Can't import with "Do not import duplicates" checked

When I import photos from my camera, I always use Do Not Import Duplicates/Apply to All. Lately, however, when I do this, the import stalls- the progress bar goes gray, and nothing happens. I have to Cancel, then start the import again, and import all duplicates. When I do this, the import works.
What might be causing this? It's a pain to have to bring in these duplicates over and over.
Thanks.
BC

It is a bug in the software, do a search of older posts. This happens to me when the memory card is quite full. There are several options.
1) use the application image capture
2) clear your memory card after you download (no duplicates)
3) use Finder and open the memory card sort the list of photos by date and select and drag the desired photos to iPhoto
Hope this helps

Similar Messages

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail. Apple tech support was worthless.

Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Noticed the problem a couple of days ago.
Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail.
Apple tech support was worthless on both issues.

Hi I am also in the UK, but not with Tiscali and am having the exact same problems. I can also send with wifi, but not 3G. I have tried amending all sorts of settings, including those above and amending the smtp server to the settings for my provider, but all to no avail.
It is thoroughly frustrating, as I cannot send emails unless I have wifi access.
Any further suggestions would be very welcome.

CUSTOMER_REL - Business partner not created; duplicate check on address

Hello Colleagues
I have a problem during CUSTOMER_REL replication from ERP to CRM.
In r3am1 object looks fine but in some BDoc following error appears:
Assignment person - address exists already
Message no. AM038
and the Business Partner for Contact Person is not created.
We are on:
SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0001     SAPKITLRD1          SAP Solution Tools Plug-In
SAP_BS_FND701     0005     SAPK-70105INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
SAP_AP     700     0018     SAPKNA7018     SAP Application Platform
WEBCUIF     00     0005     SAPK-70005INWEBCUIF     SAP WEBCUIF 700
BBPCRM     700     0005     SAPKU70005     BBPCRM
BP-CRM70     700V1     0000               SAP Best Practices for CRM 7.0
BP-INSTASS     600V7     0000               SAP Best Practices Solution Builder
ST-A/PI     01L_CRM5700000               Application Servicetools for CRM 500 51
And have already applied
1394635
1396910
1397895
1410788
1438046
But it is seems problem lies on SAP_ABA as I have found note
1092089 - Business partner not created; duplicate check on address
which is valid for different BP role and
SAP_ABA 700
SAP_ABA 710 but not for our 701
Have you ever seen similar issue?
Thanks in advance
Michal

Hi Naresh,
Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
What is more we have implemented in our CRM note 564538 To change Contact Persons grouping replicated from ECC to CRM.
But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
We checked as well
Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
Thanks in advance if you have any other idea.
Cheers,
Michal

I want to restore my photos from icloud i had ipod touch .. Thats stolen right now so i bought i pod mini but cant get my photo back by using icloud i can get apps back thats not important i could find apps the important was my photos :(

Hello there i had i pod touch .. Thats stolen and i had many photo on that device so i bought an ipad mini now but i cant get my photos backk i only can restore my apps .. That is not important cus i could download them again the important is getting back my photos i tryed every thing and still couldnt get the photos back only i getting the aps .. Any help :-s ?

The backup of your iPod Touch would include your camera roll photos. Restoring the backup to another iPod Touch or iPhone would recover them. Photos will not be restored by restoring the backup to an iPad.
Note: Apple deletes iCloud backups after 180 days of inactivity so be sure to do this before then.

Install LR3 with LionOSX- not importing CR2 files

When LR3 is installed, it will not import my CR2 files. tried an un-install and still no results. when i install LR3.5 on laptop (without Lion) everything works fine. what is going on?

Does LR 3 support your camera? Are you hooking the camera to the computer or using a card reader? What type of error or failure are you getting?
Some detail would be helpful.

