Can't initialize D3D device...

I just burned a pc game (.iso) and installed on my laptop...the install went well, or so I thought...when the installation completed, and I clicked the icon to play the game, I got a white screen, with an error message window saying: "Can't initialize D3D device"
Does that mean I have to uninstall this game and toss the dvd in the trash now? During the install process, I told it to install DirectX, maybe I shouldn't have done that? I give up.
This is what my laptop is: Hewlett-Packard HP G72 Notebook PC

Guys i just found a solution for crashing this game.You must download a software called 3D Analyze first.go here http://www.tommti-systems.de/go.html?http://www.tommti-systems.de/main-Dateien/files.html DONE??? Then open the software and hit on the big button Select.then a small window pops up and there you have to browse to the directory where u have installed pacific carriers and select the game executable(ACPC.exe).then hit open.it will load acpc into 3d analyzer.way to go guys.here u have to tick some boxes.do like this.
1.tick on emulate HW TnL caps.
2.in the left middle of sotware window there are 2 text boxes.enter 4318 in VendorID and 592 in DeviceID.
3. THEN CLICK RUN!!!! You see the game running like a charm

Similar Messages

Satellite M115-S3094: Error message - Can't create a D3D device

Hi,
I accidently deleted a graphics card driver but managed to get it back, but before i deleted it i used to play the game pkr (3d poker) but now when i load it, it comes up with an error saying "Could not initialize client - Can't create a D3D device - -2005530516, -".
Also all my folders on my desktop don't appear. The only way i can get this up on screen is by pressing the keys ctrl + alt and delete and then typing in desktop.
All this started to happen when i tried to connect my laptop to the television.
I am using Windows XP media center. It's a a Toshiba Satellite M115-s3094.
Can anyone please help as it's driving me mad as i am very close to smashing the laptop in frustration.
I don't know the driver its using as all it says is unknown. If anyone can help or even give me an idea on how to fix this then i would be very grateful.
Cheers for your time.

Hi
Sounds a little bit like the Direct3D were not enabled in you graphic settings.
Please start the DirectX using the command dxdiag and enable all 3D settings.
Furthermore it would be advisable to remove the installed 3D poker game and then to reinstall it again. This should help to reconfigure the game graphic settings which are necessary to run the game properly.
Good luck

5.1.4 update breaks HDV capture? Unable to Initialize Capture Device

Problem:
Final Cut Pro cannot capture standard 1080i60 HDV footage from Sony FX1 camcorder. FCP reports "Unable to Initialize Capture Device" when the log and capture window is opened. However, the footage CAN be captured in iMovie (which is interesting, and unacceptable). When HDV>DV downconvert option on camcorder is activated, footage CAN be captured as anamorphic SD, so the camcorder and FW do work.
The problem is occuring on a rock-solid FCP system that I use on a regular basis (mainly for SD editing). It has been approx 2 weeks since I last attempted a HDV capture, the system has been working great with SD footage (still does).
Factors that have changed to my knowledge since HDV capture was last functioning properly:
*Added a new external FW drive into regular usage (a different brand than normally used, no issues with it so far).
*Updated FCP to 5.1.3, and then 5.1.4 when that fix came out. All SD captures and work have been fine so far.
Here's what's interesting...I had a copy of the FCP v5.0.4 .app that I had saved an archive of prior to the crossgrade update. Guess what? I can load it up, and it captures HDV without any problems! With that in mind, this looks like an FCP 5.1.4 issue. But I am at a loss on how to proceed further in troubleshooting. Many thanks in advance for any assistance.
Matt Jeppsen
FresHDV.com
---NOTES---
What I have tried:
*Attempted capture with a different Sony FX1 camcorder.
*Swapped firewire cables and system firewire ports.
*Attempted capture with camera FW chained to an external HDD.
*Unplugged all other external firewire devices from the system.
*Trashed FCP prefs using FCP Rescue 5, created new project using Easy Setup (for HDV).
*Tried different variations of FCP A/V settings, tried all the HDV FW device control presets and the HDV AIC capture preset.
*Per instructions at http://docs.info.apple.com/article.html?artnum=301852 I removed the numbered Quicktime pckg Receipts and re-installed the latest version (7.13). Post-install/reboot, I repaired Disk Prefs and Verified the disk using Disk Util.
*Have also attempted installing QT 7.13 2 and 3 times in a row, also trying disk prefs repair BEFORE the post-install reboot.
Final Cut Pro Audio/Video Settings:
Sequence Preset: HDV-1080i60
Capture Preset: HDV
Device Control Preset: Sony HDV Firewire
Sony HDR-FX1 IN/OUT REC settings:
*VCR HDV/DV: HDV
*COMPONENT: 1080i/480i
*i.LINK CONV: OFF
*TV TYPE: 16:9
*A/V->DV OUT: OFF
System/Software Facts:
*Final Cut Pro 5.1.4
*Quicktime 7.13
*PPC Mac G5 2.7 Dual (2.5GB RAM)
*35GB free on System, 45GB free on internal FCP Scratch disk
Final Cut Pro 5.1.4, G5 DP 2.7 (PPC) Mac OS X (10.4.8)

