Can't instal newest video driver

I have T400 running Win7-SP1, with an Intel 45 integrated graphics chipset. I've downloaded the latest driver for Win7x64 systems from the Lenovo site.
I'm sure I've downloaded the right driver, but when I tried to install it, I get an error message that says it's not compatible with my system.
I can't figure this out.

Similar Messages

Can I install a super drive dvd buner?

I have a G4 (466 MHZ) I would like to buy a digital movie camera and make DVDs on the computer from video I have taken. I do not have a dvd burner in the G4.
My question: Can I install a super drive or use an external dvd burner with the current computer?
Thank you.
G4 - 433mh Mac OS X (10.2.x)

Fred's reply is 2007 , but a few years ago, I used my ol' reliable friend, my Cube/450 for creating DVDs.. it needed a looooong encoding time (usually over night), but it does work ...
but...
with 10.2, use old versions of iDVD (4 or 2...)
don't upgrade to QT 7...
be sure, the internal drive has allways 10, better 20GB free....
and, iDVD≤5 does not support external, firewire connected burners... so, if you're able to use a screwdriver, install any nice Pioneer at a free internal IDE connection; or, dare to use a 'hack', http://patchburn.de/ (english spoken), to teach iDVD4 to use external drives...
... that's all not state of the art, lege artis ... but... for less than 50$ you get a DVD-burning Mac..
... a slow burning Mac ...

Can I update bootcamp video driver (nvidia geforce 9400M to GeForce 332.21 Driver)?

Can I update bootcamp video driver (nvidia geforce 9400M to GeForce 332.21 Driver)? http://www.nvidia.com/Download/Find.aspx?lang=en
If yes, if I installed it will this also affect the video card of osx?
btw, I have macbook late 2008 aluminum unibody running OSX mavericks & a windows 7 ultimate on bootcamp..
TIA!!!

While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/windows_software/boot_camp

How many IDE drives & CDrom can be installed with SATA drives??

How many IDE drives & CDrom can be installed with SATA drives??
i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
& if it can be added, can i install 2 SATA drives???
THX in advance

The 3 versions of this board that are available are:
875P Neo-FISR (PCB 2.0)
875P Neo-LSR (PCB 1.0)
875P Neo-FIS2R (PCB 1.0)
All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
2 x SATA (Supporting 2 SATA HDD drives)
2 x PATA (Supporting 4 IDE devices)
All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
->INTEGRATED PERIPHERALS
->ON-CHIP IDE CONFIG
ATA CONFIG: S-ATA ONLY or P-ATA ONLY
S-ATA/P-ATA KEEP ENABLED: YES
OPERATE MODE:
If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
2 x SATA (Supporting 2 SATA HDD drives)
1 x PATA (Supporting 1 Master IDE HDD drive)
The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
So the answer to your origional question is:
2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
or
4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

Can I install two mSata drives in a w520?

Using the two pcix slots in w520 - can I install two mSata drives and perphaps even raid them? Thank you
Solved!
Go to Solution.

You can not. The W520 has only one full sized mSATA slot.

HT5313 .tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

dsharp14 wrote:
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
What are the specs on your Mac? Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
Thanks
Pete

Can't install win7 scanner driver for canon pixma mp260, help please !!!

can't install win7 scanner driver for canon pixma mp260, help please !!!

HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

Run_Esperanza how much space do you still have available on your primary drive? It is possible to customize the installation destination within the Creative Cloud Desktop application. You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Please be aware that you will need disk space on the primary drive to installed shared components plus contain the temporary files for installation.

Lenovo b560 can't install nvidia display driver

hello i've learned that lenovo b560 computers got 2 graphic cards one is intel hd graphics other is nvidia 310m but i can't install the nvidia driver it always gives the no compatible drivers found error :/

hi Frost1,
Welcome to the Forums.
The B560 with Intel+Nvidia graphics uses the Nvidia Optimus Technology to switch between the Intel GPU (for power saving) and the Nvidia GPU (for applications that requires more processing power).
If you have Windows 7, try the following:
1. Restart the machine and hit F8. On the menu, select "Disable driver signature enforcement".
- Sample image
2. Install these drivers then reboot:
1st: Intel Onboard Graphics Driver for Windows 7 (64-bit)
2nd: NVIDIA Display Driver for Windows 7 (64-bit)
If you still get the error, can you PM me your serial number or indicate your machine type (e.g., 0679-3JU) to check the PC specs.
Regards

Can't get any video driver working (X-Server)