Import From Catalog Not Importing

Hi,
I'm using LR 3.4.1 on an 2.8 Dual Core imac running Osx 10.5.8 and 4 gigs Ram.
Im new to LR but have used photoshop (and teach it) for many years so not a complete novice.
Anyway I have decided to import all my ctalogs into a single blank Master one as I can see this will be much more convenient.
I have imported 1 catalog so far using Import from catalog >I then get a preview and option to uncheck or check files I want > then I select>Add new photos without moving.
This worked a treat and I have appeox 55,000 images so far in the Master catalog.
I now want to add another 2 external drives which I also already have catalogs for BUT after selecting >Add new photos without moving nothing happens.
Have I reached a limit of how many images can be in one catalog ? I don't think so.
All my images are keyworded but I'm not sure this makes a difference although I did read something somewhere that this can cause problems with version 2.
Any suggestions? I have trashed my pref file but still no good.
Cheers,
Simon Plant

I just found that right clicking the folder and choosing, "Find Missing Folder..." moves it to the correct location in the Lightroom folder list, but this seems, to me, like a pointless step to have to make...

Import Image Sequence not importing all images

I have a sequence of 99 JPG images that I am trying to import into Premiere Pro. These images were created by an export from Lightroom.
When I perform the import starting at the first image, only 35 images are imported.
If I import the sequence starting at the 34th image, only 2 images are imported.
If I import the sequence starting at the 35th image, only 1 image is imported (and it is imported as an image file it appears).
If I import the sequence starting at the 36th image, the remaining images are imported.
I have tried a number of different settings for the export from lightroom, but it doesn't seem to make a difference. For example, if I export as TIFF I see the exact same problem. If I export as JPG using a smaller image size I see the exact same problem.
I have tried "Replace Footage..." to no effect.
When I inspect the image files using an image view there appear to be no issues with the files. File sizes are consistent and not inordinantly large (~5MB).
The filenames are all properly numbered as expected by Premiere Pro.
I have done this successfully dozens of times before this problem arose, and I have done it successfully a number of times since the problem arose. The problem appears to happen only with this particular set of images.
I can work around the problem by importing the images as two separate imports (one starting at the first image and a second starting at the 36th image) and putting them both in a single sequence. In fact, this spliced sequence looks as expected with no missing frames or anything else untoward that I can see.
I've poked around with this for a couple days, and cannot discern any other factors that may be causing this.
Does anybody have any idea what might be going on?

I checked the filenames again and they're properly sequenced with no extra or missing spaces or anything else that doesn't follow the pattern of the first 34 images. In fact, I took a screenshot of this, and in doing so I figured out what the problem is.
Here's a screenshot of the directory with all the images.
As I was reviewing this screenshot, I noticed that the "Date" column goes over midnight. Images 0001-0034 all took place before midnight, and images 0035-0099 took place after midnight.
This column shows the capture time of the images, coming from the camera and through the export from Lightroom. This is different from the creation date of the exported file, which is shown in the "Date modified" column (cropped out of screenshot). In other words, you can see that I took the pictures on February 25 and 26, but exported them on March 1.
To verify that this might be the problem I used "Edit Capture Time..." in Lightroom to shift all the images an hour earlier. This means that there is no longer a date change in the sequence as they all have capture times before midnight. I then exported the images from Lightroom again, and imported them into Premiere Pro.
When I do this, all the images are imported into Lightroom successfully.
I realize this is only one data point, but it sounds like Premiere Pro is maybe using the capture time as part of its sequencing heuristics, and for some reason it isn't handling a date change properly. Or maybe something else is afoot.
What do you think?
Message was edited by: reastick trying to fix link to screenshot...
Message was edited by: reastick ...well that didn't work either...

Trouble Importing Home Video - Not importing full clip

I've never used iMovie before but I figured out how to get a home dvd imported. I mounted the disk image and everything and when I open iMovie is gives me the import menu. I import my clip and it tells me that it's imported 120 minutes of video but when I click on the new event there's only 48 minutes of video. Where's the rest?