I think I figured out this vexing problem. I too was having the same issue. Check to see that your Quicktime is newer than 7.1.2. If it isn't you'll have to upgrade it. I only upgraded to 7.1.6 here because I was afraid of going to a really new version. http://www.apple.com/support/downloads/quicktime716formac.html. After I upgraded my quicktime, I ran software update and the Final Cut Pro 5.1.4 update appeared. I hoipe this helps.

Unable to Initialize Capture Device - Works fine in iMovie

Am using a Sony HDV HDR HC1E Pal Handycam
Final Cut Pro 5.1
QT Pro 7.1.3
Works fine with cassettes in HDV - imports into FCP fine
Am trying to import a cassette recorded on that camera in DV LP
Works fine in iMovie
Have deleted the QT packages and reinstalled QT
Still am getting the 'Unable to Initialize Capture Device' message when using log and capture.
Settings on camera
VCR Auto (have also tried HDV or DV)
iLink conversion off (i.e.don't convert hdv-dv)
TV type 16:9 (have also tried 4:3)
Component 1080i/576i also tried 576i
Annoying thing is that works fine in iMovie but not FCP?!!
Any help GREATLY appreciated!
Thanks!
Hannah
iMac 20 Flat Screen G5 1.8Ghz 1.5GB SDRAM Mac OS X (10.4.8) 200 GB and 120GB External Hard drives

I would like to add the following in hopes that someone will come up with a solution. The problem lies somewhere in Quicktime and the FireWire capture. I have the exact same camera and problem, and can assure you it has nothing to do with cam settings or DV LP. Once your system is stuck in this HDV mode, it would seem that regular DV can not be used again. I also have 2 other DV cams that are not HD. One is PAL, one is NTSC. I would further add that my external FireWire iSight no longer works in any application. I do not receive error messages, I simply get the spinning beach-ball of death.
I have a Dual G5 2.7 with 4 gigs RAM running FCP 5.0.4 on OS 10.4.8
I have run Cocktail, rebuilt permissions and re-installed Quicktime 7.1.3 four times as per Apples tech article 301852
I have used FCP Rescue 5 to clear preferences
I have captured footage from both regular DV cams to iMovie and then added the footage to FCP. The footage plays on the screen of both DV cams flawlessly via FCP. (I can also capture HDV in iMovie as well)
I have tried logging footage directly through the QuickTime application with both DV cams and my iSight and get the same beach-ball of death as FCP.
Why can iMovie work with these devices flawlessly yet QuickTime can not.
Why does it seem like the system is stuck in some kind of HD mode.
Just to point out the obvious:
I have no other FireWire devices other than the cameras and I only connect one at a time.
I have shut down, disconnected and re-connected before attempting to use the devices.
I have booted my G5 from a second system disk and everything (HDV cam PAL DV cam NTSC cam and iSight) function flawlessly on all the FireWire ports of my machine.
I have worked with FCP for about 6 years and Macs for 20. I understand the easy set ups etc.
Spent way too much time customizing my system to think about the clean install route, so I hope someone can shed some light on this.
Thanks
Lorne
PowerMac Dual 2.7 GHz PowerPC G5 4 GB DDR SDRAM 400 GB and 250 GB Internal Drives Mac OS X (10.4.8)

Couldn't initialize capture device on linux Ca

I have installed j2sdk1.4.2-02 and jmf 2.1.1e on linux.When I started jmstuido ,jmstudio found "video capture device ":Name=v41:OV511+USC Camera:0
Locator = v41://0 and support Output Format :four kinds of YUVFormat .
audio capture device :Name=JavaSound audio capture
Locator = javasound://44100 and support Output Format :seven kinds of AudioFormat LINEAR.
But when I open file->capture ,video display OK and audio display error :"controller error ! failed to prefetch: cann't open audio device."
when I open file->transmit , I want to transmit video not audio and the monitor display OK but the other side cann't receive video.
I write some codes :
     DataSource dsvideo = null;
     Vector deviceList=null;
     CaptureDeviceInfo di = null;
     MediaLocator ml=null;
deviceList = CaptureDeviceManager.getDeviceList(new VideoFormat(null));
if (deviceList.size() > 0)
di = (CaptureDeviceInfo)deviceList.firstElement();
else
System.err.println("System has not video device!");
System.exit(-1);
ml=di.getLocator();
DataSource ds=null;
try
ds = Manager.createDataSource(ml);
catch(NoDataSourceException nodatasourceexception)
System.err.println("Cannot create DataSource from: " + ml);
System.exit(0);
catch(IOException ioexception)
System.err.println("Cannot create DataSource from: " + ml);
System.exit(0);
catch (Exception e)
System.err.println("Cannot create DataSource from: " + ml);
System.exit(0);
compiling is ok but when I run the program ,the system display:
java.io.IOException: java.lang.Error: Couldn't initialize capture device
Cannot create DataSource from: v4l://0 .
with the same condition and the same executing , I can be successful on windows2000.Why is not on linux?Please help me. thanks a lot!

