrapper for more than a decade. It only survives because of entrenchment.
Use Get INfo on one of your AVI clips, figure out what codec was used, use Google to find out what you can about the codec, and decide how you want to proceed. You want to determine what your output is going to be and work backwards from that decision. For instance, if you're going to distribute a standard MPEG2 DVD, you want to edit using conventional DV. Transcode you AVI files to DV using Compressor.
Your easiest solution will be to edit on a PC that does handles the AVI natively or to contact whoever gae you the files and demand they provide you with clips you can edit on a Macintosh.
bogiesan
Message was edited by: David Bogie Chq-1

Can,t import mp3 music files into Lightroom 5 slideshow says it a invalid format,can you give me some guidance please

Until I updated lightroom to 5.6 I had no problem with importing mp3 music files into slideshow but since then it informs me it is not a valid format.
This is very frustrating as have made many slideshow of Weddings,Christenings etc & have been really pleased with the result & so have my customers.
Can any of you guys assist me with this problem
Dave

I have the same problem, i have also contact by the telefone but they have no solution
Jean - Pierre

How can I Import *.Mov video files into LightRoom 5.3 ?

I am having trouble trying to Import *.Mov video files into LightRoom 5.3. It imports preview thumbnails but when I select 'Import ' it now stops and displays an error message.

Why do you ask about Lightroom issues on a Photoshop Forum?

Can I import Mac alias files into Premiere Pro CC?

I am trying to keep my folder structure clean and organized, and am using alias files to gather miscellaneous B-roll video files into a new project folder without removing them from their permenant location and without creating duplicates. Alias files on a mac are basically shortcuts to the original file. FCP 7 and FCP X will import these alias files with no problems, but when I try to import them into Premiere Pro, it says they are unsupported file types. Is there any way to make this work?

Thanks, I was prepared to hear that I would have to make a copy. One note though, is that when i import the alias file into a Final Cut Pro project, it automatically links to the original permanent file location, so if the alias gets deleted, it doesn't matter becuase it is linked to the original.
To answer your question, though, the idea for using alias files is to keep the server clean, so that multiple video editors don't keep copying the same files multiple times into their project folders when they start a new project, and then no one goes back and cleans it up, so you end up with Terabytes of duplicate files on the server. I guess the other option is to train everyone to hunt for the original files themselves and import from that location instead of their own project folders.

I can't import from my iPhone into Aperture anymore

Since upgrading last night to 10.10.3 and running the new Photos app, I'm unable to import from my iPhone into Aperture. My iPhone does not show up in the Import pane. Anybody else seeing this? or am I missing something?

I agree that Apple screwed Aperture users. I don't understand why. Over the last few years, Apple has dumbed down some applications which makes those apps much less useful. Then they slowly start adding some functions back in for a couple of years then nothing. Look at Pages. It still is missing features that the old pages had.
Apple should have simply given Aperture to everybody and maybe implemented a Simple User function for those people that don't need professional features. Here was an app ready to go and what does Apple do? Get rid of Aperture to come up with a "toy" replacement, as somebody on these discussion boards mentioned. I'm very disappointed in Apple and the direction that some of these apps are taking. I used to enthusiastically push Apple products to everybody but now I mind my own business. It's a sad state of affairs. The whole quality has gone down. All this reminds me of Apple before Steve Jobs took over. Somebody needs to crack the whip over there and focus on quality and useful apps AND listen to the users.

Importing XMP sidecar files into Aperture 3

I don't seem to see the effects of importing the XMP files with a referenced or managed RAW file. I tested this by opening a RAW file from Bridge into Camera RAW. I then adjusted the file, which created the XMP file. When I import the file into AP3, I see the master RAW image, but none of the adjustments. (I can tell this since I did a dramatic halftone to the original RAW). I expected to see the results of the halftone in my AP3 file, but did not.
Am I missing something here?

The XMP import capability is limited to metadata/IPTC type info - NOT ACR adjustments and such - those values are specific and make no sense to Aperture. This is true in reverse as well - ACR/Bridge/LR/NX2, etc, etc may pickup IPTC type metadata from XMP or embedded values but NO software will translate adjustment values from another piece of software that are stored ad metadata.
RB

Problems importing iPhoto 06 files into Aperture 2.1

I have iphoto 06 on a 2006 Mac Book Pro with OS X 10.4.11. I've upgraded RAM to 2Gb and have recently installed Aperture 2.0 with the upgrade to Aperture 2.1.
I'm trying to drag individual RAW (12Mb) files from iPhoto 06 into Aperture 2.1 via the File > show iPhoto Browser command. Unfortunately, Aperture just seems to hang at this stage. The program appears to be importing (little wheels spinning etc) however, nothing happens. I usually loose patience at the 20-min stage and force quit. I figure even with 2Gb of RAM it should not take +20-min to transfer one 12Mb file. Please note i've tried dragging the files in as both Masters and Referenced Masters and it makes no difference Aperture still seems to hang.
Any advice?
Thx,

Aperture, actually OS X, goes by camera make and model not by file. The reason being that RAW files from the same manufacturer with the same file extension but from different camera models can and often do have different formats.
So it's not possible to talk about adding a certain manufactures file or extension you need to specify the camera make and model. Then you can see what version of Aperture and Camera RAW bundle you need to accomplish that.
See http://www.apple.com/aperture/specs/raw.html for the list of RAW cameras currently supported. The only Kodak that shows up is the DCS Pro/SLR n which was supported starting back with Aperture 2 in Tiger or Leopard.
regards
Message was edited by: Frank Caggiano

Can't import .txt keyword file into Aperture! Help!

Similar Messages

Maybe you are looking for