Hi everybody (and thx for reading this),
I'm about to install Arch Linux 64 Bit on a new machine, an Acer Aspire 8935G. I installed Arch Linux on several plattforms over the last months with help from the brilliant Wiki-Guide. Unfortunatley I can't figure out how to get the X-Server running this time, so I need a little (???) help here to point me in the right direction.
System is up and running. Graphic Card is a ATI Mobility Radeon HD 4670 (and an Mobile Intel GM45). What I did so far was installing the radeonhd driver first (and later others, because radeonhd wouldn't work) and configure X with:
# Xorg - configure
Which resulted in a message of the X Protocol:
List of video drivers:
radeonhd
intel
ati
radeon
fbdev
vesa
after that I installed and ran HAL, to avoid problems with input hotplugging.
Finally, to test the configuration:
# X -config /root/xorg.conf.new
(EE) RADEONHD(0): rhdAtomGetDDCIndex: GPIO_DDC Index 5 exceeds maximum 5
(EE) RADEONHD(0): AtomBIOS returned 3 Grey Levels
(EE) RADEONHD(0): AtomBIOS returned 3 Grey Levels
(EE) RADEONHD(0): rhdAtomLvdsDDC: unknown record type: c
(EE) RADEONHD(0): ParseTable said: CD_INVALID_OPCODE
(EE) RADEONHD(0): atomSetBacklightFromBIOSScratch: rhtAtomDigTransmitterControl(atomTransEnable) failed.
^C
Playing around with vesa, intel and fbdev didn't bring me any further. Vesa and Intel led to a black screen without responding keys (hard reset is necessary every time) and FBDEV led to a error message:
Primary device is not PCI
(EE) FBDEV(0): FBIOBLANK: Invalid argument
Maybe it's an issue with the integrated full hd monitor, because of the DDC-Message, but googling around didn't help for the moment. The hardware works with Linux, Mandriva 32-bit-Image ran out of the box with X-Server and KDE 4.2. But I would prefer an Installation of Arch Linux with the software, I really need and want.
I will try to add the xorg.conf later on as I'm writing this on an other machine.
Thx in advance for the help!
EDIT (xorg.conf):
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
#Section "Monitor"
# Identifier "Monitor1"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
#EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # 
#Option "CacheLines" # 
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # 
#Option "PageFlip" # [<bool>]
Identifier "Card1"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by ewigkeit (2009-08-12 12:36:46)

zenlord wrote:You do know that with the latest xserver-xorg your xorg.conf is of less relevance?
Yes, I know. I also tried to get it working without an preconfigured xorg.conf. You know it... yeah... results in a black screen ;-).
zenlord wrote:And are you using the latest software? I installed Debian stable on a G45-chipset with intel graphics last week and I had to use at least the 2.6.2-driver IIRC, or upon loading the (old) driver, the DVI-port was disconnected and I was left with a black screen, but otherwise working install
Yesterday, I experimented with the Intel driver, because I found out that Mandriva also uses them, not fglrx like I thought. First I tried the xf86-video-intel. Have given me the typical X-Server feeling at start, probing the monitor I guess, than the backlight of the screen is on but the screen itself stays black. Fells like it's working, just the monitor is not respondig. Tried 1001 different screen settings, but the problem can't get solved. The same phenomenon can be experienced when usen the latest Intel-Git-Drivers from AUR. Last message of Xorg was: Setting up DRM Master or something like that. I will go and check it tonight again and report back.
zenlord wrote:The Ati-drivers are not supported anymore, are you sure your chips is not too new for the opensource drivers?
Like AdrenalineJunky stated radeonhd supports the card. I read about it yesterday.
zenlord wrote:And if even vesa is failing you, than there's more to it.
Where can I sign that? ;-)
zenlord wrote:Have you tried vga for a driver?
Not yet, will be done.
zenlord wrote:What is the output of
# cat /var/log/X.0.log | grep EE
Vesa-Setup
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux acer8935 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 18:10:38 UTC 2009 i686
Build Date: 14 August 2009 11:31:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 17 18:43:33 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xe40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:0:2:0) 8086:2a42:1025:019f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:1:0:0) 1002:9488:1025:019f ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xf0400000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fgl.renamed.libglx"
(WW) Warning, couldn't open module fgl.renamed.libglx
(II) UnloadModule: "fgl.renamed.libglx"
(EE) Failed to load module "fgl.renamed.libglx" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "fgl.renamed.libdri"
(WW) Warning, couldn't open module fgl.renamed.libdri
(II) UnloadModule: "fgl.renamed.libdri"
(EE) Failed to load module "fgl.renamed.libdri" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
dlopen: /usr/lib/xorg/modules/extensions//libdri.so: cannot open shared object file: No such file or directory
(EE) Failed to load /usr/lib/xorg/modules/extensions//libdri.so
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (loader failed, 7)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is:
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VESA(0): initializing int10

Can't install ThinkPad Video Features(Intel and AMD muxless PX4.0)

I recently installed Windows 7 Professional x64. I can not install video driver in my ThinkPad Edge E520 (1143RB2). I did not had problems with this driver when I installed Windows first time after buying laptop.
What do I do to make it work?