I have installed j2sdk to /java/j2sdk and jmf to /java/jmf
I have added to /root/.bashrc including:
JAVA_HOME="/java/j2sdk"
PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/local/sbin:/usr/local/bin:/usr/games:/java/j2sdk/bin:/java/j2sdk/lib:/java/j2sdk/jre/bin:/java/j2sdk/jre/lib:/java/jmf/bin:/java/jmf/lib"
JMF_HOME="/java/jmf"
LD_LIBRARY_PATH="$JMF_HOME/lib:/java/j2sdk/jre/lib/i386:/java/j2sdk/jre/lib/i386/client"
LD_PRELOAD="/java/j2sdk/jre/lib/i386/libjawt.so"
CLASSPATH="$CLASSPATH:$JAVA_HOME/lib:$JAVA_HOME/jre/lib:$JMF_HOME/lib/jmf.jar:.:$JMF_HOME/lib/mediaplayer.jar:$JMF_HOME/lib/multiplayer.jar"
[ "$UID" = "0" ] || PATH="$PATH:."
export PATH JAVA_HOME JMF_HOME CLASSPATH LD_LIBRARY_PATH LD_PRELOAD

Couldn't initialize capture device

I am not able to capture any video from my webcam (Logitech USB Camera). I am working with linux red hat 8, so maybe it's a Linux issue (I got the liux jmf-2.1.1). Anyway, when I try to create a player or processor I get a NoPlayerException, but my webcam is found when i call Vector devices = CaptureDeviceManager.getDeviceList(new RGBFormat()) and I am able to locate the camera with MediaLocator loc = device.getLocator()(Media Location is v4l://0 in case it matters). But when I try to create a player I first get an IOException: Couldn't initialize capture device and a NoPlayerException.
JMStudio is able to initialize the capture device but I just get a black screen. But I can take snapshot images without a problem.
I am actually working on a robotics vision project for my university and i need the camera to plug it on the robot for vision problems.
thanks, muriel

I've had the same problem, I have a Lego camera (basically a quickcam) and it works fine under Linux with the qc-usb driver. Under JMStudio, it is detected, and I can capture from it, and this will work for any user, not just root. When I try to list the devices from my own Java code, however, I don't get any devices. If I run the V4LAuto class (found in the JMStudio source), the camera is detected. Either way, it won't initalize when I try to use it. I've looked through the JMStudio source code to try to see what it does differently so that I can use the device.
On the camera, the light comes on to say that someone is requesting the stream with my own code, but the stream fails to initalize.
I'm running RH9, kernel 2.4.21 (qc-usb won't work on 2.4.20-8). Does anyone know if this has to do with a permission in Java? It shouldn't, but it might.

Windows 7 Desktop error message "Can't initialize plugins directory" - Blocked from Installing/uninstalling anything

Blocked from running *.exe
files. Blocked in Control Panel from Uninstalling anything.
Consistently returns: "Can't initialize plugins directory"
What I tried:
1. Safe Mode with Network
2. File cleanup from C Drive Tools
3. Environmental variable: changed
to this c:/TEMP
c:/TMP (Created TEMP folder
on
directory tree.)
4. Googled error-- known
issue but fixes do not work. (Created New Profile, SFC Scan
of Windows files, moved TEMP folder,
etc)
5. Run as administrator
6. Started after the support desk for ACT client management software uninstalled SQL to restore access to a CLIENT database that was lost for reasons unknown. So it appears some damage was done.
Question is, what was damaged and how to fix it, if this caused this problem and it was not malware fiddling with
registry.

Hi,
You can open Control Panel\System and Security, click
Event Viewer under Administrator Tools to check if some logs record recent errors.
Also you can start computer and typing F8, click Repair Your Computer to perform
System Restore.

Can not see the device net Master Interface in my project.

Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk?