This is what PYRO's Technical support told me. I plan on getting back to them with follow up questions let me know if you have one you would like to pass on.
Tech Support (18 Tech) - 7/26/2006 1:41:45 PM
Tihs is not likely to be happening because of anything on your system (the pattern would be a bit different usually.) This happens because the hardware is dropping frames that cannot be properly translated.
Analog tapes may often contain spots where the magnetism is weak, the tape is stretched, warped etc where the signal that is read off of it when sent from the VCR incorrectly. The reason is that the VCR doesn"t build the signal; it simply does a straight electronic conversion of the signal on the tape to signals on the wire. The problem is that in order for a computer system to understand it as video, the signal must adhere to a strict structure.
When the signal becomes out of order or a part of the signal drops out, a video computer will have a problem and will lose frames unless hardware is present that can anticipate and fill/repair the missing component (most commonly, time-base correction.) These bad signals don"t typically manifest themselves visibly on an analog monitor unless the defect is prolonged (such as distorted video at a bad warp on the tape or the bad video between multiple recording sessions) but they are still there and anything that is trying to compute data from those signals is going to have a problem.
The only thing you can do is try to clean the heads of your VCR or Camcorder using a cleaning cassette or try to run the video through hardware that can do video enhancement/time-base correction, which will repair the signal thus allowing it to be captured uninterrupted. Every time the signal is interrupted, the video processor and DV compressor will take about a second to sync up and resume capture and that is what you"re seeing in those drop-outs.

Can't sync with Lotus Notes

Phone: 6233
PC Suite: 6.85.14.1
Notes: 6.5.1
Have entered server name in settings:
name/SRV/companyname
Filename:
mail\myname.nsf
Both of these are taken from Notes, but not 100% I picked the right ones since I'm new to Notes.
Get error message: name/SRV/companyname!!mail\myname.nsf Server not responding. Server could be down or you have network problems....etc.
Seems that PC suite inserts exclamation points in the address. Tried replacing server address with IP, e.g.
12.123.123.123/SRV/companyname but that didn't work (same result).
God I miss outlook ;-)
Can anyone help?
-L

HI all,
First of all for those who do not know how to create a local database in Lotus Notes,
File -> Database -> New -> in Server name, give a filename of your own and Filename, you have to specify the complete path of the file. ( For example, if you are creating a file in desktop, complete path is C:\Documents and Settings\username\Desktop\x.nsf)
username = name which you have logged in
x.nsf = Filename you have created newly in local
and in Server template select Mail(R7) i think since i have installed lotus notes 7.0 i have selected Mail(R7).
Once new file is created in local server as said above,
Sync settings in Nokia PC Sync
In sync settings in Nokia pC Sync, select Lotus Notes 7.x, ( i have installed lotus notes 7.0) for calender sync, Server name should be local and in Filename, give the complete path ( something similar to C:\Documents and Settings\username\Desktop\x.nsf, if you have stored your file in the desktop) with the name.
Now sync the calender with Lotus Notes.
Hope it may help you Best of Luck

LR Photo Import from Camera suddenly not working (5.7.1) - States "Some import operations were not imported becuase they could not be read." Works on another computer and 4.3 version of LR on same computer but not newly installed LR 5.7.1 cc 2014.

As above, all of a sudden, on one computer I cannot download from either the Canon 50D or 70D into LR 5.7.1. It will download on another computer as well as on this computer in an older version of LR (4.3). When I first turned on the computer this morning, I also got an error message that "The Lightroom catalog named 'Lightroom 5 Catalog" cannot be opened because another application already has it opened." It was a cold boot, so I am not sure what is happening.

For the second problem being that the catalog is open in another application, go to the folder containing your catalog. You will find a file with the .lock extension. This is a file created by the catalog, and is automatically deleted when the catalog closes normally. Sometimes it can get left behind. You need to delete that file.
When Lightroom says that the file cannot be read, it usually means that it cannot be written to the chosen destination. This tends to be a permissions problem in your operating system. Check to make sure you have write permission for the folder you are trying to import your images to.

Half of my imported files do not import the entire file?