I installed one from this page: click
Works fine.
http://snag.gy/YClW5.jpg
Left one's md5 is be32083f6652cf4ad655928d7b1df7e8.
Right one's is 73001d893dafa5c54e2fe15f3d695af7.
It means that thease files are not identical.

Trying to install on MacBookPro with Parallels and Windows 8.1. Downloaded the CreativeCloud.exe but says I can't install from network drive

I sometimes like to use Photoshop CC and Lightroom on the Windows side of my MacBookPro with Parallels. I had to reinstall Parallels and also Windows 8.1 recently and am trying to reinstall some of the software that I had previously on the Windows side. I downloaded the CreativeCloud.exe program and when I try to install it from the Windows side, get a message that I can't install Creative Cloud from a network drive. Where can I put the CreativeCloud.exe so I can install it?
Thanks!

You probably need to check your drive setup for the Parallels environment. Nothing to do with Adobe.
Mylenium

Can I install a 30gb+ drive in a 1G?

Posted this question here a while ago, gonna try again:
Hi, I've got a 20gb 3G, I'm at the point where I need to upgrade to a bigger mp3 player, and I'm really interested in a 1G (rather than a newer iPod model) for a number of reasons. However, obviously I need something substantially BIGGER than 20gb to make my time worthwhile, and 1G only went up to 10.
So... are 1Gs compatible with 3, 4, or 5G drives? Could I buy a larger (maybe 40gb or 60gb) drive and install it in an old first-gen model, or has the actual modelling of the drive/mobo changed since then so that it wouldn't fit? Really looking for an answer here, as if anyone can tell me that it works, I'll be buying a used 1G.
Of course, since the newer drives are so much smaller, I realize that I'll have to put extra padding and whatnot in the 1G, but that's not a problem; I'm just worried about compatibility.
Thanks for any help!

Sure:
ATA is the standard for most hard drives. the ipods use a type called ATA-5.
"Advanced Technology Attachment. A disk drive implementation that integrates the controller on the disk drive itself. There are several versions of ATA, all developed by the Small Form Factor (SFF) Committee:
ATA : Also known as IDE (Integrated, or Intelligent, Drive Electronics) supports one or two hard drives, a 16-bit interface and PIO modes 0, 1 and 2.
ATA-2 : Supports faster PIO modes (3 and 4) and multiword (DMA modes (1 and 2). Also supports logical block addressing (LBA) and block transfers. ATA-2 is marketed as Fast ATA and Enhanced IDE (EIDE).
ATA-3 : Minor revision to ATA-2.
Ultra-ATA : Also called Ultra-DMA, ATA-33, and DMA-33, supports multiword DMA mode 3 running at 33 MBps.
ATA/66 : A version of ATA proposed by Quantum Corporation, and supported by Intel, that doubles ATA’s throughput to 66 MBps.
ATA/100 : An updated version of ATA/66 that increases data transfer rates to 100 MBps.
ATA is also called Parallel ATA."
-From http://www.x-emi.com/tech_terms.html
Anyway, you can just buy any ATA-5 drive (Or get it from like another iPod) & then install it into yours.
Look here for some ideas: http://www.newegg.com/Product/ProductList.asp?Submit=ENE&N=201015001470000314&Subcategory=14&description=&srchInDesc=&minPrice=&maxPrice=&ATTR1=&ATTR 2=&ATTR3=&ATTR4=&ATTR5=&ATTR6=&ATTR7=201015001470000314
You can also install any CompactFlash Card, or CompactFlash MicroDrivein a 1st gen.

Can I install a 3TB drive in my mid-2007 24" iMac?

I'd like to know if I can install a 3TB drive in my mid-2007 24" iMac. The OTW page for this model says that 2TB is the maximum, but I think it was written before 3TB drives became available. Does anyone know if the controller will recognize drives larger than 2TB?

Hi,
First off it would need to be Serial ATA (3 Gb/s) compatible.
Looks like 4 TB is no problem in my research at OWC...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=272&type=Internal+Dr ive
http://eshop.macsales.com/MyOWC/Models.cfm

Cant install intel video driver

when i setup windows 7 32-bit and began ti intall driver the intel video driver didn't setup and this error msg appear anyone help me plz
laptop: hp probook 450 G1 core i7
This question was solved.
View Solution.

Hi:
Then you only install the AMD graphics driver which installs the drivers for both the amd and intel gpu's.
You cannot install the standalone intel graphics driver or allow windows update to install it either or the switchable graphics won't work.

Can't instal newest video driver

Similar Messages

Maybe you are looking for