Unable to Initialize Capture Device

Hi,
I am having a problem importing/capturing HDV video from my JVC HD GR 1 getting "Unable to Initialize Capture Device".
I have been able to capture fine up to this point, finicky some times to be sure, but workable, then in the last few weeks it began getting more and more finicky (wouldn't connect to camera, restart and it works fine), until just the other day it wont connect no matter what I do!
Help?
Ask questions if you need clarification.
Camera: JVC HD GR 1
Tape: Mini DV
Format: HDV
Software: FCP 5.1.4

Unfortunately when both "Capture" and "Device Control" presets are not set to HDV it wont even try to connect and gives me this warning:
"To capture HDV source material, both the Capture and Device Control presets must be configured for HDV; otherwise, to capture in another format, both must not be configured for HDV."
As a side note when my camera was connecting to FCP. FCP would only give me on screen controls half the time.

Unable to initialize capture device and device control in HDV

I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
Im at my wits end, Ive been working on this for a whole week now.
Thank you,
Bugs

It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
x
To do a full quicktime reinstall.
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
If this doesn't work, then the problem lies elsewhere:
1. your system - user preferences, firewire ports or other system elements.
2. your equipment - camera/deck/firewire cables.
3. your process - not setting up the software properly or using the software erroneously.
Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
Troubleshooting Steps for OS X
by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
FIRST AID
01 Completely shutdown, wait a 5 minutes, restart
02 Make sure you're not running out of free space on the System volume
03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
04 Repair permissions using Disk Utility
05 Create a new user account, and see if the problem persists there
06 Clear system & user caches
07 Run FCP Rescue
08 Unplug all USB, Firewire devices except Apple mouse
09 Startup in SafeBoot mode, and see if the problem persists there
10 Reset system firmware
MORE SERIOUS TROUBLESHOOTING
11 Reapply the latest combo updater
12 Run the Apple hardware diagnostic CD
13 Check the hard drive for bad blocks
14 Take out 3rd party RAM
15 Unplug 3rd Party PCI cards
16 Reset PMU
17 Archive and reinstall the OS
18 Reinstall the system from scratch
19 Send the machine back to Apple

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

Hi, I have a problem with my ipod touch: I can not activate my ipod with my Apple ID, it tells me that my account can not activate this device, but my ID apple is OK and the ipod is mine, I have my ballot, HELP PLEASE

Hi ...
I have a problem with my ipod touch:
I can not activate my ipod with my Apple ID, it tells me that my account can not activate this device, but my apple ID is OK.
The proposed me as ipod help entering previous credentials, but the ipod is mine from the beginning, in fact I have my ballot, not bought down to another user.
Actually I do not know how to activate it in Chile were unable Store MacOnline solve my problem, it is for this reason that I am writing to see if someone can help me.
PLEAAASEEE
Thank you.
Sebastian

Thanks for your answer.
actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do.

Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

Can I have multiple devices on one iCloud account

can I have multiple devices on one iCloud account? Like a iPad and Mac Book Pro
If so how can I do this?

Sure. That is what iCloud is meant for, so you can keep your devices synced.
When you set up iCloud on the devices, use the same Apple ID on all devices, then the iCloud account will be the same.
see this page: http://help.apple.com/icloud/#/mmfc0f1e2a

Have a company based itunes account, trying to share itunes on bank owned devices. can't get all devices to keep our shared password on them without requesting user to enter password (which i am not giving them)

i am an IT manager for a bank. we have several company owned iphones. WE have also implemented a mobile device management system to manage our iphones.
We setup acompany based itunes account, trying to share itunes on bank owned devices. This way i can add bank approved apps to the devices through our itunes account and push out to the iphones, and no one can download any other non bank approved apps.
it has been working ok. but recently i had one user who came in. He went to enter in his itunes account on the phone and didn't work. So then came back and my staff and myself have (as much as we can see) removed his email account itunes login from all sections in settings. and entered in our itunes account information, but when you go to the app store, and hit upgrade, it still shows his email account for itunes. I feel like i can't get all devices to keep our shared password on them without requesting user to enter password (which i am not giving them)
How can i troubleshoot his device. i tried changing password 5 times today, rebooted device, and no change.
Jenn McGlynn

i have an MDM application, and i push out the apps i want them to have with our IT apple id account. for some reason when two approved apps needed updating last week, they prompted him for our password. (which i told him to bring phone in and i would enter password).
but somehow he went to try to enter his personal to make it work (don't know why)
somewhere it's keeping his personal email. i went into itunes/apps and our apple id is in there.
there is nothing in icloud b/c we do not allow icloud, so that's clear.

Can't initialize D3D device...

Similar Messages

Maybe you are looking for