I recently shot some high speed video using 2 Phantom high speed cameras. After converting the clips form their raw format to AVIs at 5 fps, I imported them into Premiere Pro CS5 to put together a side by side comparison. All of the AVIs imported into Premiere, however approx. half of the clips didn't fully import. For example a clip that is supposed to be 01:09:24:13 is coming in at 00:00:28:27. It's not a random compression, because when I compare the clip playback in premiere it does indeed represent the first 28 seconds of the AVI. I tried converting the files again in the Phantom software. One of the clips I was able to import and get the entire clip, however subsequent attempts for the others has not achieved the same result. I even attempted to import the clips into Premiere Pro CS3 on another workstation with the same results.
If anyone has seen a problem similar to this, a work around or a fix would be greatly appreciated, I'm on the clock on this one.
VJAW

Welcome to the forum.
Though with different file types, I have encountered similar - file Duration is mis-read in PrPro. Obviously, something in that/those file(s) header is being missed by PrPro. I have yet to find out what. As per your case, it seems to be with random files from what should otherwise be a simple group of the same file types, with the same exact conversion settings.
In my case, I get handed a lot of different file formats, and just use a conversion program to get those to DV-AVI (in my case) for SD Projects. Often, I will have a situation, rather like yours, where I will have 5 files, whose specs. all match up (same camera and settings in your case), and the conversion will be batched, and all resultant files identical. From time to time, one of those converted files will exhibit the same characteristics, as you observe. VLC, or other players, will see the full Duration, as will G-Spot, or MediaInfo. However, PrPro is missing something in that one file, and the Duration is heavily truncated, just as has happened to you. Quite by accident, I found that my PremiereElements program had no such issues with the "bad" file. It would Import and see the correct Duration, where PrPro could not. I just Imported, dragged to the Timeline, and then Exported to the same exact file settings, DV-AVI. The resulting file was identical to the problem DV-AVI that I had Imported. G-Spot and MediaInfo say it exactly the same. Various file "comparisson" programs could find no differnces between the two files, yet PrPro now saw the Duration correctly. I only wish that I could tell what went wrong, regarding the Duration in the originally converted file, and then the one that I just Imported and Exported from PrE, but I have never found the difference. I have opened the files in hex-editors, and gone line by line, and cannot find anything different between the two - but something IS different.
While I have no fix for you, I can add slight comfort by saying, "I've seen very similar, and in similar cases - conversion." My "workaround" involves some extra steps (plus an extra Export), in another Adobe program (in my case), so is not ideal. However, now that I know to be on the lookout for the possibility, I just watch those Durations closely, knowing that I might need to work on one, or more, of those files, to get PrPro to see the proper Duration.
Good luck, and maybe someone can offer us both a totally fail-safe method.
Hunt
PS - I have encountered this with my old-fav, and generally flawless DigitalMedia Converter 2.7, plus several other highly recommended conversion progams, so it does not seem specific to any one conversion program.

Import-Pssession is not importing cmdlets when used in a custom module

I have a PowerShell script/function that works great when I use it in my PowerShell profile or manually copy/paste the function in the PowerShell window.
I'm trying to make the function accessible to other members of my team as a module. I want to have the module stored in a central place so we can all add it to our PSModulePath.
Here is a copy of the basic function:
Function Connect-O365{ $o365cred = Get-Credential [email protected] $session365 = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUrihttps://ps.outlook.com/powershell/ -Credential
$o365cred -Authentication Basic -AllowRedirection Import-PSSession $session365 -AllowClobber }
If I save this function in my PowerShell profile it works fine. I can dot source a *.ps1 script with this function in it and it works as well.
The issue is when I save the function as a *.psm1 PowerShell script module. The function runs fine but none of the exported commands from the Import-PSSession are available. I think this may have something to do with the module scope.
I'm looking for suggestions on how to get around this.
I've posted this on www.stackoverflow.com as well but unfortunately haven't had any luck finding a solution.

Hi,
As we know there are some kind of powershell profile:
You can have four different profiles in Windows PowerShell. The profiles are listed in load order. The most specific profiles have precedence over less specific profiles where they apply.
%windir%\system32\WindowsPowerShell\v1.0\profile.ps1
This profile applies to all users and all shells.
%windir%\system32\WindowsPowerShell\v1.0\ Microsoft.PowerShell_profile.ps1
This profile applies to all users, but only to the Microsoft.PowerShell shell.
%UserProfile%\My Documents\WindowsPowerShell\profile.ps1
This profile applies only to the current user, but affects all shells.
%UserProfile%\My Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1
This profile applies only to the current user and the Microsoft.PowerShell shell.
What happen when you save it in the first path.
In addition, please also refer to the below links:
Windows PowerShell Profiles
http://msdn.microsoft.com/en-us/library/windows/desktop/bb613488(v=vs.85).aspx
Understanding the Six PowerShell Profiles
http://blogs.technet.com/b/heyscriptingguy/archive/2012/05/21/understanding-the-six-powershell-profiles.aspx
Regards,
Yan Li
Cataleya Li
TechNet Community Support

Payables Open Interface Import program is not Importing the Invoices

Hi All,
We are trying to create new invoices (SUM_DIF) based on the Foreign currency gain/Loss amounts. But payables open interface import program is rejecting all invoices with the rejectionr code as "No Invoice Lines, Atleast one invoice line is required".
But when we check in the interface tables we have invoices as well as the corresponding lines for those invoices. This issue is happening in 12.0.6
Any one faced this similar issue earlier? Any help is highly appreciated.
Thanks,
Rama Krishna.

Hi,
No issues for me on Payables Open Invoice Interface with 12.0.6 - and yes make sure you match up the invoice_id on invoice, lines interface tables.
Regards,
Gareth

Can someone help with 'itunes not responding' (please)

Hi, hope some (cleverer than I) person can help. I have a nano - working off laptop with XP home. I upgraded to latest itunes and now whenever I start itunes it freezes and if I open task manager it shows itunes as 'not responding'. I have reset the nano and ensured it has latest operating software on board. I have even got rid of all music files from laptop. I have tried (several times) removing itunes completely (including those files that do not get deleted by a standard 'undelete') and still this problem persists. It all worked fine prior to this ******* latest itunes download ****. Why are apple such greedy tossers? Please help if you can I am so ****** off.
Paul.

Dont know if this will help or not do you have norton security. if so follow this
have found a solution that works for me with windows XP. First restart the computer and don't start up itunes. Open Norton Internet Security and click on Status and Settings. Then click on personal firewall and then click on Configure, and click on the Programs tab. Scroll through the list of programs until you have goten to Apple itunes. Change the interntet Access to Permit All. Once you have saved these settings start up itunes. That worked for me. Please tell me if this helps anyone.
Windows XP

Can LabVIEW work with https (not http)?

I have trouble to use LabVIEW 6i to GET response from HTTPS server. It works with HTTP server smoothly. (I changed the port 80 to 443.) Are there any package can work with HTTPS? BTW, I also have LabVIEW 7 and will use that if 7 has the solution.

landlord wrote:
> I have trouble to use LabVIEW 6i to GET response from HTTPS server. It
> works with HTTP server smoothly. (I changed the port 80 to 443.) Are
> there any package can work with HTTPS? BTW, I also have LabVIEW 7 and
> will use that if 7 has the solution.
HTTPS means that the data is encapsulated in some sort of secure
protocol layer such as SSL. You do not want to implement SSL in LabVIEW
I think.
In order to establish a meaningful connection with an HTTPS server you
need to establish a secure context with authentication through
certificates, crypto algorithmes and such. For this you have specific
libraries like OpenSSL and such and you could call them as an external
library. But you can not plug them into the LabVIEW TCP/IP functions to
let
them transparently handle your TCP/IP communication.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Can't import with "Do not import duplicates" checked

Similar Messages

Maybe you are looking for